ReviewsWelding Pin

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Support for external 5V~12V DC power supply, Support power supply by 9V battery..
The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..

Check Stock

B&W Trailer Hitches 1067 Chevrolet and GMC Gooseneck Hitch

Fits: 2001-2010 Chevrolet and GMC 3/4 Ton HD Long and Short Bed Trucks.
Fits: 2007-2010 Chevrolet and GMC 1 Ton (1 bed crossmember over the axle).
Bolts to existing holes in the frame with no drilling or welding.
solid, one-piece machined receiver socket.
Flexible latch pin handle attached to a spring loaded, 5/8" steel locking pin that goes completely through the ball.

Check Stock

TOPTOW ATV / UTV Hitch Adapter 64209, Fits for 2 inch Receiver, 2 inch Ball, with 5/8 inch Pin

3 in 1 MULTI FUNCTION: A draw bar with 1/2 inches dia. hook pin, for winch tow strap loops.
2 inch hitch ball, GTW 2000lbs, for 2 inch couplers.
A 3/4 inch hole for clevis mount connecting..
RECEIVER SIZE: The ATV/UTV ball mount fits for 2 inch by 2 inch hitch receiver tube openning on ATV, UTV, lawn tractor, trailers etc..
ROBOT WELDING: Advanced robotically welded 2 inches ball, extremely durable.
HITCH PIN KIT INCLUDED: Comes with the 5/8 inch hitch pin & clip, quick to install and secure to assemble.
CORROSION RESISTANT: Enhanced black powder coated, better appreance, also increased corrosion resistance.

Check Stock

SSC Controls Touch 4 TIG Welding Remote Fingertip Torch Hand Control 7 Pin Plug AHP Welders

TIG welding hand control for AHP welders (7 pin plug)..
Press to activate gas contactor and increase amperage through four levels..
Preset the weld current on your machine to where you want the current to be for the job..
25-ft cable with 7-pin plug for AHP TIG welders..

Check Stock

TOPTOW ATV / UTV Hitch Adapter 64031, 2 inch Ball, Fits for 1-1/4 inch Receiver, with 1/2 inch Pin

3 in 1 MULTI FUNCTION: A draw bar with 1/2 inches dia. hook pin, for winch tow strap loops.
2 inch hitch ball, GTW 2000lbs, for 2 inch couplers.
A 3/4 inch hole for clevis mount connecting..
RECEIVER SIZE: The ATV/UTV ball mount fits for 1-1/4 inch by 1-1/4 inch hitch receiver tube openning on ATV, UTV, lawn tractor, trailers etc..
ROBOT WELDING: Advanced robotically welded 2 inches ball, extremely durable.
HITCH PIN KIT INCLUDED: Comes with the 1/2 inches hitch pin kit, quick to install and secure to assemble.
CORROSION RESISTANT: Enhanced black powder coated, better appreance, also increased corrosion resistance.

Check Stock

Mophorn 787A+ Pulse Spot Welder 0.15mm Battery Welding Machine 220V Battery Spot Welder & Soldering Station Portable Pulse Welding Machine For Battery Pack 18650 14500 Lithium Batteries

Upgraded Led Lighting: The welding electrode is welded with double LED high-brightness lighting device. LED lighting type enhanced version is easy to....
Precise Pressure Regulator: The welding pin pressure can be continuously adjusted from 300g-750g to facilitate the welding of workpieces of different....
Distinct Lcd Panel: It shows pulse quantity and current when you are at work with this machine. The distinct panel also allows you to set current and....
Battery Tester & Charger: Test function is also available,convenient for the charging and test of battery. Therefore, you can get the internal....
Wide Application: Suits for various sizes of battery pack, button battery, polymer battery and protection board, Apple mobile phone camera, stainless....

Check Stock

WeldingCity 100-amp 10-ft Air-cooled MIG Welding Gun Torch Stinger Replacement for Miller Millermatic MIGmatic M-Series M-100/M-10 (248282)

Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal..
M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
Referenced part number from Miller: 248282 (M-100/10-ft).
Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A.
Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

RGBZONE 2 Pack 3M 9.9ft Extension Cable Connect Female Plug to RGB LED Strip Light with Free 4pcs 4pin Connector

Length:3M , 2pcs extension cable with 4pcs 4pin connector free.
Extension Connecting Cable for 5050 3528 SMD RGB LED Strip Lights.
A perfect solution for connecting led strip with controller or strip to strip connection.
4 pin quality cable wire,bended and notated.
No need welding,no need soldering,easy to use.

Check Stock

Titan Attachments Auger Bit Repair Hub 2' Female Hex 5/8' and 3/4' Pin Holes

...around when it comes to making highquality products, and this repair hub is no exception. Using expert craftsmanship and superior materials, this repair hub offers the best quality possible. Its made from cast alloy, making it a strong and durable piece of hardware..
EASY INSTALLATION: Our repair hub is designed for welding onto 2inch industrial tubing. With its multihole design, installing the repair hub is a piece of cake. Simply pull out your welding supplies and get to work. In no time, youll have an upgraded auger bit that will last you for years to come..
SPECIFICATIONS: This repair hub kit weighs approximately 11 lbs. It has an overall length of 8" and a diameter of 3 1/2". The pin holes measure 3/4" and 5/8" in diameter. The receiver shaft is 1/2" thick, making for an exceptionally sturdy construction that is sure to last for a long time. Finally, you can repair or upgrade your auger bit with this cast alloy hub..

Check Stock

MakerHawk 6pcs USB to DIP Adapter Converter, Mini USB Female, Micro USB Female, 2.54mm 4p USB Male, USB 2.0 USB 3.0 Female, USB Type B Square Interface Female to DIP PCB Power Breakout Board Module

Model number: Mini 5p USB Female Connector, 2.54mm 4p USB Male Connector, USB 2.0 4p Female Connector, USB 3.0 Flat Female Connector, Micro USB Type B Female Connector, USB Type B Square Interface Female Connector.
Mini USB to DIP, USB female connector mini 5p patch to DIP, welded adapter board. USB male to Dip, 2.54mm USB 4p to Dip, adapter board has been soldered mobile phone power data cable.USB 2.0 4p female connector to DIP, adapter board has been soldered mobile phone power cable..
USB 3.0 flat female connector to DIP module.Micro USB type B female connector to DIP, Mike 5p patch to dip, welding female power adapter. 6. USB type B square interface female connector to DIP adapter board.
Type of Pin Headers: three 4-pin Pin Headers, two 5-pin Pin Headers and a 9-pin Pin Header.
After-sales Service: We have a strong after-sales service team, as long as you have any questions about the product, we will solve your problem immediately after receiving your email, please click "MakerHawk-US" and click on how to send us an email "Ask a question" email us, looking forward to your inquiry, we will reply you within 24 hours.

Check Stock

REYSUN 864209 3 in 1 ATV/UTV Hitch Ball Mount Receiver Hitch Adapter with 2 inch Ball

★MULTI FUNCTION: A draw bar with 1/4 inch rise for tow strap loops.
2 inch hitch ball for 2 inch trailer couplers.
★RECEIVER SIZE: The ATV trailer hitch fits 2inch by 2 inch hitch receiver tube for towing ATV, UTV, lawn mower, tractor, trailers etc..
★ROBOT WELDING: This ATV hitch adapter was advanced robotically welded 2 inch hitch ball, extremely durable.
★PIN KIT INCLUDED: Comes with 5/8 inch hitch pin kit, fast to install and secure to assemble any towing accessory of ATV.
★CORROSION RESISTANT: Enhanced black powder coated, better appreance, also increased corrosion resistance..

Check Stock