ReviewsWelding Plug Connector

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.

Check Stock

4 Pin RGB Male and Female Connector Wire Cable(10 Pack) with 10 x Male 4 Pin Plugs for 5050 3528 RGB LED Light Strip

1.【Easy Installation】Easy to install no tool installation, no welding connection, 5050 4-pin RGB LED strip connector kit, plug and play.
2.【Flexible】LED Strip Jumper Connector are fully bendable and are perfect for extending a run of LED light strip across a gap, around an obstacle, or for making a bend and the other side contacts are open to stick in..
3.【Use Safety】 The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan,and the conductor is made of tinned copper and PVC insulation sleeve, the insulation layer is soft and flexible..
4.【Attention】When operate this connector,it need to be worked into all contacts touching at the right point and then lock them in, these connectors have little dimples to help lock in strip placement, it needed to be so exact in the placement of the strip..
5.【What you get】10 pack 4 Pin RGB Male and Female Connector Wire Cable with 10 x Male 4 Pin Plugs,when you received the item with any problem,please contact with us for after-sale service..

Check Stock

USB Female Type-B Port 4-Pin Right Angle PCB DIP Jack Socket-White 10 Pack by MUZHI

As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

Journeyman-Pro 2613 30 Amp 125 Volt NEMA L5-30R 2P 3W Locking Female Plug Connector Black Industrial Grade Grounding 3750 Watts Generator Rating L5-30R Female Plug

INDUSTRIAL GRADE: NEMA L5-30R, 2 Pole, 3 Wire, Locking Plug Connector Black/Yellow.
CLEAR SEE-THRU Wiring Block & Color Coded Positive Crimp Lock Wire Clamps Provides Visual Inspection.
30 Amp - 3750 Watts 125 Volts AC - Grounding Type Twist Lock.
HEAVY DUTY Use for Generators, Transfer Switches, Welding Equipment, RV, Trailer & Camper.

Check Stock

4 Pin Connector, Waterproof Industrial Solder Connector, Aviation Wire Connector for Automotive, Power, Marine, and Other Indoor/Outdoor Electrical Connection(Plastic Male Female Plug Socket)

4 Pin Connector Specifications: The working voltage of the power connector can reach 500VAC, and the rated current is 20A. General wire diameter: Φ9.0mm～Φ12.0mm.Cable specification: 2.5 --4.0mm²/14-12 AWG. Contact resistance.
High-Quality Material: Our 4 pin connector uses a PBT material shell that imports from abroad with stability, compression, anti-explosion, and anti-deformation. Using gold-plated contact with the superior performance of corrosion resistance and electrical conductivity effectively deals with temperature rise..
Easy to Install Plastic Connector: Cable connection type: Soldering. Adopt a bayonet-type fast locking connection, which is convenient, fast, safe, and stable. The precise structure positioning system ensures the safety and stability of the connection performance. The wiring welding temperature requirement is 380℃±40℃, operation time is: each point does not exceed 3 seconds..
Perfect Waterproof Cable Connectors: The waterproof connector design uses the multilayer waterproof and sealing system, from the plug, socket the two ends of the sealed waterproof ring, to the end of the clip line w....

Check Stock

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

Row to Row Distance(Approx):15.24mm/ 0.6".
As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

Journeyman-Pro 30 Amp Plug & Connector Set NEMA L5-30R & L5-30P 125V Locking Plug Socket Black Industrial Grade Grounding 3750 Watts Generators L5-30PR PLUG SET

INDUSTRIAL GRADE: NEMA L5-30R & L5-30P, 2 Pole, 3 Wire, Locking Plug Connector SET Black/Yellow.
CLEAR SEE-THRU Wiring Block & Color Coded Positive Crimp Lock Wire Clamps Provides Visual Inspection.
30 Amp - 3750 Watts 125 Volts AC - Grounding Type Twist Locking.
HEAVY DUTY Use for Generators, Transfer Switches, Welding Equipment, RV, Trailer & Camper.

Check Stock

DIYhz GX16 4 Pins Panel Metal Mount Circular Metal Aviation Connector Adapter Male Female Plug Socket (5 Pcs)

Widely used in data acquisition systems, computer automation measurement and control systems, mechnical equipment, audio/video, communications, automotive and other industries..
Ambient temperature: -50 °C ~ + 70 °C..
Package Content: 5 x GX16 Metal Aviation Plug Connector.

Check Stock

YaeTek 12PCS Oxygen & Acetylene Torch Kit Welding & Cutting Gas Welder Tool Set with Welding Goggles

Application - Welding and Cutting -- This YaeTek gas welding torch kit is used for cutting, welding, heating, with precision and efficiency..
Material -- heavy duty metal and brass, with high strength, durability, longevity. This welder torch Kit tool set is a great choice for both an amateur metalworker or a professional..
With a divisional box, convenient and easy to carry..
Packages Includes -- 3 copper pines, 1 welding pine connector, 1 cutting, 1 aluminum pin, 1 iron chrome-plated igniter, 2 copper joint, 1 wrench, 1 welding goggles, 1 storage box.

Check Stock

Ethernet Splitter Cable RJ45 Network Adapter, Onepeace 1 Male to 2 Female LAN Internet Cable Adapter, Suitable Super Cat5, Cat5e, Cat6, Cat7

Ethernet Splitter RJ45 1 to 2 allow 2 computers to share high speed DSL, cable modem or other Ethernet ports. NOTE: Don’t support 2 computers that connect to the internet simultaneously, ONLY 1 output port is working..
【Enjoy High-speed Internet Access】Pure Copper Gold-Plated Needle with Eight Cores, Watching movies, chasing dramas, surfing the Internet, playing games, etc., lossless transmission rate is fast, so that buffering is faster without waiting..
【Extensive Compatibility】Suitable for equipment with RJ45 interface, computer, router, network box, optical modem, can be used as an extension, compatible with Cat5/5e/6 7..
【Thicker PCB】The Ethernet splitter connector adopts thicker PCB board, gold-plated needle core, and integrated mechanical welding to avoid damage caused by wire leakage..
【Plug and Play】Connector A: 1 to 2 RJ45 Ethernet splitter, Connector B: RJ45 . This RJ45 1 to 2 RJ45 Ethernet splitter can help you avoid pulling cables back and forth, Installation simple and easy to use..

Check Stock