ReviewsWelding Stick Electrode Holders

Stick Electrode, 1/8 in. dia., 10 lb.

200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..

Check Stock

Welding Electrode Holder 400AMP Screw Type Red Handle

GREAT FOR MOST Arc, MMA, Hand Stick welding jobs.
HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections.

Check Stock

T TOVIA Stick Welding Electrode Holder ARC Stick Manual Screw Twist Type Head, 200 Amp

【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems..
【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications..
【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end..
【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections..
【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle..

Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..

Check Stock

WeldingCity Acetylene Welding Brazing Nozzle 4-W-J (Size 4) with W-J Mixer for Victor J-Series Handles

PARAMETERS: 5x5x7mm large triangular welding tip: high temperature resistant 304 stainless steel alloy. Fixed Weld Head: High temperature 316 stainless steel. 5mm standard round mouth..
LARGE TRIANGLE WELDING TIP: concave welding tip (the plastic electrode does not move after welding), which is suitable for drawing and fixing before welding..
FEATURES: 100% new and high quality, good high temperature resistance, smooth welding surface, non-stick welding rod, no scratches on the welded surface, more beautiful..
COMPATIBILITY: Mainly suitable for replacement nozzles for heat guns equipped with diaphragm pumps and vinyl heat guns..
APPLICATION: Special welding tip for welding PP, PVC, PE sheets, water tanks, water tanks, plastic pipes, etc..

Check Stock

Jacazooy Welding Electrode Holder 4.9ft Stick Copper Plier Ground Clamp MMA Mini Welding Rod Copper Clamp Tool Accessories With Cable

✔️The goods are mixed in black and white and shipped randomly. Please don’t take the order if you mindThe Welding Electrode Holder is made of all copper clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use..
✔️The Welding Ground Clamp is suitable for a welding arc.Features wide grip jaws to ensure a firm connection.Grounds work to be welded to a good electrical ground earth..
✔️ This welding accessories is made of copper clamp head, strong current.It is not easy to scald with pure copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion..
✔️The welding accessories have a common advantage: Copper guide, pure copper wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force..
✔️ The Welding Electrode Holder with cable is 6.5ft long and the Welding Ground Clamp with cable is 4.9ft long. Please allow the manual measurement data to deviate slightly. (0.1-0.2ft error).

Check Stock

ARC Stick Welder 200Amp 110V Welding Machine, Mini Welder Machine Beginners Welder With Display LCD Use Welding Rod Tools

...act light-weight design, it is convenient for welding indoors and outdoors. So you can work smarter not harder by bringing the welder to the work, the welder machine can be used anywhere you need.
☢【Easy to Use】1 x 110V ARC Welding Machine, 1 x Stick Welding Rod Electrode Holder, 1 x Arc Welding Ground Clamp, 1 x Welding Mask, 1 x Brush, 1 x Shoulder Strap, 1 x Welder Operation Manual.The arc welder 110v is easy to use, and only one button needs to be used to start any welding work. This mini welder machine is great for hobbyists and repairing items around the house. It can be used by a novice or welder, whether it is a male welder or a female welder.
☢【Multi-purpose Arc Welder Kit】The stick welder has amazing hot-start, is ideal for the rods 2.5mm. Powerful arc welder 200 amp capable of welding stainless steel, Carbon Steel, Medium Carbon Steel And Alloy Steel, aluminum, and other metal materials, very suitable for outdoor maintenance, farm, road equipment, and home DIY. 1 year warranty. If you have any further questions, pls don't hesitate to contact with us and we will reply you asap within 24 hours.

Check Stock

PrimeWeld MIG180 Mig Welder, 180 Amp Wire Feed Welding Machine With Dual Voltage 220v, 110v

...e MIG180 allows you to create excellent, intricate welding designs..
Amazing Performance - The MIG180 gives you three different welding processes. Like most MIG welders, you can run flux-core wire without gas using the same equipment as you do for MIG with gas. This machine also adds aluminum welding and includes an electrode holder for stick welding into your shop's arensal..
Aluminum Welding - Welding aluminum can be impossible without the proper equipment. PrimeWeld MIG180 solves the problem with its own special spool gun to alleviate any kinks or jams..
Multiple Features - This welder machine has dual 120/240 volts input and can be used as a DC stick welder (MMA), flux core welder (FCAW) and of course a MIG welder (GMAW). The Mig180 comes ready to use right out of the box! Drive Rollers for MIG and Flux are Included. This machine Also takes standard Tweco Consumables..
PrimeWeld's Promise - If for any reason you're not satisfied with your MIG180 MIG Welder Machine, simply reach out to Customer Support and we'll make things right for you! All Employees, Parts and Customer service Is located in the USA!.

Check Stock

Denso (4702) IK20TT Iridium TT Spark Plug, (Pack of 1)

Larger spark translates to more power and superior fuel economy.
0.4 mm iridium center electrode, world’s smallest diameter that maximizes firing potential.
0.7 mm needle tip ground electrode, promotes higher spark energy and less heat quenching.
DENSO patented 360 degree laser welding process, ensuring exceptional quality bond and structural strength with the iridium center electrode..

Check Stock

Denso 5308 Spark Plug

0.4 mm iridium center electrode: world's smallest diameter that maximizes firing potential.
U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching.
DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode.

Check Stock

Denso 5360 Spark Plug

0.4 mm iridium center electrode: world's smallest diameter that maximizes firing potential.
U-groove and taper cut ground electrode: provides faster spark flame growth and lessens heat quenching.
DENSO patented 360 degree laser welding process: ensuring exceptional quality bond and structural strength with the iridium center electrode.

Check Stock