ReviewsWelding Supplies Kit

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • USA-made 2 AWG heavy duty welding cable (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resis....
Check Stock

4-AWG Heavy-Duty AC Power Inverter Custom Cable Kit USA Cobra CPI-1575

  • Model: COB-1575-WIRE-4-KIT MPN: Does Not Apply.
  • WIRE KIT COMES WITH: 10 FT OF #4 awg Black Welding Cable 10 FT OF #4 awg RED Welding Cable 8 Ft OF #6 awg Black Welding Cable.
  • Features: Temperature Rating -50° C to 105° C Ethylene Propylene Rubber (EPR) Annealed stranded bare copper per ASTM B-172 Ozone, sun, weather,.
  • Country/Region of Manufacture: United States Brand: AC/DC WIRE AND SUPPLY.
Check Stock

WeldingCity TIG Welding Torch Accessory Kit 1/16 Collet-LARGE Gas Lens-Ceramic Cup-Gasket-Back Cap for Torch 17 18 and 26 Weldcraft Miller Lincoln Hobart ESAB AHP T17

  • Premium TIG welding torch accessory kit (LARGE gas lens set-up) for air-cooled and water-cooled TIG torch 17, 18 and 26 series for use with Tungsten....
  • Accessory kit contains torch consumables 10N-series collets and 45V large gas lens collet bodies (.040", 1/16", 3/32" and 1/8"), 53N/57N-series large....
  • Detailed content description for each accessory kit is shown in listed parts table and pictures. Compatible with TIG welding torches from Lincoln,....
  • For use with air-cooled TIG welding torch 17-series (150-amp) and 26-series (200-amp), water-cooled 18-series (350-amp)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Simple Soldering: A Beginner's Guide to Jewelry Making

  • 【Professional Function Design】This 60w 110v pencil-type soldering iron features adjustable temperatures(392 ℉-842 ℉/200-450 ℃) and thermostatic setting. In addition, our soldering iron with ON/OFF Switch, which is easy to save energy and ensure safe welding..
  • 【Heats Up Quickly & Heat Dissipation Efficiently 】Our soldering iron adopts the advanced ceramic heating core to heat up to reach the desired temperature within 15 secs. Four ventilation holes on the solder iron, reducing the temperature conducted from the tip to the handle..
  • 【Must-Have Soldering Iron Kit】Kit Includes soldering iron, simple stand, conventional sponge, 5pcs interchangeable iron tips, 50g fine 0.6mm tin lead rosin core 60/40 tin-lead solder, 50g no-clean solder rosin flux paste. It has all the materials you need to get started..
  • 【Wide Application】Widely used for welding circuit board, appliance repair, jewelry and metal headdress making, computer, and DIY. Perfect for beginners, welders, basic household equipment, welding engineer training, etc. Excellent Gifts for Fathers Day!.
  • 【Portable kit & Quality service 】Compared with soldering iron station, our soldering gun kit is portable to carry, just plug then use. Also, all MINGQ products are backed 2-year warra....
Check Stock

TTiiiiii 140Amp MMA Welder 110/220V Stick Welder Dual Voltage ARC Welding Machine Portable Welder Machine with Welder Kit Out of the Box

  • 1.【WHAT YOU GET】Welding kit includes 10*E7018(3/32 inch )Welding Rods, 1*MMA Welder,1*Welding Gloves,1*Folding Welding Cap,1*Welding....
  • 2.【Easy to use】This welder features a easy carrying handle,compact design, easy for translation and storage. This Welding Machine is great for....
  • 3.【SAFETY GUARANTEE】 Upgraded IGBT Inverter Technology, Powerful Welder Machine capable of welding mild steel, weld steel, stainless steel and....
  • 4.【ENERGY SAVING】TTiiiiii 140Amp MMA Welder, reduce the damage of copper and iron, the welding frequency is significantly increased, and the....
  • 5.【1 YEAR WARRANTY】Every piece of TTiiiiii welding tools is strickly inspected and quality control process, you can buy freely and rest assure to....
Check Stock

Welding Kit - Lap Joint Trainer Pyramid - 11 Gauge Steel Squares - Practice Training DIY - MIG TIG Stick Gas Arc Weld Other Squares

  • Get Straight to the Good Stuff... Welding.
  • Save Time Sourcing, Cutting and Preparing Practice Materials.
  • The Largest Square is 4" Wide. This Kit Packs Nearly 100 Inches of Lap Joint Welding!.
  • This Inexpensive Kit Welds Inside and Outside to Maximize Your Welding Practice per Dollar.
  • Laser Cut in the USA with USA Steel... Because it Matters.
Check Stock

WeldingCity TIG Welding Torch Accessory Kit Large Gas Lens Setup 1/8 Collet-Large Gas Lens-Cup-Gasket-Back Cap for Torch 9 20 and 25 Series Lincoln Miller Hobart ESAB Weldcraft CK AHP T45

  • Premium TIG welding torch accessory kit (large gas lens set-up) for air-cooled and water-cooled TIG torch 9, 20 and 25 series for use with Tungsten....
  • Accessory kit contains torch consumables 13NL-series collets and 45VS large gas lens collet bodies (0.040", 1/16", 3/32" and 1/8"), 53N/57N-series....
  • Detailed content description for each accessory kit is shown in listed parts table and pictures. Compatible with TIG welding torches from Lincoln,....
  • For use with air-cooled TIG welding torch 9-series (125-amp), water-cooled 20-series (250-amp) and 25-series (200-amp)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Professional welding tools and desoldering tool sets (12 pieces), desoldering pumps, desoldering wicks, wire cutters, tweezers, welding wire, soldering iron auxiliary accessories

  • Tool Kit：Suitable for electronic repair and DIY, any circuit board with small parts, such as mobile phone motherboards, cables, TVs, VCRs, radios, headphones, stereos, motors, toys and other electronic equipment. Correct the error of the small board on the PCB..
  • Tool Kit：includes 6 welding aids and desoldering pump, desoldering core, Wire cutters, anti-static ESD tweezers, 0.8mm solder wire.
  • Welding auxiliary tools: widely used in electronic repair, soldering, desoldering, etc. Can use cutting, scraping, hooks, brushes and other welding work requirements. Cutting pliers: Made of high-quality steel, it can accurately cut flexible cords within 1mm. Anti-static ESD tweezers: Made of high-quality stainless steel, anti-static, non-sticky..
  • Desoldering pump: very sturdy, can remove excess solder on the circuit board, easy to operate with one hand, desoldering core:width 2.5mm / 0.098 in,length 1.5m / 59 in length, made of pure oxygen-free copper It has a strong ability to absorb tin. No cleaning is required and less residue. Solder wire: 0.35 ounces / 10 g.
  • Tool Kit: Contains 12 necessary welding tools to save you multiple purchases..
Check Stock

Jackson Safety 3-Sensor Lens Plate Kit for Nitro ADF Welding Helmet, 5 Front & 2 Rear Safety Plates, 22603

  • Material: Made from impact resistant polycarbonate material, these lenses are manufactured for Nitro ADF Welding Helmets to effectively help protect against the radiation generated in welding operations.
  • Lens: This Jackson Safety Lens Plate Kit has a three-sensor lens, enabling welders to enjoy enhanced visibility and color recognition.
  • Benefits: With 5 front and 2 rear safety plates, the lenses in this kit will help prevent surface damage to welding filter plates and/or auto darkening filters.
Check Stock

9TRADING Welding Cabinet Cart for MIG TIG ARC Plasma Cutter Tank Storage Heavy Duty

  • Keep all of your welding supplies and tools organized in one place with this heavy duty welding cabinet. Smooth-rolling cart plus organized drawers....
  • Tough steel construction. 3 drawers and 1 cabinet bin. Smooth-rolling casters..
  • Platform for gas cylinders. Hooks for hose and cables..
  • Size (Cabinet): Approximately 28" x 14" x 20", Size (Overall): Approximately 34" x 20" x 33".
  • Note: Only the welding cart is part of this listing! The tools are only for demonstration purposes only!.
Check Stock

Harris SCLF16 Stay Clean Soldering Flux, 16 oz.

  • Nice Combination: the package comes with 1 solder wire, 1 no clean solder wicks, 1Soldering Flux & 6 welding auxiliary tools, enough quantity and practical toolset for welding and desoldering requirements.
  • 6 Welding Auxiliary Tools: To meet the welding operation requirements of press, cutting, scraping, hooks brushes, fork. Also, it can be applied to integrated circuit assembly and disassembly, precision electronic components.
  • Safe Rosin Paste Flux: Refined with weak acid flux, semi-solid, and not easy to pour. The most suitable flux for hobby and electronic assembly. Good for cables and large terminals. Removes oil or oxides, and improves wettability.
  • Solder Wick & Solder Wire: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive. Solder wire has a low melting point, flows smoothly, has fast soldering speed, and has strong solder joints.
  • Multifunctional Welding Kit: Ideal for repairs, auxiliary welding, and assembly work. For precision welding repair work such as fixing, removing, cleaning, etc., making the work easier.
Check Stock