ReviewsWelding Tool Clamps

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
【Work Great】Which are easy to remove and clean corrosi....

Check Stock

90°Angle Clamp-Single Handle Corner Clamp Heavy-Duty Right Angle Clamp/Welding Clamps for Welders | Welding Fixture 90 Degree Swinging Jaw Self-Centering Jig with Corner Clamp

HIGHLY DURABLE PRODUCT: PTS-FLAMINGO TOOLS corner clamps is made with cast iron, so it is extremely strong and durable, long lasting product that can....
REAL WORLD APPLICATION: This tool is engineered precisely and is incorporated with automatic adjustment of pressure jaw, for precise holding.....
EASY TO USE WELDING CLAMP: PTS-FLAMINGO TOOLS is a perfect choice for serious hobbyists or for Home DIY projects. This tool is applicable to welding,....
SPECIFICATIONS : This 4inch 90 degree tool is approximately 200x230x68mm(jaws closed). This product weighs only 3.5 kilograms. It consists of a....
FRIENDLY CUSTOMER CARE: For our respected customers, PTS-FLAMINGO TOOLS has your back. In case, you are facing any problems with PTS-FLAMINGO TOOLS....

Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

...R PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
Hex key adjustment screw for adjusting to the correct pressure.
Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
Each wood working clamp comes lightly pre-oiled fo....

Check Stock

XIEKRAB 2Pcs Heavy Duty 2 inch Muffler Clamps Rustproof, 2" Exhaust Pipe Diameter, Black Saddle Style U-Bolt Clamp

【Practical Tool】：Brand XIEKRAB Heavy duty u-bolt clamps exhaust saddle style..
【Material】：Made of high quality industrial steel with black zinc coating on the surface to prevent corrosion and rusting for use in bad weather..
【Durable & Safe】：Designed to ensure a tight, leak-resistant connection, XIEKRAB U-bolt clamps are manufactured from durable and robust material for long service life..
【Easy to Use】：Inside diameter (ID) Applicable pipe size,No welding design, easy to install and dismantle for use and improve efficiency..
【Package Content】 Includes saddle, u-bolt & nuts and one wrench，Carton packing..

Check Stock

IRWIN VISE-GRIP Locking Pliers, Welding Clamp, 9-Inch (25ZR) (Pack of 4)

LOCKING C-CLAMP SET: A 3 piece set of imperial C-clamps with precision screw adjustable locks and trigger releases in the most convenient sizes you’ll ever need – 1 x 6” fixed pad, 1 x 6” swivel pad and 1 x 11” swivel pad..
COMMERCIAL GRADE CHROME VANADIUM STEEL: Our C-clamps are drop-forged from chrome vanadium steel with nickel plated finish to withstand long-term corrosion for real durability. That’s made to last the distance..
BUILT TO LAST: Whether you’re a professional mechanic or a handyman looking to complete your tool kit, you need a set of these premium quality C plier set in your kit. Work great as welding clamps too..
ROLL-UP POUCH: We’ve included a handy numbered nylon pouch for your clamp set. It rolls up for easy storage or transportation, and can also be hung up for quick access. A bright orange internal lining finishes off this sturdy clamp organizer for easy visibility..
SATISFACTION GUARANTEED: At Kendo tools we stand by the quality construction and durability of all our products. We are fully committed to customer satisfaction with a lifetime warranty against any manufacturer defects..

Check Stock

MIKMAYTOO Small Quick Release Horizontal Toggle Clamp Hold Down Hand Tool 201A Hand Tool 60 lbs / 27kg (201-8PACK)

【Packing type】8 PCS hand tool Toggle Clamp GH-201 non-slip red horizontal clamp quick release tool.
【Holding Capacity】27Kg / 60Lbs, solid grip.
【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
【CLAMP SPECS】7.5 x 2.5 x 1.7cm/ 3" x 1" x 0.7"(L*W*H).
Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..

Check Stock

MIKMAYTOO Push Pull Action Toggle Clamps 6 PACK 301AM Latch Anti-slip Hand Tool 110Lbs Holding Capacity Quick Release Woodworking Clamp … (301AM)

【Packing type】6 PCS hand tool Toggle Clamp GH-301AM non-slip red Vertical clamp quick release tool. 100% manufacturer money back.
【Holding Capacity】90Kg / 198Lbs, solid grip.
【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
【Size】190 Degree Handle Opening Angle Plunger Stroke: 16mm/0.6"..
【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..

Check Stock

Corner Clamps 4Pcs Woodworking 90 Degree Clamps of Cast Metal, Durable Go-tool Right Angle Clamp with Adjustable Jaws Good for DIY Framing, Shelving, Welding, Fish-tanks, Cabinets

...g your busy hands without requiring more aligning and turning..
§【Versatility】: The woodworking corner clamps align two pieces of wood, planks, metal, or glass into the clamp at a 90-degree angle. Moreover, the right angle clamps set is suitable for fixing fish-tanks, joining photo frames, installing furniture, welding, and molding, featuring holes in the base that allow them to be mounted to a workbench to add more stability for setup..
§【Premium Quality】: The rustproof aluminum-alloy parts of the unit make the angle clamps exceptionally long-lasting and coating on the surface prevents corrosion without worrying subpar paints would rub off on your workpieces. The vise-like design can hold firmly up to 200 pounds of pressure and nylon rounds that keep you from damaging the pieces being joined..
§【Accuracy】: The accuracy of the corner clamps allows you to make and reinforce frames with precision featuring maximum clamping range of 3-inch. The swivel jaw can rotate the clamp to adjust work-pieces to different thickness. The reinforced connection and metal diagonal connection part of the angle clamps decrease the excessive pressure which can cause breaking..
§【Lightweight】: Weighing in at just over 1.25 pound, corner clamps with lightw....

Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

【WIDE APPLIACTION】Manually Operated HDPE butt fusion welding machine is suitable for PE and PP pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory.
【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
【EASY TO USE】Electric milling method is adopted, with single ....

Check Stock

YESWELDER Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, Suspender Fixture Adjustable Pads Kit(4 Pcs)

HIGH QUALITY ▶V-type magnetic welding clamps, sturdy and durable, can be used for a long time.
EASY TO USE▶Hold and position round, flat, and square Parts in light duty substructure applications!Easy to install and apply.
MAGNETIC HOLDERS▶ Magnets on the pad face only.
INCLUDE▶ Each item contains 4 pcs of Magnetic Welding Clamps.

Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..

Check Stock