ReviewsWelding Valve Test Bench

Lisle 36050 Valve Keeper Remover and Installer Kit

Quickly Removes and Installs Valve Keepers On Most Overhead Valve Engines With Valve Stems From 4.5 to 7.5mm and 5/16" to 3/8"..
Makes valve component disassembly and reassembly fast and easy. Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly..
To install keepers, load in retainer on valve stem, then push or tap handle to install. Can be used on the car or bench..
New smaller size works on Toyota four cylinder and Chrysler New World Engine applications..

Check Stock

American Standard RU101SS Flash Shower Rough-in Valve with Universal Inlets and Outlets with Screwdriver Stops, Unfinished

Choice of Connections: Fast and easy installation without adaptors reducing leak points.
Available connections include Universal (male thread/female sweat), PEX Crimp, PEX Cold expansion, CPVC, and Stub outs.
Cast Brass Valve Body: Durable. Ideal material for prolonged contact with water.
Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation.
Test Cap: Allows valve body to be tested and flushed without the presence of the valve cartridge.
Can be tested using test cap with air (200 psi) or water (300 psi).
Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws.
Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation.
It can serve as mounting support for thin wall installations.
Back to Back Capability: Hot and cold can be reversed quickly and easily.
Wide Rough in Range: From 1-3/4 Inches to 2-3/4 Inches from finished wall to the back of the valve.
Includes Screwdriver Stops for easy servicing at the valve.

Check Stock

Uniweld RHP400 Nitrogen Regulator with 0-400 PSI Delivery Pressure CGA580 Inlet Connection and 1/4-Inch Male Flare Outlet Connection 4-Pack

Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
Single stage Patriot series regulators with protective rubber gauge boots.
Front valve welding handle with stainless steel ball point valves for accurate gas control.
Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.

Check Stock

OTC 4573 Universal Overhead Valve Spring Compressor

OTC's Universal Overhead Valve Spring Compressor is a great option for compressing valve springs - facilitating valve spring removal or valve stem....
Ideal for use on installed cylinder heads, especially in vehicles with tight underhood clearances, but can be used for bench work as well.
Spring loaded jaws easily grip and compress valve springs.
Legs designed with a built-in offset to compensate for spring wind - keeping tool vertical and stable during use.
fits valve spring retainers up to 1-13/16 inch diameter.

Check Stock

DERACY Deluxe Adjustable Weight Bench for Full Body Workout Weight Capacity 1100 lbs Incline and Flat Weight Bench for Indoor Workout Home Gym

COMMERCIAL STANDARD. This weight bench is designed with unique triangle structure, steel welding base and heavy-duty steel, supports up to 1100 LBS,....
10-POSITION WEIGHT BENCH. DERACY adjustable weight beach has 10-backrest pad position and 4- front seat position, fully meet all your workout needs,....
COMFORTABLE & ERGONOMIC DESIGN. DERACY weight bench features dense foam padding throughout for a soft firm surface, reduce muscle fatigue when you do....
EASY TO ASSEABLE & MOVE. Package included manual and installation tools,very easy to assemble. With the back wheel, you can easily move the weight....
BUYING NOW. If you have any quality problem about the weight bench, Please contact with us at any time.

Check Stock

WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
U.S. based welding and hardware supplier. Strong technical support with experienced custom....

Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

[Propane Weed Burner Torch]: Whether you are removing weeds and ice, or soldering and cutting materials, the BISupply Welding Torch Flame Gun is perfect for all your needs.
This roofing torch generates temperatures up to 3000 degrees F (1649 degrees C) and connects to 20 lb. (9.1 kg) propane tanks (Tank not included).
[Versatile Tool]: This landscaping construction tool is perfect for homeowners, crafters, and professional contractors thanks to its versatility.
Burn weeds, melt snow, and remove paint using this propane torch.
Thaw pipes, heat roofing materials, and preheat metals for welding and soldering.
The lengthy torch and hose allow you to work safely and easily in hard to reach areas.
[Easy to Use]: Connect the blow torch and hose to the other end of the hose to a gas tank.
After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
Fire will extinguish naturally to remove gases from torch and hose.
[Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosio....

Check Stock

XtremepowerUS 55148 Oxygen Acetylene Welder Tool Kit w/3 Nozzles Cutting Torch 15' Hose Gauge Regulators

Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1 / 2 " with appropriate tips.
Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
A complete set includes a torch handle, oxygen regulator and acetylene regulator.
Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability.
Welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.

Check Stock

WP-17FV TIG Welding Torch 17FV Flex Head Body with Gas Valve Air Cooled 150 Amps

17fv tig torch have a flex head, it is easy to bend and can be used in many TIG welding process.
Flexible tig torch head is installed on a comfortable and light handle which have non-slip treatment.
Air cooling design, and a gas valve is on the wp17 torch head to control the air flow, help you do TIG work well.
The wp 17 torch can be uesed within 150 amp tig welding.
This is a flex head tig torch with a air valve, it usually be divided in tig torch 17 series.

Check Stock

FLYBIRD Flat Weight Bench Foldable 1000 LBS Weight Capacity for Strength Training Bench Press, 45.3 Inches Long Workout Benches for Home

【Superior Materials & Manufacturing】Excellent Welding guarantee Safety in the process of using FLYBIRD Flat Bench. Not flimsy piece of steel and refuse to cheap inferior materials. Our bench is reliable and can last for years. Rest assured it's not a monthly disposable bench..
【No Assembly Needed & Fold to Store】No Screws need to be installed and No Installation Problems like wobble and missing. Almost out of the box and very convenient. Easy to Fold & Store under bed or in closet. Perfect for small space and home gym..
【Extended & Thickened Cushion】45.3in Long bench fits for different people and gives you more space for better stretch. Well Padding let you get more comfortable workout. High quality PU Leather resists wear and tear from heavy bench exercise. No harmful pungent odor. Sweatproof and easy to clean..
【Extra Stability & Safety】Pin and Spring Lock keep the leg from shaking and provide double security. Non-slip Foot Caps increase stability on the uneven floor and it can be rotated to adjust. Inseparate Support Leg without screws avoids friction between the leg frame and the base..
【No Worry Buying From FLYBIRD Fitness】FLYBIRD Fitness attach great importance to the Quality and Customer Experience. Order FLYBIRD Flat Bench tod....

Check Stock

Plasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF

✅【Plasma Cutter】10-50Amp DC current output. The cutting machine offers a variety of welding and cutting abilities.
Compact plasma cutter has a Handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
ideal for a welding enthusiast or hobbyist with....

Check Stock