ReviewsWeldon Shank

DBM IMPORTS 1 Pc 3/4 x 60 Degree Premium HSS Dovetail Cutter Milling

  • Made of precision ground, high grade tool steel.
  • 60-degree included angle, right hand cutting tool.
  • Unit Dim L x W x H (in): 2-1/8 x 3/4 x 3/4 * Estimated*.
Check Stock

Evolution CC625 5/8-Inch Diameter x 1-Inch Depth of Cut Cyclone High Speed Steel Annular Cutter

  • 3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses.
Check Stock

Accusize Industrial Tools 9/16'' H.S.S. Aligning Reamer with 3/4'' / 0.75'' Weldon Shank, Spiral Flute, 0521-0916

  • HSS reamer has a specially designed cutting geometry that is designed to allow this aligning reamer.
  • Used in a magnetic drill which has ¾” Weldon shank..
  • The unique multi-flute design for a fast smoother cut and better finishing..
Check Stock

Annular Cutter Kit, 9 Cutter, 2 Bits, 11 Pc

  • 20% Thinner Wall Construction - Faster Cutting due to less material being removed for the same size hole. Duel Alternating Tooth Geometry - More aggressive cutting as well as increased chip ejection. Cuts up to 15% faster..
  • Proprietary Steel and 3 Hardness Zones - Makes the bit less susceptible to breakage. 3/4" Weldon Shank - Fits most small magnetic drill presses. One Centering pin size for all 2" depth cutters. Ejector pin sold separately..
Check Stock

CS Unitec 3/4' Weldon Tap Holder for 1/4' Diameter Taps - Mag Drill Tap Collet - Fits Standard Weldon Chucks On Most Magnetic Drill Presses (TCM 1/4)

  • FAST TAPPING: Adapter for 1/4" diameter taps, fast changeout. Tap chuck collets available for holding up to 3/4" diameter taps..
  • NO SPECIAL TOOLING NEEDED: Collets fit standard tap shanks. Can be used with variable speed, reversible and other mag drills..
  • 3/4" WELDON SHANK: Fits most mag drill chucks. Industry standard, 2 flat shank..
  • COMPACT: For easy transport, storage and use without impact on magnetic drill stroke..
  • HEAVY DUTY: High quality, long lasting, professional grade, Made In Germany. Recommended use with MAB 465 magnetic drill (ASIN B08QGSPFDD).
Check Stock

CS Unitec 3/4' Weldon Tap Holder for 3/4' Diameter Taps - Mag Drill Tap Collet - Fits Standard Weldon Chucks On Most Magnetic Drill Presses (TCM 3/4)

  • FAST TAPPING: Adapter for 3/4" diameter taps, fast changeout. Tap chuck collets available for holding up to 3/4" diameter taps..
  • NO SPECIAL TOOLING NEEDED: Collets fit standard tap shanks. Can be used with variable speed, reversible and other mag drills..
  • 3/4" WELDON SHANK: Fits most mag drill chucks. Industry standard, 2 flat shank..
  • COMPACT: For easy transport, storage and use without impact on magnetic drill stroke..
  • HEAVY DUTY: High quality, long lasting, professional grade, Made In Germany. Recommended use with MAB 465 magnetic drill (ASIN B08QGSPFDD).
Check Stock

Accusize Industrial Tools 4 Pc 60 Degree H.S.S Dovetail Angular Cutters Right Hand Weldon Shank 4400-6206

  • Right hand cut. Weldon shank. For cutting dovetails and angles in materials.
  • 60 degree corner cutter set for dovetail machining.
  • Designed to take the place of arbor & threaded holes type cutters..
  • Size includes: 3/8", 1/2", 3/4", & 1-3/8".
Check Stock

Steel Dragon Tools® AC2-7PCLG 7PC Annular Cutter Kit Depth 2\ Large Sizes 1\ - 2\ 1 Pin

  • Kit includes six (6) high-speed steel annular cutters and one (1) pilot pin..
  • SDT annular cutters will drill large holes up to ten times faster than regular drills bits..
Check Stock

3/4\ Diameter 60 Degree Dovetail Cutter, HSS, 5/16\ Wide 3/8 Shank, High Speed Steel, Super Tool, 84963, USA Made

  • 60-degree included angle, right hand cutting tool.
  • Made of precision ground, high grade tool steel.
  • Overall Dimension: 3/8''L x 3/8''W x 2-1/8''H.
Check Stock

Drill America 1/2\ 60 Degree High Speed Steel Weldon Shank Dovetail Cutter, DWC Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • Designed for fast, efficient hole making.
  • Dovetail cutters cut only that material necessary to produce a quality hole.
Check Stock

Drill America 3/4\ 60 Degree High Speed Steel Weldon Shank Dovetail Cutter, DWC Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.
  • Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
  • Designed for fast, efficient hole making.
  • Dovetail cutters cut only that material necessary to produce a quality hole.
Check Stock