ReviewsWell Point Pumps

iMeshbean® Submersible Well Pump 110V with Control Box, 4\ Deep Well Pump 1.0 HP 33 GPM, 207' Head,100FT Power Cord,Stainless Steel

4" deep well submersible pump. 1HP, 110V, 10.2 Amps , 1-1/2” NPT discharge. Fits in a 4" casing..
33GPM max & 207ft head are greater than almost all other 1HP well pumps, and comparable to other pumps, but uses less electricity..
100' / 30M long electric cord comes with this submersible deep well pump..
This pump has a built in check valve. However installing additional check valve is recommended.

Check Stock

LuoQiuFa M5 Flat Washer Copper Sealing Ring, Inner Diameter 5mm, Outer Diameter 9mm, Thickness 1mm, Metric Sealing Washer, 50 Pieces

Inner Diameter: 5mm/0.2" Outer Diameter: 9mm/0.35".
Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers..
Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C.
Widely applied in the flange and the connection of the chemical plant, electricity generating station, nuclear power station, and electronic, digital consumer products, hardware, precision instruments, electrical appliances, bearings, air pumps, water pumps, water valves, air cylinder, sealing the high pressure braking systems.ect..
High quality copper washers are constructed to uphold strength and ultimate durability during tough operations..

Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

... waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated....

Check Stock

LUOQIUFA M8 Flat Washer Copper Sealing Ring, Inner Diameter 8mm, Outer Diameter 16mm, Thickness 1.5mm, Metric Sealing Washer, 20 Pieces

Inner Diameter: 8mm/0.32" Outer Diameter: 16mm/0.63".
Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers..
Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C.
Widely applied in the flange and the connection of the chemical plant, electricity generating station, nuclear power station, and electronic, digital consumer products, hardware, precision instruments, electrical appliances, bearings, air pumps, water pumps, water valves, air cylinder, sealing the high pressure braking systems.ect..
High quality copper washers are constructed to uphold strength and ultimate durability during tough operations..

Check Stock

LUOQIUFA M10 Flat Washer Copper Sealing Ring, Inner Diameter 10mm, Outer Diameter 14mm, Thickness 1.5mm, Metric Sealing Washer, 30 Pieces

Inner Diameter: 10mm/0.39" Outer Diameter: 14mm/0.55".
Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers..
Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C.
Widely applied in the flange and the connection of the chemical plant, electricity generating station, nuclear power station, and electronic, digital consumer products, hardware, precision instruments, electrical appliances, bearings, air pumps, water pumps, water valves, air cylinder, sealing the high pressure braking systems.ect..
High quality copper washers are constructed to uphold strength and ultimate durability during tough operations..

Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

... waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties. The West System 205 Fast Hardener is formulated....

Check Stock

Little Giant 599025 1-1/4-inch MNPT x 3/4-inch GHT Garden Hose Adapter for Utility Pumps and Sump Pumps with 1-1/4-inch FNPT discharge Black

APPLICATION: allows use of 3/4-inch standard garden hose with pumps equipped with 1.25-inch FNPT discharge.
SPECIFICATIONS: 1.25-inch MNPT x 3/4-inch GHT threaded.
length = 1.80 inches x 1.84-inches at widest point.
EASY INSTALLATION: hexagon shaped allows adapter to be installed easily and securely.
REPLACEMENT ADAPTER: for Little Giant 6-CIM and 5.5-ASP utility pumps.
NOTE: performance of pump will be reduced by approximately 15% when using adapter as opposed to using 1-1/4-inch pipe or tubing.

Check Stock

iMeshbean® Deep Well Submersible Pump with External Control Box, 1 HP, 115V, 60 Hz, 33 GPM, 207' Head,100' Power Cord Stainless Steel, 4\ ,Long Life M#010 USA

4" deep well submersible pump. 1HP, 110V, 10.2 Amps , 1-1/2” NPT discharge. Fits in a 4" casing..
33GPM max & 207ft head are greater than almost all other 1HP well pumps, and comparable to other pumps, but uses less electricity..
100' / 30M long electric cord comes with this submersible deep well pump..
NOTICE:This pump has a built in check valve. However installing additional check valve is recommended.

Check Stock

C.Paravano Slingback Pumps I Women's Pumps I Slingback Heels for Women I Women's Slingback I Slingback Pumps I Beige Slingback Pumps I Beige Slingback (Size 38, Beige HEELS)

POINTED TOE : Soft closed toe sandals would adapt your toes shapes flexible, and wrap the toes well in beauty..
FIT COMFORT : These slingback pumps crafted a full leather lining, elasticated straps and rebound padding system give your feet extreme breathing and a slim look..
SLINGBACK STYLE : They’re cut to a point in mixed fabric and color to sleek silhouette, adding the hollow out design of upper for free to prom, party or office..
C.Paravano has become a symbol of elegance and effortless glamour. Our goal always remains the same: to provide the perfect shoes that cater to all your needs..

Check Stock

Wayne 60017-001 Float Top Replacement Kit

Service Repair kit for cast iron 0.75 HP shallow well jet pumps.
Service kit includes an impeller, diffuser, motor shaft seal (mechanical seal), diffuser gasket and pump body gasket.
This kit fits the Star ES07S, Flint & Walling EK07S and Zoeller 1461-0006 model jet pumps.

Check Stock

Intex Large Pool Plunger Valve Assembly

Includes: (1) Intex Large Pool Plunger Valve Assembly.
Requires an Intex Pool with 1.5" hose fittings to work properly.
Works with the Intex 1500, 2500 and 4000 gallon per hour filtration pumps as well as the Intex Saltwater Chlorinator and Intex 2000 gallon per hour....
Replace your old plunger valve(s) or upgrade to the Intex Plunger Valve system, makes changing hoses and pumps a breeze!.

Check Stock