ReviewsWet Tile Saw Under 300

Lackmond Beast Pro Porcelain Saw Blade - 7" Hard Tile Cutting Tool with Thin Kerf Cutting Edge & 5/8" Arbor - BP7

  • CONTINUOUS RIM CONFIGURATION – For clean and precise cuts wet cuts of porcelain and stone tiles.
  • EXPERT DESIGN – The thin Kerf cutting edge eliminates chipping while cutting. The beast porcelain tile blades are engineered with a reinforced silent core hub which ensures straight cuts and reduces noise. Intended to cut porcelain,, marble, granite, an ceramic tiles.
  • BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious DIYers, and tradesmen.
  • EQUIPMENT – Designed to be used on hand grinders, circular saws, hand held saws and chop saws.
Check Stock

Delta Diamond Piranha Premium 7 Inch Tile Diamond Saw Blade, Continuous Rim, DM-7/8\-5/8\ Arbor, Dry or Wet Cutting Porcelain & Ceramic Tiles (7\)

  • ...unning the blade through a dressing stone or paver to expose new diamonds..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

DEWALT 4-3/8-Inch Tile Blade, Wet/Dry (DW4738)

  • Extended performance diamond matrix provides long life and enhanced material cutting for the dry/wet saw blades.
  • Continuous rim design of the tile saw blade provides chip free cutting in all types of tile.
  • XP2 and XP4 blades designed specifically for high power tile saws, allowing quick, free, low heat, and straight cutting.
  • XP2 and XP3 blades with laser cut expansion slots eliminate blade warping due to heat build-up.
  • Premium XP2 and XP4 cutting matrix means XP2 gives 2 x's the life of standard blades, XP4 gives 4x's the life of standard blades.
Check Stock

EZARC 4-1/2 inch Diamond Blade, Super Thin Diamond Saw Blades for Angle Grinder, 4.5\ Tile Blade for Cutting Porcelain Ceramic Granite Marble Tile (2-Pack)

  • ★【Long Lasting Diamond Blade】High performance alloy steel matrix with consistent diamond content and even distribution provide long life, enhanced material removal. Our tile blade with 10 mm segment height guarantees a long lifetime even in the most demanding materials..
  • ★【Superior Performance】Diamond saw blades with super thin X teeth turbo mesh rim not only offer the cleanest and smoothest cuts in different abrasive materials, but also reduce chipping and side friction. Our grinder diamond blade has good cutting quality without broken edges, even on super hard fine slate and marble..
  • ★【Fit Size】Our 4.5" diamond blade is suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor (Includes a adaptor for 20mm arbor). Size:4-1/2 Inch.
  • ★【Professional Design】This diamond tile blade with integrated flange design provides the best cutting quality straight, vibration-free cutting and enhances stability and safety. Silencer Holes help to low down the noise and avoid heat damage during the cutting process..
  • ★【Wide Applications】EZARC tile cutter blade is designed for extremely smooth and clean cutting porcelain, granite, ceramic tile, sandstone quart....
Check Stock

Buflex Wet Polishing Sheets, Black K-3000, PSA Stickon, 191-1501, 25 Sheets

  • Covert your wet cutter saw into a dustless dry cutter with this vacuum attachment.
  • Vac accessory minimizes dust while you cut.
  • Works well for applications involving concrete, tile, dry wall, and other surfaces that produce a lot of dust.
  • Fits Husqvarna model K3000 wet cutter saw.
Check Stock

Lackmond Beast Thin Wall Tile Drill Bit - 3/4 Ceramic and Porcelain Hole Saw with Continuous Thin wall Configuraiton & 5/8 Arbor - BPB34

  • VERSATILITY ON THE JOB – BEAST thin wall tile bits provide extremely clean, accurate, and chip-free cutting in a variety materials. Typically used....
  • CONTINUOUS RIM, THIN WALL CONFIGURATION – BEAST thin wall tile drill bits are engineered with the cleanest and most precise cutting configuration.
  • BUILT FOR THE PROFESSIONAL – This is the ideal hole saw for construction workers, carpenters, contractors, serious DIYers, and tradesmen. The....
  • EQUIPMENT – Fits BEAST drilling system, has 5/8”-11 threaded arbor to fit hand grinders.
Check Stock

Pacesetter G02771 Portable Tile Wet Saw 7 in Blade Diam Water Reservoir System 3550 RPM Rip Fence and Angle Gauge Pack of 1

  • Use this tile wet saw to cut through ceramic tile, porcelain tile, marble, slate and stone up to 1-3/16 in. thick.
  • This handy tile cutting saw includes a water reservoir system to keep the blade cool and lubricated during use.
  • Features a tilting chrome-plated table that adjusts from zero to 45 degrees for making detailed bevel cuts, an adjustable rip fence and an angle gauge....
  • Uses 7 in. diameter cutting blades on 5/8 in. arbor and runs at a maximum 3, 550 RPM.
  • Blade guard is included for safety. Overall width measures 18. 7 in. wide x 15. 9 in. deep.
Check Stock

Resistance(s) - Vol. 1 ( Dansons / Transit / Dieu Me Pardonne / Wet Tiles / Allahu Akbar / Beauty Never Ends (Untitles Part 3b) / K3 (Les Femmes) / From Beyrouth With Love (Ca Sera Beau) ) ( Resistanc

  • For wet cutting at speeds up to 8,730 RPM.
  • 5/8 in. arbor fits most brands of wet tile saws.
Check Stock

QEP 6-7006GLQ 7-Inch Continuous Rim Glass Tile Diamond Blade 7mm Rim Height 5/8-Inch Arbor Wet Cutting 8730 Max RPM

  • For wet cutting at speeds up to 8,730 RPM.
  • 5/8 in. arbor fits most brands of wet tile saws.
Check Stock

SKIL 3601-02 Flooring Saw with 36T Contractor Blade, Red and black

  • Bevel cuts tile from 0 to 45 degrees - flexibility for different cut types..
  • Adjustable rip fence with miter gauge - for accurate straight and miter cuts..
  • Blade cooling water reservoir - keeps blade cool and minimizes dust and debris..
  • Powerful induction motor - supply generates up to 3,550 RPM for the most demanding jobs..
  • 100% Satisfaction Guaranteed: With a manufacturer warranty you can be sure you will get a quality wet tile saw.If you get a poor saw,contact with us,we will supply a new one..
Check Stock

FS Tool SM6300 Miter Joint Saw Blade 12 Inch X 100T, 1″ Bore

  • Compatible with the R300DCT Concrete Cutting Saw and the R300DCT+ Concrete Cutting Saw.
  • Hot pressed and higher diamond concentration delivers 10% faster cutting and longer life than our general purpose diamond blade *Internal Testing.
  • Engineered for aggressive cutting on both hard and abrasive masonry, hard brick, block, roof tile, pavers, stone, concrete, and steel re-inforced concrete.
  • Ideal for professional hardscapers and masons.
Check Stock