ReviewsWheel Bearing Extractor Kits

SIM TOOLS LCAT6803 Lower Control Arm Tool

  • The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing..
  • After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support..
  • The joint wedges again in the cone after it was pressed down only briefly with a tyre lever.
  • The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away..
  • With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use)..
Check Stock

2 DTA Front Wheel Hub Wheel Bearing Repair Kits Left Right Compatible with 2006-2013 Mazda 3, Mazda 5. Replaces Dorman 930-003, Timken 510096

  • 2 Front Wheel Hub and Bearing Kits Compatible with 2006-2013 Mazda 3, Mazda 5..
  • NOTE: One side of bearing with magnetic ABS tone ring, that side needs pressed inside knuckle facing the ABS sensor.
Check Stock

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

LIBRA Trailer 5 Lugs Idler Hub Kits 5 on 4.5 5x4.5 for 3500 lbs Axle 22017K Pack 2

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719" x 2.565", 2x E Z lube grease caps with rubber plug.
  • Libra Trailer Parts has been supplying US trailer manufacturers OEM parts 15 years..
Check Stock

Manual Sugarcane Juicer Crusher Machine Commercial Sugar Cane Press Juicer Machine Sugar Cane Extractor Squeezer with 2 Peeling Knives

  • 【3 heavy duty rollers】: This rollers of the manual sugar cane juicer are designed to be galvanized iron due to pressure requirements. And it....
  • 【Multi gear drive】: This commercial sugarcane press extractor has several gears. The gears help each other and bite each other, so it is easier....
  • 【Delicate filter】: This sugar cane squeezer is equipped a stainless steel Filter disc with fine large-scale filter screen, which can ensure that....
  • 【Big hand wheel】: This manual sugar cane extractor has the design of enlarged diameter hand wheel, which can make it easy to operate. If the....
  • 【Easy cleaning】: This sugarcane press extractor adopts food grade stainless steel juice box and high quality faucet, both of them make it easy....
Check Stock

13 Inch Wheelbarrow Tires, 4.00-6 Flat Free Wheelbarrow Tire, 5/8" or 3/4" Bearings Solid Rubber Tire Replacement for Wheel Barrel Garden Cart Wagon, Includes Adapter Kit (Solid Rubber Flat Free)

  • 【13” Wheelbarrow Tire】 - 13.2 inches actual outer diameter of the tire fits tire size4.00”-6”(3.50/2.59-8”). Hub Length: 1.75”-3”-5”-6”. Bearing Size: 5/8” or 3/4”, Rim Diameter: 6”, Not for highway use with a maximum 300lbs load capacity..
  • 【4.00-6” Flat-Free Tire for Residential Wheelbarrows】- This tire and wheel assemblies are perfect replacements for wheelbarrows with 4.00” x 6” tire sizes. The most common types of wheelbarrows that use these tire sizes are 4cubic feet wheelbarrows and regular residential wheelbarrows..
  • 【Comes with Adjustable Adapter Kits 】- This flat free wheelbarrow tire pre-assembled with 1.75” centered hub and 5/8” bearings. The adapter kit comes with two 3/4” bearings, two 0.5” wide nylon spacers and two 1.57” wide nylon spacers..
  • 【Premium Ribbed Treads Tires】- Our wheelbarrow replacement tires are flat free and made of solid polyurethane foam, ribbed thread. They would provide maximum traction and maneuverability in rough and uneven terrain, both is wet and dry conditions..
Check Stock

Happybuy Honey Extractor Bee Honey Extractor Electric Honeycomb Spinner 2 Two Frame Stainless Steel Beekeeping Accessory (2 Frame Electric Honey Extractor)

  • 【MAIN PARAMETER】- Frame Number: 2 frames.
  • Material:food grade stainless steel;Outlet size:2 inch.
  • 【USE HIGH-PRECISING BEARING】- This bee honey extractor use high-precision bearing, so it has higher rotation speed, longer service life than ordinary honey extractor.
  • 【FILLY ENCLOSED TRANSMISSION】- The honey extractor adopts fully enclosed transmission box, pollution-free environmental design, which makes transmission easier.
  • 【Anti-Corrosion & Anti-Rust Material 】- The barrel and inner frame uses food grade steel, safe and healthy. The holder adopts steel, which is not easy to rust and can be used outdoors.
  • 【BOTTOM INSIDE OF DRUM】- It is conical shaped and drains honey to the 2-inch outlet with stopper/honey gate.it’s a professional beekeeping equipment, It's smooth and efficient to help you to get honey as much as possible, and it can save the user time and labor.
Check Stock

8629 Wheel Hub Removal Tool & 6007 Lower Control Arm Prying Tool & Brake Caliper Hooks

  • The wishbone extractor tool is for pushing down the wishbone and other suspension parts for example during the disassembly of the drive shaft or during the replacement or exchange of the wheel bearing..
  • After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabiliser tension in order to pull the joint from the support..
  • The joint wedges again in the cone after it was pressed down only briefly with a tyre lever.
  • The ball joint or gaiter gets damaged, the mechanic injures himself or damages suspension parts when the tyre lever slips away..
  • With this lever tool the work can be accomplished safely and comfortably by one person (no mauling on your own making it safe and simple to use)..
Check Stock

OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit Back and Front Wheel Bearing Puller Kit Back and Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and....
  • FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing....
  • UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove....
  • SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as....
  • WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing.
Check Stock

Pivot Works New Wheel Bearing Kit PWRWS-K01-000 for Kawasaki ER 5 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006, ZX 550 A GPZ 1984 1985 1986 1987 1988 1989, EX 500 Ninja 1994-2009

  • Kawasaki ER-5 (Euro) 1997 – 2006. Kawasaki EX250 Ninja 1986 – 2012. Kawasaki EX300 Ninja 2013 – 2017. Kawasaki EX300 Ninja ABS 2013 – 2017. Kawasaki EX305B1GP 1983. Kawasaki EX500 Ninja 1994 – 2009. Kawasaki ZX550 GPZ 1984 – 1989..
  • Exact OE replacement bearing and seal kits bring back the steering and braking control lost due to worn or rusted wheel bearings.
  • Double-sealed ball bearings keep moisture and contamination from entering bearing.
  • Each kit includes necessary bearing and seals.
  • Seals ensure exact fitment, keeping debris out.
Check Stock