ReviewsWheel Hub Assembly Thread Repair

Replacement Front Wheel Hub Bearing Assembly Set of 2 - Compatible with Chevy, Buick, GMC Vehicles - Rainier, SSR, Trailblazer, Envoy, Bravada, 9-7x - Replaces 951-056, 12413037, 15130858, 513188

  • Replacement Wheel Bearing Hub Assembly 6 Lugs - With ABS Speed Sensor Cable - is a crucial part of the drivetrain as it enables the wheels and tires to rotate smoothly without friction. Wheel hub bearing problems can easily be identified by loud noises from the wheel area, loose steering or unwanted movement, vibration and uneven tire wear..
  • Compatible Replacement for Chevrolet, Buick, GMC, Saab & Oldsmobile Vehicles - 2004 - 2007 Rainier | 2003 - 2006 SSR | 2002 - 2009 Trailblazer | 2002 - 2006 Trailblazer EXT | 2002 - 2009 Envoy | 2002 - 2006 Envoy XL | 2002 - 2004 Bravada | 2005 - 2009 9-7x |..
  • Replaces Part# 951-056, 12413037, 15130858, 513188, 951056 commony found on popular Rainier, SSR, Trailblazer, Envoy and Bravada vehicles including year models 02, 03, 04, 05, 06, 07, 08, 09. The wheel hub bearing can easily be accessed by removing the wheels of the vehicles and fits the front wheels only..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory wheel hub bearing assembly on your vehicle and includes a more durable ABS wheel speed sensor and cable pre-installed. Installation is easy with no special tools required and it will fit, look, and work like the factory wheel hub bearing..
Check Stock

ZKTOOL Lower Control Arm Prying Tool,2 Pack Specialty Tools for Mechanics Lower Control Arm Tool,Suspension Specialty Bushing Tool, Designed to Work With a 7/8 in Diameter Pry Bar.

  • 【8629 Wheel Hub Removal Tool】Universally applicable to all axle bolted hubs (5, 6 and 8 lug hubs). Used to safely remove the frozen hub assembly instantly without damaging the axle..
  • 【6007 Lower Control Arm Prying Tool】For most front-wheel drive vehicles. suitable for the lower control arm.
  • the eyelet end is suitable for any 7/8" crowbar. Used to help the installation of wheel bearings, front axles and CV joints..
  • 【Brake Caliper Hooks】used on variety of automotive repair work that related to brakes, wheel bearings, axle shafts and suspension servicing. Prevent the brake caliper from obstructing operation during maintenance, reducing damage to the brake caliper, brake hose and other parts..
  • 【Superior Material】Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant. Wheel Hub Removal Tool 3/4” steel backing plate and reinforced striking platefor a long-term and reliable performance..
  • 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty..
Check Stock

Front Wheel Hub Bearing Assembly - Compatible with Chevy, Cadillac and GMC 4WD - Escalade, Avalanche, Silverado 1500, Suburban, Tahoe, Sierra, Yukon - Replaces 515096, 930-611, 10393171, 22841381

  • Replacement Wheel Bearing Hub Assembly 4WD 6 Lugs - With ABS Speed Sensor Cable - is a crucial part of the drivetrain as it enables the wheels and tires to rotate smoothly without friction. Wheel hub bearing problems can easily be identified by loud noises from the wheel area, loose steering or unwanted movement, vibration and uneven tire wear..
  • Compatible Replacement for Chevrolet, Cadillac & GMC 4WD Vehicles Only with 6 Lugs - 2007 - 2014 Escalade | 2007 - 2014 Escalade ESV | 2007 - 2013 Escalade EXT | 2007 - 2013 Avalanche | 2007 - 2013 Silverado 1500 | 2007 - 2014 Suburban 1500 | 2007 - 2014 Tahoe | 2007 - 2013 Sierra 1500 | 2007 - 2014 Yukon | 2007 - 2014 Yukon XL 1500 |..
  • Replaces Part# 515096, 930-611, 10393171, 22841381, 930611, 25918329, 25976819 commony found on popular Sierra, Silverado, Avalanche, Escalade, Yukon XL 1500 vehicles including year models 07, 08, 09, 10, 11, 12, 13, 14. The wheel hub bearing can easily be accessed by removing the wheels of the vehicles and it fits either left or right of the front wheels..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement for the factory wheel hub bearing assembly on your vehicle and includes a more durable ABS wheel speed sensor and cable pre-insta....
Check Stock

HICKS 2.0\ ATV Wheel Spacers (4x110, 74mm Bore, 10x1.25 Studs Nuts) Compatible with Various Honda Yamaha Suzuki Bombardier UTV V1 50mm Black 4pcs

  • ... Wheel Spacers - Fits machines with 4/110 Bolt Pattern, a hub lip (center bore) not larger than 74.1mm, and M10x1.25 10x1.25mm wheel studs. Works with various ATV, UTV, Side by Side, Quads..
  • Package: Set of Two (2) wheel spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x110 | Hub Center Bore: 74.1mm | Stud/Nut Thread Pitch: 10x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs..
  • Solid Quality: Made from 6061-T6 aircraft-grade aluminum billet, with heat-treated and hardened 10.9 grade bolts.Strengthening the connection of bolts and the holes for without vibration.The anodized surface for corrosion resistance and durability.Easy to install..
  • INSTALLATION:Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can install themselves, we always recommend professional installation especially if it is your first time installing auto accessories. IMPORTANT SAFETY ADVISORY: Torque lug nuts to manufacturer specifications. Check and re-torque all hardware, including lug nuts securing adapter t....
Check Stock

Kinbelle Rear Hub Adapter Sprocket 44T for Mag Wheel Gas Motorized Bicycle 2 Stroke Engine Kit

  • The 44T Sprocket and Adapter Assembly is a durable aluminum unit that provides fast and easy installation.
  • The 44T Sprocket and Adapter Assembly is only compatible with the 415 Heavy Duty Chain.
  • The sprocket and adapter assembly ensures concentricity with the wheel hub by using the unique two piece adapter that wraps around the rear wheel hub....
  • Hub adapter suite for simultaneous use of disc brake and gasoline engine teeth in rear wheel modification of integral wheel bicycle.
  • This is is unique and special design,sprocket 44T& adapter.
Check Stock

Detroit Axle - Front Wheel Bearing Hub Assembly and Drilled Slotted Brake Kit Rotor w/Ceramic Pad Kit for 00-02 Ford Excursion - [00-04 F-250/350 Super Duty] - 4WD Coarse Thread SRW

  • SRW with Coarse Thread Wheel Studs) - [2000-2004 Ford F-250 Super Duty (4WD (Built After 3/22/99 Production Date)....
  • Kit Includes: (2) Front Wheel Bearing & Hub Assembly, (2) Front Drilled and Slotted Disc Brake Rotors, (2) Front Ceramic Brake Pads(Hardware....
  • Hub Specifics: 8-Lug Count, with ABS, and 4 Flange Bolts - Wheel Hubs are designed to meet stringent fatigue requirements to reduce premature failed.
  • Drilled & Slotted Disc Brake Rotors (Up To 20% Better Braking Power than Standard Rotors ) - Zinc Dichromate Plating (Rust Protection) - Authentic....
Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 2pcs

  • ...1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
  • 2) Wheel studs are M12x1.25 12×1.25mm threads.
  • 3) You have 1.0″ (25mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.0″ (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 5) Wheel center bore needs to be no smaller than 56.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Adapter Spacers | Thickness: 1.0″ (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5×114.3 (5×4.5″) | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12×1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs..
  • [PRODUCT BENEFITS] Allows you to install 5×114.3 (5×4.5″) Wheels on your vehicle. Hubcentric design ensures the spacer bore fits perfectly around 56.1mm vehicle hubs and the 56.1mm lip functions as an extension of th....
Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 4pcs

  • ... 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
  • 2) Wheel studs are M12x1.25 12x1.25mm threads.
  • 3) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 4) Your factory wheel studs are shorter than 1.0" (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 5) Wheel center bore needs to be no smaller than 56.1mm..
  • [SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.0" (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs..
  • [PRODUCT BENEFITS] Allows you to install 5x114.3 (5x4.5") Wheels on your vehicle. Hubcentric design ensures the spacer bore fits perfectly around 56.1mm vehicle hubs and the 56.1mm lip functions as an extension of the hub to preve....
Check Stock

ECCPP 513121 Wheel Bearing Hub Front Wheel Hub and Bearing Assembly Allure, Aurora, Bonnevile, Century, Impala 5 Lug W/ABS

  • WHEEL HUBS PARAMETER - OE 513121,5 lugs,Front Axle,ABS System,Flange Diameter: 5.80 In., Bolt Size: M10x1.25, Flange Offset: 2.007 In..
  • VEHICLE COMPATIBLE - Hub assembly fits for 1997-2001 Chevy Venture 2004-2005 Pontiac Bonneville 1997-2003 Pontiac Grand Prix 2000-2003 Pontiac Bonneville 2003-2005 Pontiac Montana 2002 Pontiac Montana 1999-2001 Pontiac Montana 1997-1998 Pontiac Trans Sport.
  • MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
  • SERVICE WARRANTY - 1 year warranty, support replace, r....
Check Stock

Hengha Golf Cart On Board Computer with Square 6-Pin Plug Fits for Club Car DS/IQ 1998+ Electric 48V 101909902 103697201 AM1229201

  • 1.OEM #102357701 after-sale market#6110..
  • 2.The front wheel hub bearing assembly includes wheel hub , bearing, plastic dust cover and nut. The product has been assembled, so the installation is very simple..
  • 3.The front wheel hub bearing assembly is well manufactured and adopts precision bearings. The products have passed 100% inspection before leaving the factory. The high-quality wheel hub bearing assembly allows you to keep the wheel from shaking, no abnormal sound of the bearing, and the service life of the product is longer..
  • 4.This product is not suitable for DS Club Car before 2003 that with metal dust cover..
  • 5.1 year warranty. We have very strict requirements for the product. If you have any difficulties in installing or replacing any accessories, please feel free to contact us. We will solve your problems for you. Thank you!.
Check Stock

DRIVESTAR 513298 Front Wheel Hub & Bearing Assembly for Nissan Rogue 2008-13/2014-15 Rogue Select/ 2007-12 Sentra 5 Lug w/ABS

  • 【ENSURE FIT】 - Please check clearly the Fitment Menu and the attached NOTE Below the Menu along with the Product Description to make sure this....
  • 【Function & Features】Each parts with protective coating makes it easier to disassemble, High quality wheel hub assembly make you enjoy your....
  • 【FAST & EASY INSTALLATION】 - bolt-on repair solution and requires no special tools during installation.
  • 【QUALITY ASSURANCE】- Use of advanced techniques in the manufacturing of hub assembly and Manufactured and tested to meet O.E. specifications..
  • 【1-YEAR WARRANTY】 - we provide 1 year warranty (One-time Replacement)!please Feel Free to contact us if you need any assistance.
Check Stock