ReviewsWheel Hub Unit Kit

The ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle

  • The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

Car Wheel Nut Caps Auto Hub Screw Cover Car Cap For C4 C5 C2 For Peugeot 207 208 301 307 308 408 508 2008 3008 20 Pcs Per Set

  • The ROP Shop replacemnent Deck Wheel with Bolt & Nut for Simplicity 1316H 1692480 & 1316H 1691680 Tractor.
  • Specs - Wheel Size: 5" x 2 3/4". Hub Offset: 2 1/2". Bore Size: 1/2". Tread Type: Smooth. Material Type: Plastic. Refer to images 2 & 3 for more information.
  • Includes - (1) Deck Wheel, (1) Bolt & (1) Nut.
  • Please be sure to check your part or model number to ensure this is the correct deck wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

The ROP Shop | 40 Inch Shaft Kit for Drift Trike Bikes includes (4) Bearing Flangettes PFT-206

  • The ROP Shop replacement 40 Inch Shaft Kit for Drift Trike Bikes includes (4) Bearing Flangettes PFT-206.
  • Specs - Shaft Size: 40". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 40" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

The ROP Shop | 40 Inch Shaft Kit for Drift Trike Bikes with (3) Key Stocks 6x80, Chain #420

  • The ROP Shop replacement 40 Inch Shaft Kit for Drift Trike Bikes with (3) Key Stocks 6x80, & Chain #420.
  • Specs - Shaft Size: 40". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 40" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

The ROP Shop | 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5

  • The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

Universal 14 inch Car Racing Steering Wheel Neo Chrome Spokes 6 Bolt Classic White Wood Steering Wheel Drifting Deep Dish with Horn Button

  • 350mm Classic White Wood Steering Wheel with Neo Chrome Spokes Fit for Most Car.
  • Racing Steering Wheel required install Hub adapter(Boss kit Hub adapter Boss kit is not including in this listing).
  • 14" 350mm Diameter 45mm Deep Dish Vintage Spec.
  • Car Sports Steering Wheel Frame is Made of High Quality ABS Plastic and Aluminum Neo Spoke. The Horn Button is Retained.
  • Custom Removable Steering Wheel Compatible with most standard 6-Bolt Racing Hub adapter Features.
Check Stock

ABN Wheel Bearing Puller Kit Hub Removal Tool Wheel Bearing Tool - Independent Suspension Roll Ball Bearing FWD RWD AWD

  • [No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and....
  • [Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension and pressed roller-ball bearings.
  • [Use on Seized-Up Assemblies]: Self-centering mechanism and thrust bearing design.
  • Use the round plate that corresponds to the diameter of your....
  • [Perfect Sizes]: Universal set includes 21 pieces that have A through U permanently printed labels.
  • Pusher washer disk driver sizes from 2.1 inches....
  • [Contents]: Wheel hub and bearing puller set and installation kit includes a remover tool, adapter shoes, pusher washers, receiver sleeves, nut-bolt,....
Check Stock

Wheel Accessories Parts Set of 2 Wheel Adapter Spacer 5x4.75 to 5x4.75 Hub Centric 70.30mm Hub Bore 7/16\ Thread 2\ Thick- Fit Buick, Cadillac, Chevrolet

  • Fitment: Fits Buick, Cadillac, Chevy, Oldsmobile, Pontiac with 5x4.75" Vehicle Bolt Pattern, 5x4.75" Wheel Bolt Circle. 70.3 Hub Centric to vehicle hub and 70.3 wheel center bore.
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
  • Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance..
  • Hub Centric Adapter provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This adapter is for a wheel and vehicle hub diameter of 70.3mm only..
  • Specs: Thickness: 2" | Vehicle Bolt Pattern: 5x4.75" | Wheel Lug Pattern: 5x4.75" | ID (Vehicle Hub Size): 70.3mm | OD (Wheel Hub Size): 70.3mm | Stud and Lugs Thread: 7/16"-20 | Color: Black | Quantity: 2.
Check Stock

Wheel Accessories Parts Set of 2 Hub Centric Wheel Spacer/Adapters - Thickness: 1.5\ - 5x5.5 to 5x5.5 - Lug/Stud Thread: 9/16\ - Hub Bore: 77.8mm - 5 Lug (2 Pc, 1.5\

  • Fitment: Fits Chrysler Aspen, Dodge Durango, Dakota, Ram 1500, Mitsubishi Raider with 5x5.5" Vehicle Bolt Pattern, 5x5.5" Wheel Bolt Circle. 71.5 Hub Centric to vehicle hub and 71.5 wheel center bore.
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
  • Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance..
  • Hub Centric Adapter provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This adapter is for a wheel and vehicle hub diameter of 77.8mm only..
  • SPECS: Thickness: 1.5" | Vehicle Bolt Pattern: 5x5.5" | Wheel Lug Pattern: 5x5.5" | ID (Vehicle Hub Size): 77.8mm | OD (Wheel Hub Size): 77.8mm | Stud and Lugs Thread: 9/16"-18 | Color: Black | Quantity: 2.
Check Stock

Wheel Accessories Parts Set of 2 Hub Centric Wheel Spacer/Adapters - Thickness: 2\ - 5x5.5 to 5x5.5 - Lug/Stud Thread: 14x1.5 - Hub Bore: 77.8mm - 5 Lug (2 Pc, 1.75\

  • Fitment: Fits Ram 1500, 1500 Classic with 5x5.5" Vehicle Bolt Pattern, 5x5.5" Wheel Bolt Circle. 71.5 Hub Centric to vehicle hub and 71.5 wheel center bore.
  • Widen your vehicle base and give your vehicle a more aggressive stance while improving handling and stability. Increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
  • Kit Includes 2 Anodized, Precision machined 6061-T6 Aircraft Grade Aluminum adapters with heat treated, hardened Grade 10.9-wheel studs and matching black, dual coated lugs. Anodized surface provides corrosion resistance..
  • Hub Centric Adapter provides a snug fit on the vehicle hub as well as the wheel which reduces vibrations and stress on lug nuts. This adapter is for a wheel and vehicle hub diameter of 77.8mm only..
  • SPECS: Thickness: 2" | Vehicle Bolt Pattern: 5x5.5" | Wheel Lug Pattern: 5x5.5" | ID (Vehicle Hub Size): 77.8mm | OD (Wheel Hub Size): 77.8mm | Stud and Lugs Thread: M14 x 1.5 | Color: Black | Quantity: 2.
Check Stock

TRQ Rear Wheel Bearing & Hub Assembly Pair for Nissan Juke Rouge

  • Direct Fit, OE Replacement Wheel Bearing Assembly Kit.
  • Kit Includes: (1) Rear Passenger Side Wheel Bearing & Hub Assembly.
  • (1) Rear Driver Side Wheel Bearing & Hub Assembly.
  • Vehicle Specific: Check fitment information in the listing for compatibility.
  • Aftermarket Reference Number(s): 0516330,432024BA0B,43202EN100,43202JG200,512373,712373,HA590235.
Check Stock