ReviewsWheel Lock Nut

McGard 24215 Chrome Cone Seat Wheel Locks (M14 X 1.5 Thread Size) - Set of 4

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. Computer generated key designs allow for an inf....
Check Stock

Dometic Baystar Hydraulic Steering Kit, HK4200A-3

  • Gives 5 wheel turns lock-to-lock when using BayStar outboard cylinders.
  • Kit Includes: (1) BayStar helm pump (HH4314-3) (1) BayStar cylinder (HC4645H) (2) Hydraulic steering fluid (HA5430) (1) Filler kit (HA5438).
  • Also includes (1) BayStar tubing kit (HT4420H, 2 x 20' hoses).
  • Dn not use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.
Check Stock

McGard 84844 Black 9/16 - 18 Thread Size Cone Seat Style Wheel Installation Kit for 8-Lug Vehicle

  • Includes 28 Lug Nuts-4 Wheel Locks-1 Key & 1 Key Pouch.
  • Duplex wheel locks and lugs set contains larger key hex, 2.5″ overall length and wider outside diameter of our Duplex Wheel Locks are necessary in some truck & van applications. As a general rule, most 8 lug wheels require Duplex Wheel Locks. Kit includes: Lug Nuts, Wheel Locks, 1 Unique Key and 1 Key Pouch.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that Wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks and lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
Check Stock

Land Rover Range Rover Classic 1987-1995 / Discovery 1 1994-1999 Wheel NUT with Washer Set of 5 Part: RRD500560 / ANR2763MMM

  • LAND ROVER RANGE ROVER CLASSIC 1987-1995 / DISCOVERY 1 1994-1999 WHEEL NUT WITH WASHER SET OF 5.
  • NEW OE UK BRAND PART # RRD500560 / ANR2763MMM.
  • Alloy wheel nut set of 5 with part number RRD500560 fits all alloy wheels on the Land Rover Discovery 1 Conical blind wheel nut - thread 16 x 1,50 - length wheel nut (mm): 52 - length thread (mm): 48 - to fit alloy wheel only - style: chrome - 27 mm socket - Ø shank: 29mm.
  • Land Rover # RRD500560 - Wheel Nut With Washer.
  • Fits: Discovery I | '94 - '99 Range Rover Classic | '87 - '95 Defender 90 | '94 - '97 Defender 110 | '93.
Check Stock

McGard 24548 Black Cone Seat Wheel Locks(1/2\-20 Thread Size) - Set of 5

  • For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that wheel lock sets are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our website. Please review important fitment notes provided. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by ....
Check Stock

DPAccessories LCS3B6HCGBK06LK4 4 Black Spline Drive/Tuner Locking Lug Nuts/Wheel Locks - M12x1.50 - Dual Hex Wheel Lock Set

  • For aftermarket wheels that require a small diameter lug nut for slim lug holes – Will not fit factory OEM wheels.
  • M12x1.50 – Dual Hex (3/4 in. and 13/16 in. ) – Conical 60 Degree Seat Nut – 0.8 in. wide – 1.34 in. tall.
  • Unique external security pattern requiring a matching key for removal.
  • Made from proprietary black coating and hardened steel for protection against rust and corrosion.
  • Kit includes: four (4) black wheel locks one (1) wheel lock key and a key code label for replacement keys.
Check Stock

Softride Quiet Ride Locking Tightening Hitch Pin Anti-Rattle for Receiver Hitches Bike Racks or Boat Trailers Silence the clanking noise that occurs while towing 25219

  • Compatible with hitch receivers, hollow shank ball mounts, and multiple brands of hitch mounted bike racks, including Thule, Yakima, Saris, Kuat,....
  • Eliminate the annoying rattle and vibration when towing by using this versatile anti rattle anti theft accessory, compatible across brands. Anti....
  • Perfect for use with a car, van, truck, RV, tow vehicle, SUV, ATV, bicycle rack, camper, fifth wheel, boat trailers, cargo trailer, gooseneck and....
  • Kit includes: heavy duty solid stainless steel threaded hitch pin, lock washer, nut, rugged nut holder and fit adjuster.
  • Easy installation – hand tighten the pin, THEN attach lock, THEN wrench tighten. Install with hitch classes 1, 2, 3, and 4 (i. ii. Iii. Iv), on 2”....
Check Stock

McGard 65515 Chrome SplineDrive Wheel Installation Kit M14 x1.5 Thread Size - for 5 Lug Wheels

  • Includes 16 Lug Nuts-1 Installation Tool-4 Wheel Locks-1 Key & 1 Key Pouch.
  • SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts.
  • In addition they are 30% lighter in weight. Available in a variety of colors and styles. One is sure to match your wheel style or color. The black, gold or chrome plating on all of our lug nuts are guaranteed for life not to chip, peel or rust...ever! For aluminum wheels only. Box Kits include SplineDrive lug nuts, installation tool, tool storage pouch and chrome sleeve valve stems. Chrome, gold and black kits include 4 wheel locks, wheel lock key tool and I.D. card. Colored cap kits do not include wheel locks.
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Please note that wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our websit....
Check Stock

Spurtar Twist Socket Set Lug Nut Remover - 5 Pieces Impact Stripped Lug Nut Remover Wheel Lock Removal Kit - 17MM,19MM 21MM 22MM

  • Twist Socket Set Sizes: This lug nut removal kit includes 17mm, 19mm, 21mm, 22mm Spurtar Wheel Lock Removal Kit twist sockets and 1/2" Drive Drift....
  • Excellent Torque &Tight Grip: This stripped lug nut removal tool is in plum-shaped internal thread design provides excellent torque.
  • ANTI-SLIP DESIGN: Inside equipped with slip-proof bayonet, Spurtar emergency lug nut remover provides higher friction, not easy to slip and shedding....
  • Ideal Lug Nut Extractor Socket: 1/2-inch square drive fits your wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (not included). Not....
  • HEAVY DUTY: HRC 50-53 hardened alloy steel provides Spurtar twist socket lug nut remover set with maximum strength and durability.
Check Stock

BRITPART Set of 5 Wheel NUT with Washer Compatible with Land Rover Discovery 2 Part # ANR3679

  • COMPATIBLE WITH LAND ROVER DISCOVERY 2 / RANGE ROVER P38 SET OF 5 WHEEL NUT WITH WASHER.
  • Alloy wheel nut with part number ANR3679 fits all alloy wheels on the Land Rover Discovery 2 and Range Rover P38 Land Rover # ANR3679 - Wheel Nut With Washer.
  • Conical blind wheel nut - thread 14 x 1,50 - length wheel nut (mm): 53 - length thread (mm): 49 - for steel rims or alloy rims if fitted with metallic adaptor inserts - style: chrome - 27 mm socket.
  • Fits: Discovery Series II | '99 - '04 Range Rover 4.0 (P38) | '95 - '02 Range Rover 4.6 (P38) | '95 - '02.
Check Stock

AEV JK Wrangler Spare Tire Jack Base Booster

  • AEV’s Jack Base provides 3-1/2 inches of additional lift height to the stock Wrangler’s “scissor” jack.
  • The large 7.5″ x 10.5″ base gives the jack better stability in off-road and soft soil conditions.
  • Handy compartments in the base store your AEV lug nut extension and the OE wheel lock key..
  • The Jack Base is shaped to fit neatly into the JK’s rear floor compartment.
  • Doubles as a wheel chock to prevent a disabled vehicle or trailer from rolling..
Check Stock