ReviewsWheel Locking Bolts

WIOSEIOC Bike Training Wheels,Thicken Stronger Flash Mute Wheel Adjustable Stabilizer Suitable for 12/14/ 16/18/ 20/ inch Single Speed Bike, Including Mounted Kit

  • ... more stable and helps young students to ride bicycles until they have a sense of balance available on the bike, so you don't have to worry about your children safety ..
  • 【EASY TO INSTALL】, we offer complete installation tools, (2 x Shoulder Bolts, 2 x Washers, 2 x Locking Nuts, 2 x Limit Spacer, 1 x Wrench) you have more options to adjust the height, so it's easy for you to install the training wheel on your bike quickly..
  • 【SATISFACTORY AFTER-SALES SERVICE】2 years free return and change, we will provide you with high quality for training wheels, we are committed to customer service and maintain 100% customer satisfaction guarantee. If you have any questions, feel free to contact us, we will reply you within 12 hours..
Check Stock

Valor Fitness CA-2 Adjustable 1” Boxing Speed Bag Platform with Wheel Crank for Easy Adjustment, Speed Bag Included

  • HIGH QUALITY- 2” x 2” frame with 1” 12-gauge Steel tubes hold the platform and frame together for maximum stability. Mounting brackets allow the user to mount the platform onto a wall. Cement anchors and wood lag bolts are provided..
  • FAST RETURN- Made with 1” thick MDF and reinforced with 2 solid steel chrome tubes to allow striking energy to be transferred back into speed bag. 360-degree rotating swivel allows the added speed and efficiency required in the boxing arena..
  • ADJUSTABLE WORM DRIVE AND WHEEL CRANK- Easy to adjust worm drive accommodates all athletes by allowing each user to choose their desired height using wheel crank. Allows for a 13” adjustable range of motion..
  • ADDED STABILITY- 4 locking screw nuts on back of frame prevent shaking. Simply turn the locks to loosen and move platform to desired level with the wheel crank below the unit and retighten. Unit will easily slide on chrome-plated tubes..
  • ADDITIONAL- Includes pump. Valor Fitness Speed Bags are built to fit our products. If using another bag, the CA-2 should accommodate most S/M speed bags. Partially assembled for your convenience..
Check Stock

BS-TOP Bicycle Training Wheels, Thicken Stronger Version Heavy Duty Rear Wheel Adjustable Kids Stabilizer Suitable for 12/14/ 16/18/ 20/ inch Children's Single Speed Bike, Including Mounted Kit

  • ...er, training wheel added a small bracket that it's more stable and helps young students to ride bicycles until they have a sense of balance available on the bike, so you don't have to worry about your children safety..
  • 【EASY TO INSTALL】, we offer complete installation tools, (2 x Shoulder Bolts, 2 x Washers, 2 x Locking Nuts, 2 x Limit Spacer, 1 x Wrench) you have more options to adjust the height, so it's easy for you to install the training wheel on your bike quickly..
  • 【SATISFACTORY AFTER-SALES SERVICE】2 years free return and change, we will provide you with high quality for training wheels, we are committed to customer service and maintain 100% customer satisfaction guarantee. If you have any questions, feel free to contact us, we will reply you within 12 hours..
Check Stock

2pcs 5mm Hubcentric 4x114.3 Wheel Spacers (66.1mm bore) Compatible with Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra Cube (4x4.5)

  • StanceMagic Hubcentric Wheel Spacers - Fits vehicles with 4/114.3 (4/4.5") bolt pattern and 66.1mm Centerbore. Compatible with Nissan 84-88 200SX, 88-94 240SX, 95-98 240SX Base Model, 240Z (Rear Hub), 260Z (Rear Hub), 280Z (Rear Hub), 280ZX (Rear Hub), 84-86 300ZX. Compatible with Nissan 93-01 Altima, 09-11 Cube, 85-88 Maxima, 00-10 Sentra. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Center Bore: 66.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing....
Check Stock

American Security Products U.L Listed 1 Hr Fire Combo Safe (OD 19 1/8x13 1/2x15 11/16, 126-Pounds)

  • 3-way boltwork with 5 active 1-1/4" diameter chrome-plated steel locking bolts. 4 pre-cut anchor holes with mounting hardware.
  • Massive 1-1/8" recessed door contructed of a 1/4" solid steel plate and a fire insulating material. 3-wheel combination lock protected by a drill-resistant hard plate..
  • All-velour interior including back-cover and firewalls. Deep blue textured finish with bold, elegant American Security logo.
Check Stock

foriy Boat Launching Wheels, Inflatable Boat Removable Transom Launch Wheels, Boat Lift Wheel Kit, 176LBS Loading Capacity Boat Launch Wheels 10" with Stainless Steel Stand for Inflatable Boats Kayaks

  • ...assembly And Assembly: The wheels and brackets of the stern wheel are already installed when leaving the factory, just fix the bracket to the stern plate. When installing, you need an electric drill and a drill bit. First drill eight holes on the stern plate, and then align the brackets. Secure with screws and self-locking nuts. Note: The screws of the fixed transom and bracket need to be equipped with matching 304 stainless steel gasket to prevent spinning..
  • Size of Each Part: The wheel adopts solid wheel, needn't to worry about explosions and distortions, and can provide better support on soft terrain and sand. The diameter of the wheel is about 9.84inch, the width of the cross section is about 3.15-3.35inch, and the standard screw is 15.74inch long..
  • Easy To Use: The stern wheel is installed on both sides of the rear stern of the inflatable boat. The stern wheel can be lowered freely and stowed, which is convenient for towing the boat and easy to carry.The tires allow for streamlined movement over a variety of terrain lawn, gravel, sand and wooded areas..
  • Maintenance Method: The inflatable boat launch wheel is washe....
Check Stock

StanceMagic - 5mm Hubcentric 5x114.3 Wheel Spacers (67.1mm Bore) Compatible with Hyundai Genesis Tiburon Veloster, Kia Optima, Mazda 3 5 6 MX-5 Miata RX-8 Protege Mitsubishi Jeep (2 Pack)

  • StanceMagic Flat Hubcentric Wheel Spacers for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 67.1mm Centerbore. Compatible with Mazda 3, 5, 6, CX-3, CX-5, MX-5 Miata, RX-8. Compatible with Hyundai Genesis, Tiburon, Veloster. Compatible with Genesis G70, G80, G90, GV70, GV80. Compatible with Mitsubishi. Compatible with Kia Optima, Stinger. Also compatible with Jeep Compass, Patriot. Check Year/Make/Model in Description. May fit others, verify using spacer specs..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 67.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIA....
Check Stock

5mm Hubcentric 5x4.75 Wheel Spacers (70.5mm Bore) Compatible with Buick Cadillac XLR Chevrolet Blazer Corvette Camaro GMC S15 Pontiac GTO Tans Am Phoenix Trans Sport 5x120 5x120.65 2pcs

  • StanceMagic Hubcentric Wheel Spacers for vehicles with 5/120.65 (5/120.7 or 5/4.75") Bolt Pattern and 70.5mm Centerbore. Compatible with Chevrolet 1987-2005 Blazer, 1982-2003 Camaro (Rear Hub), 1984-2020 Corvette, 1982-2004 S10 (Rear Hub). Compatible with GMC 1982-1991 S15, 1991-2005 Jimmy, 1990-2004 Sonoma (Rear Hub). Compatible with Pontiac 1984-1997 Trans Am, 1990-1997 Trans Sport. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x120.65 (5x120.7 or 5x4.75") | Hub Center Bore: 70.5mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardwa....
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

Workhorse Foldable Highlift Automotive Engine Creeper

  • Heavy Duty: The mechanic topside creeper is made with steel & steel tube frame which provide strength and rigidity for years of use and reliability. High strength 4.8 grade metric bolts and lock nuts for support. Solid locking nylon casters for smooth rolling on floor and positioning of creeper around the vehicle..
  • SAFETY : The top side creeper features premium anti-slip grips on each step. Padded posts add protection against scratches for the truck or vehicle being serviced. Spring loaded lock pins lock steps in place. Locking casters keep mechanic and creeper from accidentally moving..
  • EASY TO USE : The underhood creeper is easy for one man to assemble and operate. 2" thick top deck cushion provides comfort for hours and is easy to clean. Ladder is light and easy to adjust up or down. Heavy Duty casters make positioning the creeper around the wheel and front end easy. Folds and stores up right or laying down when not in use..
  • Use: Top side creeper for trucks is perfect for use at home, in a mechanic shop, or in a commercial bay. This professional high lift creeper is perfect for light duty trucks, Jeeps, lifted trucks, and commercial vehicles and for fleet maintenance..
  • DIMENSIONS : IN USE - Low Height 47.5" | High Height 66.75" | Width 32" | Length 54....
Check Stock

Jessie & James | Concealed Crossbody Gunbag RFID Blocking Locking Firearm Removable holster | BK

  • NEW and IMPROVED Free Door Organizer Included, Upgraded to 1 Hour Fireproof,.
  • Larger 1.5″ Locking Bolts, Automatic LED Interior Lighting Included -60 Minute Fire Rated @ 1875 Degrees Maximum 16 Long Gun Capacity/Average Capacity 8 to 10 Long Guns - 12 gauge solid steel Body with 12 gauge composite style door to help prevent pry attacks.--Gear drive locking system to resist prying attacks, punch attacks and drill attacks(not cheap cam drive)- EMP Proof Electronic Lock with High Security Bypass Key Lock (1 Key Included).
  • 1/4 inch steel reinforced bolt down hole for extra mounting security-(10) 1” diameter solid steel locking bolts--Outside Dimensions: Height: 59" Width: 22" Depth: 16"- 8X More Hardplate than typical safes- 1" Solid Steel Locking Bolts.
  • PLEASE READ BEFORE PURCHASING: Undeliverable to New York with zip codes beginning in (100-104) & (110-119), some remote areas such as islands, areas accessible only by toll bridge or ferry service, union states, etc. Please contact us to verify. THIS PRODUCT IS SHIPPED BY TRACTOR TRAILER. Please read over shipping details to prevent delivery iss....
Check Stock