ReviewsWheel Scale

Dynabrade 52705 Right Angle Depressed Center Wheel Grinder, 3-Inch 76mm Diameter

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
3" Diameter, Right Angle, .4 hp, Rear Exhaust, 15,000 RPM.
Accepts optional 3" diameter Type 27 Reinforced Depressed Center Wheel, with 3/8" center hole (wheel width of 1/8" to 1/4").

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
4-Inch Diameter, Right Angle, 1 hp, Rear Exhaust, 12,000 RPM.
Accepts optional 4-Inch diameter Type 27 Depressed Center Wheel, with 5/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
Package dimensions:10.25"L x 16.5"W x 3.0"H.

Hardcore 6WD Climbing Crawler: The Cheyenne equipped with tough 6x6 all-wheel drive system, compared to most 4WD vehicles on the market, 6 wheel drive....
Suitable for Outdoor and Indoor: The RTR RC rock Crawler is perfect for outdoor or indoor RC adventure. 1:18 scale, dark gray matte paint body, car....
Scale Detail: Rhino bumper kit, anti rollover bars, and a scale bonnet ventilation grille and snorkel reflect the model's pursuit of detail.....
Both Power and Vibration Damping：High torque over-sized 55T brushed motor and transmission with 104:1 FDL provide powerful power, 6 tuned coil....
Long Lasting Handling Experience: The vehicle is equipped with Water resistant electronics with 2.4GHz radio, 7.4V 2S Lipo battery providing up to 30....

Kit includes: 2 Steel 5 Ton (each) Wheel Alignment Turntable Plates w/ 2 drive on passing transition rubber bridges and rubber thrust blocks.
Turntables have Gold pointer with scale. Plates are 13-3/4" diameter x 2" Tall, Platform is 15-3/5", weight is 34lbs.
Plates adjust 0-50 degrees left and right, Indicator Pin with scale to 60 degrees.
2.55" (65mm) Slide movement, Full-floating ball bearing design for full 360 degree wheel movement.
Heavy Duty Commercial Version Tool. Locking pins hold the turntable securely in place while you position the car on the turntables..

The only officially-licensed scale replica of the one-of-a-kind DRACO by Mike Patey.
Extra Scale details including an abundance of molded-in surface features, steps, antennas, wingtip skids, and much more.
Functional Extra Scale features including licensed KING shocks on the main gear and tail wheel, leading-edge slats, slotted flaps, and more.
17 total LEDs including navigation, landing, down, tail beacon, reversing and other lights with adjustable light controller.
Spektrum AR637TA receiver with full-range telemetry and industry-leading DSMX technology.

【Professional porcelain/glass cutting machine】: Professional manual tile and glass cutting machine, easy and convenient to operate, no electricity, no dust, no noise, easy to do the cutting of floor tiles, tiles and glass even indoors..
【Sturdy structure】: Thickened and thickened knife bar with six sides, not easy to deformation, with steel scale (starting scale: 8 cm), computer laser engraved scale, minimum accuracy of 1 mm, clearly visible, accurate and error-free, scale is not easy to blur..
【 Automatic oiling system】: Automatic oiling when in use, stop oiling when not in use. (Be sure to fill the oil pot with kerosene before use, so as not to damage the cutter head with the glass).
【High-quality durable cutter wheel】: Support 3-12 mm thickness of glass, tile cutting, the maximum cutting width of 120 cm / 47.24 inches (strictly prohibited to hit the cutter wheel).
【Nylon pulley】: Extra-long T-type glass knife knife seat with 20 nylon pulley, fully enclosed precision bearings, rust-proof, cutting process does not jump, smooth sliding, nylon pulley, durable, the use of ordinary ABS material pulley 3 times..

【The Latest Gesture Sensing RC Car 】Two ways to Control: Gesture Controller + Remote controller . 1/16 Scale RC Car + Drift Skills , The latest....
【Main Functions for RC Jeep】Professional drift wheel. forward, backward, left, right and 360° rotation. Easily operate side shifts single wheel....
【4WD & Independent Suspension】The remote control car has a working spring suspension system, 4 wheel drive, can easily adapt to a variety of....
【High Quality Re-charger Battery】 The remote control car is equipped with 2x 3.7V /500 mAh(1000mAH) rechargeable batteries, each battery can be....
【Perfect Gift and 100% Satisfaction Guarantee】2-Year Warranty ! SparkMaster is a company specializing in toy cars, integrating production,....

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
4-1/2-Inch- 5-Inch Diameter, Vertical, 12 hp, Side Exhaust, 12,000 RPM.
Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (wheel width of 1/8-Inch to 1/4-Inch).
Package dimensions:10.25"L x 8.25"W x 6.75"H.

The only officially-licensed scale replica of the one-of-a-kind DRACO by Mike Patey.
Extra Scale details including an abundance of molded-in surface features, steps, antennas, wingtip skids, and much more.
Functional Extra Scale features including licensed KING shocks on the main gear and tail wheel, leading-edge slats, slotted flaps, and more.
17 total LEDs including navigation, landing, down, tail beacon, reversing and other lights with adjustable light controller.
Spektrum AR637TA receiver with full-range telemetry and industry-leading DSMX technology.

Realistic, high-quality, sturdy materials - 8:10 scale replica of the wheel of the 599XX EVO, officially licensed by Ferrari.
Hand-stitched wrapping crafted of the same Alcantara as that used on Ferrari wheels - imported from Italy (for an authentic feel).
The wheel's structure is identical to automotive standards, featuring polyurethane molding (for a more flexible touch and enhanced comfort) and an internal hoop made of steel (for improved transmission of driving sensations and of Force Feedback effects).
Large size: 11.8"/30 cm in diameter (for greater immersion in games).
2 mm-thick brushed metal central steering plate.
Weighs less than 2.6 lbs/1.2 kg (inertia and super-responsive Force Feedback).
2 large wheel-mounted sequential paddle shifters move with the wheel.
New ergonomic design (for optimized positioning of fingers).
Crafted of 0.08"/2 mm-thick brushed metal plus metallic paint.
High-end tact switch (lifecycle exceeding 10,000,000 uses).
Detachable wheel featuring the Thrustmaster Quick Release system - Quickly and easily switch from one wheel to another (Ferrari 599XX Evo Wheel/TM Leather 28 GT Wheel/GT Wheel/PS Wheel/Ferrari F1 Wheel/Ferrari 458 Challenge Wheel/Ferrari 458 Italia Wheel).

Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
4-1/2-Inch- 5-Inch Diameter, Pistol Grip, 7 hp, Rear Exhaust, 11,000 RPM.
Accepts optional Type 27 Depressed Center Wheel in diameters of 4-1/2-Inch and 5-Inch, with 7/8-Inch center hole (Wheel width of 1/8-Inch to 1/4-Inch).
Package dimensions:10.0"L x 8.25"W x 6.75"H.