ReviewsWheel Spacer Hub Rings

Circuit Performance 72.56mm OD to 64.1mm ID Silver Aluminum Hub Centric Rings

【Performance Hub Centric Rings】Eliminate vibrations caused by the wheel not centering correctly onto your vehicle's hub..
【Spigot Hubrings】Made to fill the gap between the wheel and the vehicles hub, center the wheel and hub and correct the dimensions..
【Alloy Hub Rings】Made of High Quality Aluminum, increasing resistance to heat and impact. Not melting in even the most extreme driving conditions..
【OD: 108mm】106 is the diameter of the center bore on the wheel you are using and is the outside diameter of the hub ring..
【ID: 77.8mm】77.8 is the diameter of the hub on your vehicle and is the inside diameter of the hub ring..

Check Stock

StanceMagic 38mm (1.5 inch) Hubcentric 4x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra - Pack of 2

StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 4/114.3 (4/4.5") Bolt Pattern and 66.1mm Centerbore. Compatible with Nissan 88-93 200SX (1.8 Turbo), 89-98 240SX (Base Model), 70-85 240Z (Rear Hub), 70-85 260Z (Rear Hub), 70-85 280Z (Rear Hub). Also compatible with Nissan 93-01 Altima, 90-95 Axxess, 09-14 Cube, 84-88 Maxima, 83-86 Sentra, 00-12 Sentra (2.0i). Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.25 12x1.25mm threads.
2) You have 1.5" (38mm) of space between your fender and your wheel/tire.
3) Your factory wheel studs are shorter than 1.5" (38mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
4) Wheel center bore needs to be no smaller than 66.1mm..
[SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.5" (38mm) Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Bore: 66.1mm | Lip Diameter: 66.1mm | Stud/Nut Thread Pitch: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat tr....

Check Stock

99-09 Volkswagen Golf / Jetta NRG Steering Wheel Short Hub Adapter Black

100% authentic NRG products Designed for those who prefer the steering wheel is further from their bodies..
NOTE: Not recommended for use with the thin version quick release.
Vehicle Application: 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Volkswagen Golf / Jetta.
REMARK: 1. If the hub is too short, you would need to add the steering wheel hub spacer (sold separately) 2. We cannot guarantee the horn can be reused in some of the aftermarket steering wheel setup.Since the installation of steering wheel / hub adapter requires removal or inactive of the ABS system, the hub adapter is for off-road / racing use only. No warranty is implied. Please read the following disclaimer carefully before buying the item..
Hub Adapter Disclaimer: For cars without airbag: Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels. Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to a steering wheel failure which can cause an accident resulting in serious personal injury or death..

Check Stock

Hubcentric Wheel Spacer Set of 4-5 Lug 1 inch Thick 25mm Hub Centric 5x114.3mm - Compatible with Nissan and Infiniti Vehicles - 350Z, 370Z. Altima, Maxima, Pathfinder, Rogue, Sentra, G35, JX35, FX35

Hubcentric Wheel Spacer Kit 4 5X4.5" 1 Inch Thick - Allows extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for larger tire installation to the vehicle. Wheel spacers also increase vehicle's performance in terms of handling and traction. The further the wheel is from the hub assembly, the better its grip..
Compatible With Nissan & Infiniti Vehicles - 2003 - 2012 FX35 | 2003 - 2008 G35 | 2008 - 2013 G37 | 2014 - 2019 QX50, QX60, QX70 | 2003 - 2009 350Z | 2009 - 2018 370Z | 2002 - 2018 Altima | 2000 - 2018 Maxima | 2013 - 2018 Pathfinder | 2001 - 2017 Quest | 2013 - 2018 Sentra | & more. See below for the full vehicle list..
Complete Kit - This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers extend the wheels outward the vehicle giving it a more agressive look, which also allows for large brake caliper installations or lift/lowering kits.
OEM Fit, Quality, Finish - CNC machined black colored anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and heat treated lug nuts, you can rest assured you are getting the highest quality of wheel spacers that is tough, stable and safe..

Check Stock

ECCPP 1.25

HUB CENTRIC SPACERS 6 LUG FITMENTfits for.
6 LUG SPACERS PARAMETERBrand New Wheel Spacers. Thickness:1.25", Bolt Pattern:6x5.5", Center Bore:78.1mm, Thread Pinch:14x1.5.
6X5.5 WHEEL SPACERS HUB CENTRIC ADVANTAGEDesigned to move the wheels further out from the hub, giving your vehicle a more aggressive stance and allows for better handling characteristics. They also increase tire clearance, fix brake caliper clearance issues, allow installation of lift/lowering kits and wider, larger, or high traction tires..
SPACERS 6X5.5 TO 6X5.5 SAFETYMade from the best true T 6 billet aluminum, with heat treated and hardened 10.9 grade bolts pre-installed. The anodized surface provides additional resistance to corrosion. Exceptionally sturdy and lightweight compared to steel spacer..
WHEEL SPACERS HUBCENTRIC 6X5.5 SERVICE Contact our friendly, helpful, and knowledgeable customer service representatives if you have any questions, we will be glad to address any questions or concerns promptly..

Check Stock

Wheel Accessories Parts Set of 2 Wheel Adapters Spacers 8x170 to 8x170 Hub Centric 124.9mm Center Bore/Hub Bore M14x2.0 Thread 2 Inch Thick Wheel Adapters Billet Aluminum

Prior or purchasing please check fit by inputting your vehicle information in the Amazon Confirmed Fit. **PLEASE NOTE IF BOLT PATTERN AND CENTER BORE MATCH DOUBLE CHECK THREAD PITCH ON YOUR VEHICLE**.
Fitment: Trucks with 8x170mm Bolt Pattern / Bolt Circle. 124.90mm Hub Centric to vehicle hub and 124.90mm wheel center bore..
Specs: T6061 Billet Aluminum Wheel Adapter / Spacer - 2.00" Thickness. M14x2.0 Lug Nuts included with matching stud threads on adapter M14x2.0. Hub Centric Fitment insures perfect balance.124.90mm ID/OD Hub Centric Fit.
Finish: Premium anodized adapter / spacer finish with matching black studs and dual coated black finish lugs..
Construction: Built from the highest-grade aircraft quality T6061 Billet Aluminum..

Check Stock

Wheel Spacer Set of 4-6 Lug 1 inch Thick 25mm Lug Centric Hub Adapter 6x5.5 - Compatible with Toyota Vehicles - 1996-2018 4Runner 01-07 Sequoia 2001-18 Tacoma Tundra FJ Cruiser - 6x139.7mm

Wheel Spacer Kit of 4 6X5.5" 1 Inch - Allows extra clearance between the wheel and the wheel hub assembly increasing the offset which allows for....
Compatible With Toyota Vehicles - 1996 - 2018 4Runner | 2007 - 2014 FJ Cruiser | 2001 - 2007 Sequoia | 2001 - 2018 Tacoma | 2000 - 2006 Tundra |. The....
Complete Kit - This is a complete kit from AA Ignition that includes all the necessary bolts and lug nuts for a complete installation. Wheel spacers....
OEM Fit, Quality, Finish - CNC machined black colored anodized wheel spacer provides additional resistance to corrosion and with 10.9 grade studs and....
Lifetime Warranty - This 1inch wheel spacer kit manufactued by AA Ignition comes complete with a lifetime warranty. If the part ever break or fail on....

Check Stock

5mm Hubcentric 5x4.75 Wheel Spacers (70.5mm Bore) Compatible with Buick Cadillac XLR Chevrolet Blazer Corvette Camaro GMC S15 Pontiac GTO Tans Am Phoenix Trans Sport 5x120 5x120.65 2pcs

StanceMagic Hubcentric Wheel Spacers for vehicles with 5/120.65 (5/120.7 or 5/4.75") Bolt Pattern and 70.5mm Centerbore. Compatible with Chevrolet 1987-2005 Blazer, 1982-2003 Camaro (Rear Hub), 1984-2020 Corvette, 1982-2004 S10 (Rear Hub). Compatible with GMC 1982-1991 S15, 1991-2005 Jimmy, 1990-2004 Sonoma (Rear Hub). Compatible with Pontiac 1984-1997 Trans Am, 1990-1997 Trans Sport. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
[SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x120.65 (5x120.7 or 5x4.75") | Hub Center Bore: 70.5mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardwa....

Check Stock

Vipcar 4 Pack 1.5 in Hub Centric Wheel Spacer 14x1.5 Bolts-on, 6x135 to 6x135mm Bolt Pattern, 87.1mm Hub Bore, for Ford 2015-2022 F150 2.7L-5.0L, 2015-2022 Expedition 3.5L, Lobo 3.5/5.0L, Navigator

【Specification】Type: Hub Centric Bolt-on Spacers, Thickness & Sets: 1.5 Inch(38mm) x 4 Pcs, Wheel & Vehicle Bolt Pattern: 6x135 to 6x135mm, Stud size: 14x1.5, Center Bore: 87.1 mm with lip. Bolt Grade: 10.9, Spacer Material: 6061-T6 High-strength Aluminum Billet, Finish: Hard-Anodized Black..
【Application】1.5 Inch Hubcentric wheel spacer compatilbe 6 lugs 87.1mm hub bore for Ford 2015-2022 F-150 2.7/3.0/3.3/3.5/5.0L, 2015-2022 Expedition 3.5L, 2015-2022 Lobo 3.5/5.0L, for Lincoln 2015-2022 Navigator 3.5L. May fit other vehicles, kindly verify using spacer specs..
【Benefit】Wheel spacer help stop wheels and tires from rubbing against the liners, brakes, or other suspension parts, by creating additional space between tires and hubs also being a great solution for complex and costly staggered/negative offset wheel setup, making your vehicle more aggressive, tougher, and stable, allowing lift/lowering kits, larger calipers, or traction tires installation..
【Installation】It’s pretty easy to install if you're a skilled mechanic and you got the correct spacers, however, we do not wanna stress too much....

Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 2pcs

StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5×100 bolt pattern AND wheels must be 5×114.3 or 5×4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
2) Wheel studs are M12x1.25 12×1.25mm threads.
3) You have 1.0″ (25mm) of space between your fender and your wheel/tire.
4) Your factory wheel studs are shorter than 1.0″ (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
5) Wheel center bore needs to be no smaller than 56.1mm..
[SPECIFICATIONS] Two (2) Wheel Adapter Spacers | Thickness: 1.0″ (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5×114.3 (5×4.5″) | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12×1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent....

Check Stock

StanceMagic - 1 inch (25mm) Hubcentric Wheel Adapters Spacers with Lip Converts 5x100 to 5x114.3 (Changes Bolt Pattern), 56.1mm Bore, 12x1.25 Studs, Compatible with Scion FR-S FRS and Many Subaru 4pcs

StanceMagic Hubcentric Wheel Adapter Spacers with Lip. CHANGES BOLT PATTERN. Vehicle must be 5x100 bolt pattern AND wheels must be 5x114.3 or 5x4.5 bolt pattern. Compatible with 2012-2016 Scion FR-S FRS, 2016-2021 Toyota 86. Compatible with Subaru 2012-2021 BRZ, 2002-2007 Baja, 1997-2018 Forester, 1992-2003 Impreza, 2004-2021 Impreza (non STI), 1989-2014 Legacy, 2000-2013 Outback, 2004-2006 Saab 9-2X. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Vehicle Hub is 56.1mm.
2) Wheel studs are M12x1.25 12x1.25mm threads.
3) You have 1.0" (25mm) of space between your fender and your wheel/tire.
4) Your factory wheel studs are shorter than 1.0" (25mm) (If your wheel studs are too long, you may need to grind/trim the stud down to fit).
5) Wheel center bore needs to be no smaller than 56.1mm..
[SPECIFICATIONS] Four (4) Wheel Adapter Spacers | Thickness: 1.0" (25mm) Wide | Vehicle Bolt Pattern: 5/100 | Wheel Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 56.1mm | Stud/Nut Thread Size: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corro....

Check Stock