ReviewsWhite Ceiling Vent Cover

Vent Filter, Air Vent Filters, MERV 8 Electrostatic Triple Filtration Floor Vent filters - 4"x10", 90 day filtration. (12)

  • ... They also prevent debris from falling into the ducts and guards against creepy crawlees travelling into your house from your air ducts..
  • ►Reduce the amount of air duct cleaning every year using these for any air duct vent filter and house air vent filter needs such as a ceiling vent filter, register vent filter, air duct filter, heating vent filter, ac vent filter, floor vent filter, and more..
  • ►To install remove the vent deflector and any air vent cover. Grab the vent register from the floor and pull up. Flip the vent register over and insert the filter between the grates and the vent. Reinstall the floor vent register with air filter and replace the air deflector..
  • ►MADE FROM 100% NON-WOVEN POLYESTER: VERY LITTLE TO ZERO REDUCTION IN AIR FLOW! This series of filter is engineered from 100% non-woven blue and white polyester. Two distinctly different plies of media are utilized, each being more dense than the one preceding it. The progressively dense fiber orientation of each media layer enables the small micron size particles to depth load within the filter. Followed by a Non-toxic Adhesive Stage on the MERV 8 ....
Check Stock

Venti Air 25 X 25 Steel Return Air Filter Grille - Removable Face/Door for 1 inch Filters - HVAC Duct Cover Grill 2-3 Business Day Delivery [Outer Dimension 27.5 W X 27.5 H]

  • Air Flow Decor 30" x 8" Return Air Grille Sidewall & Ceiling, HVAC Vent Cover, White, Outside Dimensions: 31.75" x 9.75".
  • Measure the wall/ceiling open to determine which size grille you should be ordering..
  • All grilles comes with 1/4" phillips head white head screws.
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment.
  • Heavy Duty steel with durable white powder coating..
Check Stock

Magnetic Vent Cover 5.5 X 12.2 3 Pack Merya Strong Magnet Cover Compatible with All Matierials for Ceiling/Wall/Floor Air Register

  • Stronger Magnet: with 1.2mm thickened stronger magnet while general cover is 0.6mm, the magentic air vent cover sticks to your floor/ceiling/wall....
  • Compatible: traceless magnetic strips are offered to make the vent cover compatible with all material registers.
  • Save Electricity: powerful magnet cover adheres closely to grille register to block air leakage.
  • make home more comfortable by redirecting airflow.
  • Standard Size: 5.5x12.2 inch perfect for standard vent registers.
  • easily trim to any size and shape you need.
  • What You Get: 3 pcs magentic vent covers(5.5x12.2inch) with traceless adhesive magnetic strips.
  • 24hr friendly customer service and 100% unconditional....
Check Stock

2 Pack Ceiling Register FanGoFast 3-Way ABS Sidewall Ceiling Air Vent Inlet Cover w/Manual Adjuster for Home Office Bathroom Toilet 10x6P

  • Product Size:Air vent deflector features a grille opening which measures 10 x 6 inches (WxL), and an outer dimension of 12 inch x 8 inches (WxL).
  • ABS Plastic: vent cover is made of high quality ABS plastic material, lightweight, no rusting, healthy material.
  • 3-Way Design:The ceiling register is three-way design, air can come out in three different directions.
  • With manual adjustment button, push the button....
  • Wide Application: Ceiling / sidewall mounting is allowed to connect your HVAC, air ventilation system. Ideal as an inlet vent cover to exhaust bad....
  • Pack Listing: Included 10" x 6" grille cover X 2, screw X 4.
  • Please confirm the required size before purchasing,If there is any problem with the....
Check Stock

12'' X 12'' HG POWER Aluminum Grilles Vents, Air Grilles Duct Cover Vents with 6 Inch Ducting Diameter for Indoor Ceiling Use

  • 12” x 12” Size aluminum alloy premium quality material air ventilation cover. Duct diameter with 150 mm / 6 inch.
  • Special square design of the air grilles duct cover vent, durable, beautiful and environment.
  • Lightweight product and easy to install for ceiling use..
  • No scuff powder-coat durable finish, smooth, shiny, scratch-resistant and waterproof..
  • This Air vent cover suits for ceiling use. especially in places where people work and live. such as meeting room, office ,hotel, public places, hospital gym and etc..
Check Stock

14' Universal RV Trailer Camper Motorhome RV Vent Covers for roof - Vent Lid Replacement (White 2 Pack) Compatible With rv accessories Ventline, Jensen and Elixir RV Vent Covers

  • The New Replacement Weather Resistant 14x14 RV Roof Vent Cover is compatible with most popular camper vents. Compatible with Ventline roof vents prior to 2008 and Elixir roof vents starting 1994. Make sure you look at the images in the listing to make sure your RV vent is compatible with this replacement..
  • Our Highly Durable rv vent covers for roof 14x14 Replace your RV vent covers that are cracked stained and brittle with these high quality impact resistant plastic brand new ones.
  • Easy to Install No Special Tools No Drilling Required to install these 14x14 camper vent cover.
  • This trailer vent cover rv vent covers for roof is meant to fit 14"x 14" RV roof ceiling attic dome exhausts vent and comes completely assembled, which is easy to install..
  • We understand that it quite inconvenient to getting on your camper roof. But replacing a damaged one is necessary. Our 14 inch RV roof vent cover replacement will keep your RV bathroom vent air fresh, insulated rain leaking, and prevent heat entering inside RV. It fits Camper, Motorhome, Trailer..
Check Stock

12 x 12 Extra Magnetic Floor Vent Covers Stronger Magnet for Floor Air Registers for RV Home HVAC AC and Furnace Vents Not for Ceiling Vents 1 Pack 12x12 White

  • Stronger Magnet: with 1.2mm thickened stronger magnet while general cover is 0.6mm, the magentic air vent cover sticks to your floor/ceiling/wall....
  • Compatible: traceless magnetic strips are offered to make the vent cover compatible with all material registers.
  • Save Electricity: powerful magnet cover adheres closely to grille register to block air leakage.
  • make home more comfortable by redirecting airflow.
  • Large Size: 7.8x15.7 inch big size perfect for various vent covers.
  • easily trim to any size and shape you need.
  • What You Get: 3 pcs magentic vent covers (7.8x15.7 inch) with traceless adhesive magnetic strips.
  • 24hr friendly customer service and 100%....
Check Stock

Winflo 30 In. Convertible Stainless Steel Wall Mount Range Hood with Aluminum Mesh Filters and Push Button Control

  • Powerful suction operation at 284 CFM at high speed setting.
  • 3-Speed fan levels for the right amount of suction.
  • Easy to operate push button control for power, fan speed and light.
  • Easy removable dishwasher safe aluminum mesh filters.
  • 2 Bright energy saving soft white LED lights to illuminate your cooking area.
  • quiet operation keeps noise level less than 65db at high speed.
  • Adjustable and telescoping chimney can fit 7.5 Ft. - 8.5 Ft. ceiling, chimney extension for high ceiling is also available for purchase (part# WRHCE03).
  • Installation and mounting hardware, flexible duct work, damper and plug are all included for easy installation.
  • Vent location is on the top, connected to flexible duct work, can vent through ceiling or wall for vent out (ducted) installation.
  • convertible design, can be ducted and non-ducted (with charcoal filters WRHF005S2, sold separately).
Check Stock

Winflo 30 In. Convertible Stainless Steel Wall Mount Range Hood with Aluminum Mesh Filters and Touch Sensor Control

  • Premium motor to provide powerful suction operating at 475 CFM air flow (high speed setting).
  • 3-Speed fan levels with delay shut off for the right amount of suction.
  • Easy to operate and clean touch sensor control panel with time display.
  • Easy removable dishwasher safe aluminum mesh filters.
  • 2 Bright energy saving soft white LED lights to illuminate your cooking area.
  • quiet operation keeps noise level less than 65db at high speed.
  • Adjustable and telescoping chimney can fit 7.5 Ft. - 8.5 Ft. ceiling, chimney extension for high ceiling is also available for purchase (part# WRHCE03).
  • Installation and mounting hardware, flexible duct work, damper and plug are all included for easy installation.
  • Vent location is on the top, connected to flexible duct work, can vent through ceiling or wall for vent out (ducted) installation.
  • convertible design, can be ducted and non-ducted (with charcoal filters WRHF004S2, sold separately).
Check Stock

Winflo 36 In. Convertible Stainless Steel Wall Mount Range Hood with Aluminum Mesh Filters and Touch Sensor Control

  • Premium motor to provide powerful suction operating at 475 CFM air flow (high speed setting).
  • 3-Speed fan levels with delay shut off for the right amount of suction.
  • Easy to operate and clean touch sensor control panel with time display.
  • Easy removable dishwasher safe aluminum mesh filters.
  • 2 Bright energy saving soft white LED lights to illuminate your cooking area.
  • quiet operation keeps noise level less than 65db at high speed.
  • Adjustable and telescoping chimney can fit 7.5 Ft. - 8.5 Ft. ceiling, chimney extension for high ceiling is also available for purchase (part# WRHCE03).
  • Installation and mounting hardware, flexible duct work, damper and plug are all included for easy installation.
  • Vent location is on the top, connected to flexible duct work, can vent through ceiling or wall for vent out (ducted) installation.
  • convertible design, can be ducted and non-ducted (with charcoal filters WRHF004S2, sold separately).
Check Stock

Winflo 30 In. Convertible Stainless Steel/Glass Wall Mount Range Hood with Stainless Steel Baffle Filters and Push Button Control

  • Powerful suction operation at 282 CFM at high speed setting.
  • 3-Speed fan levels for the right amount of suction.
  • Easy to operate push button control for power, fan speed and light.
  • Durable, easy removable and dishwasher safe stainless steel baffle filters.
  • 2 Bright energy saving soft white LED lights to illuminate your cooking area.
  • quiet operation keeps noise level less than 65db at high speed.
  • Adjustable and telescoping chimney can fit 7.5 Ft. - 8.5 Ft. ceiling, chimney extension for high ceiling is also available for purchase (part# WRHCE01).
  • Installation and mounting hardware, flexible duct work, damper and plug are all included for easy installation.
  • Vent location is on the top, connected to flexible duct work, can vent through ceiling or wall for vent out (ducted) installation.
  • convertible design, can be ducted and non-ducted (with charcoal filters WRHF005S2, sold separately).
Check Stock