ReviewsWide Range Voltage Input

NOYITO AC to DC Precision Buck Power Supply Module AC 120V 100V-264V to 12V 2A 2000mA Isolated Step Down DC Module (12V 2A)

  • Isolated Precision Buck Power Supply Module ，Wide voltage range input with overload, short circuit, over temperature protection. Ultra-small size and high efficiency..
  • Input voltage range: AC 120V 100- 264V. Frequency range: 47-63Hz..
  • Output voltage: 12V ±1%. Output current: 2A 2000mA ..
  • Ripple: less than 60mVp-p. Output accuracy: +/-1%. Voltage regulation rate: +/-1%..
Check Stock

Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer

  • 【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
  • ultra-low input and output pressure difference..
  • 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
  • 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
  • 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
  • the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
  • 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Check Stock

DCDC Converter, DROK Step Down Voltage Regulator Module DC 4.5-40V 36V 24V to 1.25-37V 12V 9V 5V 3V Variable Buck Converter Adjustable Electronic Power Supply Volt Reduce Transformer Stabilizer Board

  • DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
  • Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
  • Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
  • Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
  • Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
  • please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
  • please add heatsink when the output power is larger than 15W..
Check Stock

Buck Converter 12v to 5v, DROK 5A USB Voltage Regulator DC 9V-36V Step Down to DC 5V-5.3V 5.2V 3.5-6A Volt Transformer Power Supply Module for Phone Fast Charging

  • DROK buck converter input voltage is DC 9v-36v, output voltage is 5.2V (5V-5.3V available according to your input voltage)..
  • The step down regulator adopts synchronous rectification scheme to provide wide voltage range, large current and high efficiency..
  • Our buck voltage regulator is user-friendly, accompany with DC interface and connecting terminals, make it easier to be connected to different devices..
  • The voltage reducer is with USB interface and quick charge identifying chip, and is compatible with Android and Apple..
  • Note: Input different voltage will output different power: input DC 9-24V, output 5.2V/6A/30W.
Check Stock

Furrion AC/DC Distribution Panel - Wall Mount with AC & DC Power Distribution for Both 30 Amp and 50 Amp Power Converters - FDP12WA-BL

  • 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
  • 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
  • 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
  • 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....
Check Stock

SWM

  • Technical Information - Frequency Range - 2000 kHz to 2150 MHz.
  • Input Voltage Range - 100 V AC to 120 V AC.
Check Stock

DC 12V 30A Power Supply 360W Universal Regulated Switching AC to DC Converter AC110V/220V (SMPS) Transformer Driver Adapter for LED Strip Light, CCTV Camera Security System, Radio, Computer Project

  • Switch power supply convert AC 110V/220V to DC 12V 30A 360W: The default input voltage is 110V, Output voltage is adjustable 10% , Metal case with many holes makes heat dissipation more efficient..
  • AC 110V/220V Input Voltage: We have already adjusted the switcher to 110V/115V for our US customers, if you want to use AC220V,don't forget to adjust the switch to the 220V side before use.★AC 110V/220V.Wide voltage input adjusted automatically to SMPS Model (12V 1A-5A, 12W-60W). As for Model (12V 10A-60A 120W-600W), there is a voltage selector switch located on the side of the switcher is used to set the input voltage to the power supply to either 110V/115V or 220V/230V..
  • High Efficiency and Reliability: Smart device surge protection for Short-circuit Protection, Overload Protection, Over Voltage, Over Temperature Protection. Low Temperature Rise.★Voltage consistency:There is no voltage fluctuations to speak of at power on, during transmit, receive, or at power off.★Built-in EMI filter, low output ripple, noise, Rugged heavy duty enclosure, 100% Full load burn-in Tested. Parallel/Redundancy Operation is possible..
  • Widely used in: Wide input voltage range, steady and precise output voltage.Great power transformer for Led Lighting and CCTV Camera Securit....
Check Stock

UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi

  • ❃❃ Package Included：3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
  • ❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
  • ❃❃ACS712 Hall Effect Current Sensor Module：Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • ❃❃Voltage Sensor Module：Voltage input range: DC0-25V.
  • input : Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
  • ❃❃Perfect Combination：Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
Check Stock

Juried Engineering TL072CP TL072 IC JFET Operational Amplifier & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 5)

  • The TL072 JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient..
  • Low Power Consumption, Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
  • Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% (Typical), Low Noise Vn = 18 nV/√Hz (Typical) at f = 1 kHz.
  • High-Input Impedance: JFET Input Stage, Internal Frequency Compensation, Latch-Up-Free Operation.
  • High Slew Rate: 13 V/µs (Typical), Common-Mode Input Voltage Range Includes VCC+, Example Applications: Motor Integrated Systems: UPS, Drives and Control Solutions: AC Inverter and VF Drives, Renewables: Solar Inverters, Pro Audio Mixers, DLP Front Projection System, Oscilloscopes.
Check Stock

DC Voltage Reducer Converter, DC 24V to 12V 5A Buck Converter, Automatic Car Step Down Up Voltage Regulator, Transformer Waterproof Module

  • High-quality material: Encapsulated with high-quality die-cast aluminum material shell, with good heat dissipation function, with silicone potting at the back, waterproof, dust-proof, shock-resistant, safe and reliable..
  • Power conversion efficiency: Using synchronous rectification technology and built-in smart chip, the voltage converter provides over/under voltage input, over temperature, short circuit, reverse input, waterproof, low voltage comprehensive protection..
  • Widely used: The output power is 60w, which is widely used in motors, driving recorders, car trucks, vehicles, golf carts, LED light strips, electric fans, cameras, lights, screens, monitoring systems, solar panels and DIY, etc..
  • Input rated voltage: 24V DC, accept (18V-36V DC) range.
  • Output voltage, current, power: DC 12V 5A 60W.
  • Input wiring type: red positive, black negative.
  • Output wiring type: yellow positive, black negative..
  • Adopt synchronous rectification technology, wide voltage input, improve conversion efficiency, maximum efficiency: 92%-97%.
  • If you have any questions, please feel free to contact us, We will reply within 24 hours..
Check Stock

AC 110V/220V to DC 12V 15A 180W Power Supply Transformer Switch,MKASYON AC/DC Switching Adapter Converter Driver for LED Strip Light,CCTV Camera,Security System Computer Project,Radio 12V15A

  • The input voltage: AC 110V/240V, the output power: DC 12V 15A 180W.Output voltage is adjustable 10%..
  • Safety features: Shortage Protection, Overload Protection, Over-voltage Protection..
  • Wide input voltage range, steady and precise output voltage.Size:L x W x H: 7.9”x3.9”x1.6”.
  • Great for LED Strips, radio transceiver, CCTV cameras,audio amplifier, computer project, wireless router, audio/ video power supply and more..
  • NOTES:Dual input voltage: AC 110V/220V. There is a switch, Please change the switch to 110V for USA.Before power on please check input voltage....
Check Stock