ReviewsWide Voltage Range

10L0L Golf Cart Digital Voltmeter Voltage Meter Waterproof 24V 36V 48V Battery Gauge 15V-120V Voltage Display for Club Car EZGO Yamaha

  • 【Waterproof & Shock-proof】This voltmeter uses a fully enclosed enclosure, a potted and fully waterproof design. Long-term immersion in water can....
  • 【Real Time Voltage Reading】:The digital voltmeter has high accuracy, can give a real time voltage reading of your batteries. You will never need....
  • 【Wide Voltage Range】The range of adaptation to the input voltage is as wide as 15-120V, whether it is an electric car of 36V, 72V, or even 96V, it....
  • 【Easy To Mount】Only two connection wires, just connect + to + and - to -. If you want to connect it through a key switch then connect + to switch,....
Check Stock

RioRand PWM DC Motor Speed Controller Switch Control 7-70V 30A Fuse

  • Wide voltage input 7-70V, maximum output current 30A .Adjustable potentiometer soft cable(about 15CM) can be separated, with running stop brake function.
  • Can be use on long hours of work: Circuit optimization design, stable Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.
  • Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses.
  • Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.
  • PWM Frequency and Share Space: 12KHZ ,The knob has a switch function, which can control the motor speed from 0% to 100%..
Check Stock

ACEIRMC 3pcs 20A 300W CC CV Step Down Module Adjustable DC 6-40V to 1.2-36V Voltage Regulator Buck Converter Constant Current Power Supply Module

  • Aceirmc buck converter input voltage range is DC 6-40V, adjustable output voltage range is DC 1.2-36V, can be used to convert 24v to 12v 5v, adjustable output current range is 0-20A, max output power is 300W. The step down regulator can apply to constant output current..
  • With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 95%,(measured at 20A, converting 24V to 12V)..
  • Short Circuit Protection: Self-recovery(cannot short circuit for long time). Plus, when input and output is common grounded, no-load CV output constant voltage,CC output constant current.
  • Adopting 75V / 80A large current dual MOS tube designed step-down board, Input and output use high frequency low resistance electrolytic capacitor, low ripple, and gives a stable output. Large current 30A connection screw terminals, more convenient to install.
  • Application: DIY stabilized voltage supply, LED car display, mobile power, industrial equipment appliances, LED driver, monitor, solar energy, fans, photovoltaic energy, motor, etc....
Check Stock

DCDC Converter, DROK Step Down Voltage Regulator Module DC 4.5-40V 36V 24V to 1.25-37V 12V 9V 5V 3V Variable Buck Converter Adjustable Electronic Power Supply Volt Reduce Transformer Stabilizer Board

  • DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
  • Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
  • Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
  • Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
  • Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
  • please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
  • please add heatsink when the output power is larger than 15W..
Check Stock

DS18 3AVS 14.4V Car Audio Stabilizer Constant Steady Output Voltage

  • DS18 3 amp Volt stabilizer - input any voltage between 6-16v and get steady output at 14.4V..
  • Wide voltage input, steady output voltage @ 14.4V..
  • Strong performance, high reliability, & best preset voltage.
  • Input voltage range: 6-16v. Output voltage: constant 14.4V..
  • Voltage stabilized accuracy: 003c 0.5%. Ripple factor: 003c 0.1%. transfer efficiency: 003e 85%..
Check Stock

UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi

  • ❃❃ Package Included:3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
  • ❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
  • ❃❃ACS712 Hall Effect Current Sensor Module:Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • ❃❃Voltage Sensor Module:Voltage input range: DC0-25V.
  • input : Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
  • ❃❃Perfect Combination:Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
Check Stock

Bridgold 10pcs LM339 339 Quad Differential Comparator ICS for High Voltage Digital Logic Gate Circuit, DIP14

  • Wide common mode input voltage range, Vic=0~Vcc-1.5V.
  • Input offset voltage is small, VIO=±2mV.
  • The differential input voltage range is very large, even equal to vcc.
  • The output is compatible with TTL, DTL, MOS, CMOS, etc..
Check Stock

DDR2 2x2GB (4GB Kit) 800MHz UDIMM RAM (PC2-6400) CL6 240Pin 1.8V Non-ECC Unbuffered Compatible All Motherboards Desktop Memory

  • 1. Strict testing: Compatible with all motherboards. Please note: Check the specifications of the device before purchasing. For example, computer motherboard model/RAM model/RAM slot/RAM frequency/maximum compatible memory capacity..
  • 2. Wide range voltage:1.425V~1.875V voltage range can work normally, effectively prevent voltage fluctuation/computer power supply aging, affecting RAM service life and work efficiency.Timings: CL6..
  • 3. Memory architecture :Adopt Samsung / Hynix / Kingston high-performance memory particles 128MB x 16 architecture mode, increase heat dissipation, more friendly to old motherboard / cpu .Compatible with all motherboards..
  • 4. Stability :high performance memory granule Double rank memory distribution, combined with a unique thermal design,, wide range voltage,Keeping the best at all times.Security : The appearance of aluminum alloy heat-drawn net helps to dissipate heat and prevent static electricity ..
  • 5. If you have any questions, please contact our service staff, we will solve it for you within 24 hours. We support returns and refunds within 30 days,1 year warranty. Thank you for choosing us and wish you a happy shopping..
Check Stock

Green Value LED 25008V Natural White 2-Pack LED Replacement Light Bulb Wedge Base Without Lens (921 Base)

  • Built with the finest LED lighting technology and materials..
  • Applications include 12 Volt DC auto, marine, RV and military vehicles. RV power fluctuations can damage a regular LED light. This LED is designed to withstand a wide operating voltage range..
  • 30,000 hour life expectancy. Lasts much longer than a standard light bulb..
Check Stock

Furrion AC/DC Distribution Panel - Wall Mount with AC & DC Power Distribution for Both 30 Amp and 50 Amp Power Converters - FDP12WA-BL

  • 【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
  • 【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
  • 【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
  • 【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock