ReviewsWidely Used In Motor

Inline Duct Fan 6 Inch Vent Booster, HVAC Exhaust Intake Fans 188 CFM, Ventilation Blower for Grow Tent Attic Kitchen Garage Greenhouse Basement (Φ 6 inch/110v)

  • DIY Your HVAC System 003e003e You can supply fresh air with one or more fans to DIY air circulation systems depending on the size of your space..
  • Widely Used Grow Tent Fan-- The 6 inch inline fan is widely used in homes,pets, offices, warehouses, restaurants, bars, shops, shopping malls, grow tents, greenhouses and other places where a lot of air is needed..
  • Large Airflow -- It is designed with high quality sleeve motor, quiet and service life more than 3 years, with rotational speed 2000 r/min, 188 CFM large airflow..
  • Over-heat Protection 003e003e The motor comes with low operating temperature and low heat generation, the built-in temperature protection device, the contact point is disconnected when the motor overheats, which acts as a power failure protection. double protection is safer..
  • Easy to install 003e003e 39" cable with plug, brown live wire, blue neutral wire, easy to install, please fix the fan to avoid noise due to looseness..
Check Stock

CHANCS TYC-50 Synchronous Motor 12V AC 5-6RPM CW/CCW 4W Gear Motor Fan Motor

  • This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
  • 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
  • 【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
  • 【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.
Check Stock

JIUWU 6pcs 25mm DC Gearbox Motor Bracket, Gear Reduction Motor Holder, High-hardness Metal Gear Motor Fixed Seat, Anti-rust Motor Mount Bracket

  • Geared motor mounting seat can be widely used in 25mm small gear motor series..
  • Used as an additional support for your motors or as an alternative mounting option..
  • This metal motor holder has convenient holes for mounting. The precision cut mounting holes is perfect matched with M3*5mm screw..
  • Bracket Size: 33 x 26 x 33mm / 1.3" x 1.0" x 1.3"(L*W*H).
  • Bracket Mounting Hole Dia: 3.5mm / 0.14"..
  • Package Included: 6* 25mm DC geared motor bracket.
Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

  • High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
  • Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
  • Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
  • Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
  • High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check Stock

Plastic Retainer Clips Car Fasteners Clip Auto Accessories, 723PCS Bumper Clips Kit Auto Rivets Fasteners Kit with 10 Cable Ties for Honda Toyota GM Ford Chevy

  • ...in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store..
  • Adaptability】 Our automotive push retainer Clip is suitable for Mercedes Benz, BMW, TOYOTA, Honda, Subaru, NISSAN, Ford, Mazda, Lancer for exact replacement. They are widely used for car panel, not only for the cars we mention, if the sizes and shape meet your requirement, it also works well..
  • The push clips are widely used for door panel, door trim clips, bumper clips,interior accessories and splash shield retainers replacement. All the necessary retainers for exact replacement of old and broken retainer. It also can work on other applications like motor, furniture and electronic equipment. Please check your fender clips' size, type and shape to make sure the bumper clips is the one that you need.If you have any questions please contact us.
  • Our automotive push retainer Clip is suitable for Mercedes Benz, BMW, TOYOTA, Honda, Subaru, NISSAN, Ford, Mazda, Lancer for exact replacement. They are widely used for car panel, not only for the cars we mention, if the sizes and shape meet your requirement, it also works well..
  • These Push clips are widely used for bumper clips, trim panel clips, door trim clips, door....
Check Stock

Electric Skateboard Motor BLDC D6374 190KV 3350W Belt Brushless Motor Outrunner Sensored 15t Pulley Engine for DIY Electric Longboard,Off Road e-Skateboard,Scooter,esk8,ebike Part Accessories-GOESKBA

  • ...vex magnets array can better match work with VESC FOC mode to greatly reduce the noise,hall plate fixed in the stator tightly,three M3 screws dispensing reinforced lock shaft prevent deviation,anti loose T-type motor shaft prevent slipping and loosening,multi-strand winding better dissipation and avoid skin effect..
  • Widely application GOESKBA Electric Skateboard Motor D6374 can be widely used in Electric skateboard,Longboard,Escooter,Ebike,battle robots,etc.
Check Stock

2PCS 8mm to 8mm Aluminium Plum Flexible Shaft Coupling 30mm Length 25mm Diameter Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • Material：Made of aluminum material with corrosion resistance and long life..
  • Size:L30mm x D25mm/1.18inch x 0.98inch( L*D) Diameter: 8mm to 8mm / 0.31inch to 0.31inch.
  • Product features: shaft coupling has high torque, high rigidity, good vibration resistance, flexible response and durability in removes stress between the motor and driving components..
  • Widely Used：The shaft couplers are widely used for servo motors, spindle, step motor etc..
  • Package Include:2pcs 8mm to 8mm D25 L30 Connector Flexible Coupler,1pcs M4 hex wrench..
Check Stock

2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling 25mm Length 20mm Diameter Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • Material：Made of aluminum material with corrosion resistance and long life..
  • Size:L25mm x D20mm/0.98inch x 0.79inch( L*D) Diameter: 5mm to 8mm / 0.197inch to 0.31inch.
  • Product features: shaft coupling has high torque, high rigidity, good vibration resistance, flexible response and durability in removes stress between the motor and driving components..
  • Widely Used：The shaft couplers are widely used for servo motors, spindle, step motor etc..
  • Package Include:2pcs 5mm to 6mm D20 L25 Connector Flexible Coupler,1pcs M4 hex wrench..
Check Stock

2PCS 5mm to 8mm Aluminium Plum Flexible Shaft Coupling 30mm Length 25mm Diameter Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • Material：Made of aluminum material with corrosion resistance and long life..
  • Size:L30mm x D25mm/1.18inch x 0.98inch( L*D) Diameter: 5mm to 8mm / 0.19inch to 0.31inch.
  • Product features: shaft coupling has high torque, high rigidity, good vibration resistance, flexible response and durability in removes stress between the motor and driving components..
  • Widely Used：The shaft couplers are widely used for servo motors, spindle, step motor etc..
  • Package Include:2pcs 5mm to 8mm D25 L30 Connector Flexible Coupler,1pcs M4 hex wrench..
Check Stock

Carbon Brushes 999038 for Hitachi Power Tool Motor

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

POWERTEC 70108 4 Inch Blast Gate for Dust Collector/Vacuum Fittings

  • Carbon Brush Size (Approx.): 10 x 5 x 5mm / 0.39" x 0.2" x 0.2" (L*W*H).
  • Package Content: 10 x Motor Carbon Brushes.
  • Carbon motor brushes are one of the most commonly replaced power tool components..
  • Worn brushes are often the cause of a poorly running motor. Replacing brushes can fix an intermittent motor and restore a motor’s electric braking..
  • The brushes are used widely for various of power tools and electric motors, such as circular saw, miter saw, drill,rotary hammer drill, dust collector, motorcycle, weed whacker, chop saw, blower motor, cut-off saw and ..
Check Stock