ReviewsWinch Mount Plate

Smittybilt 76892 XRC Atlas Front Bumper for 2007-2018 Jeep Wrangler JK 2/4-Door

Innovative 4-piece design meets stringent international safety standards.
3/16" cold rolled steel bumper with bolt-on skid plate and bull bar.
Lower design winch plate allows greater airflow.
Solid mount D-rings welded on the inside and out.
and marine grade stainless steel hardware.

Check Stock

TYT 3500 lb Advanced Load ATV/UTV Synthetic Rope Winch Kits, 12V Elelctric Winch with 2 Wireless Remotes and Winch Mounting Plate, Waterproof IP67 Recovery Winch for ATV UTV Towing Off Road Winches

Winch Pure copper motor: TYT 3500 lbs (1587kg) Orange frosted winch with synthetic winch rope length 9M x Φ5.5mm, which is able to withstand abrasive terrain without fraying. 12V DC 1.5Hp permanent magnet series wound motor and three-stage planetary gear system with free spooling clutch.(Do Not overload for 3500lbs).
Stable Control: Low-amp, sliding ring gear, gear ratio- 153:1, including orange mount plate, bar mount rocker control, 2 x wireless remote control, 1 x set of stainless steel fitting bolts, hawse fairlead, heavy duty hook and 3500 lb portable electric atv utv winch..
Precision Winch Braking System: Braking action is automatically applied to the winch drum when the winch motor is stopped and there is a load on the winch cable.(The winch can cause short circuits if wiring is wrong, please read the instruction carefully).
High-Performance: Fast line speed, high sensitivity of remote control. Waterproof and sandproof, unique brake design, excellent control. And, when TYT electric winch works, the sound is within 65 decibels. The roller fairlead creates a safe and smooth pull with the dependable 49-feet galvanized ....

Check Stock

TYT 12V 3500 lb Electric ATV/UTV Winch, Off-Road Waterproof Steel Cable Winch for ATV UTV Towing Trailer Winch with 2 Wireless Remotes and Winch Mounting Plate(3500 lb Winch)

Winch Pure copper motor: TYT 3500 lbs (1587kg) Orange frosted winch with steel cable length 15M x Φ5.0mm, which is able to withstand abrasive terrain without fraying. 12V DC 1.5Hp permanent magnet series wound motor and three-stage planetary gear system with free spooling clutch.(Do Not overload for 3500lbs).
Stable Control: Low-amp, sliding ring gear, gear ratio- 153:1, including orange mount plate, bar mount rocker control, 2 x wireless remote control, 1 x set of stainless steel fitting bolts, 4-way roller fairlead, heavy duty hook and 3500 lb portable electric winch..
Precision Winch Braking System: Braking action is automatically applied to the winch drum when the winch motor is stopped and there is a load on the winch cable.(The winch can cause short circuits if wiring is wrong, please read the instruction carefully).
High-Performance: Fast line speed, high sensitivity of remote control. Waterproof and sandproof, unique brake design, excellent control. And, when TYT electric winch works, the sound is within 65 decibels. The roller fairlead creates a safe and smooth pull with the dependable 49-feet galvanized super-duty aircraft cable. No load traction drag speed is 10.8 ft/min, all load The 3500 lbs drag speed is 2.6 ft/min..

Check Stock

Front Winch Bumper Compatible with Toyota 2016-2022 Tacoma Guard Bull Bar W/Winch Mount 4×4 Front Bumper

Front Winch Bumper guard compatible with 4×4 2016 2017-2022 Toyota Tacoma. Precision designed to match your vehicle’s body lines.
Solid all-welded construction for maximum strength and safety. High quality steel constructions, front winch bumper guard come prepped with powder coated. Rust protection. Built to strict quality control standards.
3/16″ Plate Front Bumper with 1/4″ Winch Mount,10,000 lb winch capacity (winch not included)..
Heavy duty mounting / recovery points that accommodate D-Ring shackles (Shackles not included). Fits 20″ LED dual row LED light bar (light bar not included).
Requires trimming of front bumper,easy bolt-on. No cutting and no drilling. Instruction is included. Material:Steel.

Check Stock

FIERYRED Winch Cradle Winch Mounting Plate Universal 2\ Trailer Hitch Winch Mount Bracket 1,300 lb. - 16,500 lb. Capacity for Recovery Winches,Fit for ATV UTV Truck

Heavy-Duty Construction: Fieryred applies fabricated steel in the manufacturing of this winch mount for ultimate strength and rigidity, and corrosion-resistant housing for superior durability..
Bolt-On Installation: Equipped with standard mounting holes, this winch plate can be easily mounted to virtually any vehicles. And there is no modification needed for a straight forward installation..
Corrosion-Resistance: Durable corrosion-resistant housing ensures intrepid resistance against corrosion, moisture, acid material and harsh weather conditions..
Front & Rear: This specially engineered winch accessory can be easily mounted to both front and rear of the vehicle, which could greatly expand its versatility in use..
Extraordinary Compatibility: This winch plate is suitable for winches rated between 1,300 to 16,500 lbs and is ready to be mounted to virtually any vehicles thanks to its 2 inch adjustable hitch..

Check Stock

ZEAK Cradle Winch Recovery Mounting Plate, 10'' × 4-1/2‘’ Universal fit Winch Mounting Plate, 15000 lb. Capacity

ZEAK cradle winch mounting plate own an Anti-rust powder coat finish,a durable black powder coating, which can be guaranteed not to rust easily and easy to clean..
Suitable for trucks, trailers and any other 4WD vehicles..
Standard 10’’x4-1/2’’ winch mount pattern,it’s easy for everyone to install this cradle winch.
The Zeak cradle winch mounting made of heavy duty steel ,durable construction.It is suitable for 8000lb to 15000lb winches,be tailor for 4WD competiton.
ZEAK products provide lifetime technical support.If you have any problem please contact us at any time..

Check Stock

Paramount Automotive 57-0306 Front LED Winch Bumper

Protects vehicles from on & off-road debris.
High strength D-Ring mounts welded both inside and out - 4.75 ton capacity.
Built in Winch plate will mount up to 12000lbs winch.

Check Stock

EAG Steel Rear Bumper with Hitch Receiver Fit for 1984-2001 Cherokee XJ

Manufactured from durable 5/32" steel and 2"x.120" tubing.
D-Ring mounts welded inside and out for increased strength.
Built in winch plate will mount up to 12000 lbs. winch.

Check Stock

SuperATV Winch Mounting Plate for Polaris Ranger Midsize 400/500 / Crew / 570/800 (See Fitment) | Powder-Coating Prevents Corrosion | Compatible with Many OEM and Aftermarket Winches

✔️【Fits】2011-2014 Polaris Ranger Midsize 400 | 2011-2013 Polaris Ranger Midsize 500 | 2012-2013 Polaris Ranger 500 Crew | 2017+ Polaris Ranger Midsize 500 | 2014-2021 Polaris Ranger Midsize 570 | 2014 Polaris Ranger Midsize 570 Crew / 800 | NOTE: 2017+ mounts are only compatible with the 3500lb winch..
【Ride More, Worry Less】SuperATV’s Polaris Ranger Winch Mounting Plate for the Polaris Ranger Midsize provides a secure mounting point for your Black Ops Winch, ensuring a safe and easy escape when you find yourself stuck in the mud. Knowing that you’re prepared for anything lets you ride more and worry less, because isn’t that what off-roading is all about?.
【Powder-Coated Steel Construction】 Made out of 3/16” heavy-duty steel plating. They arrive at your doorstep with all required hardware, making installation a breeze. Your winch mount is laser cut and CNC brake press bent to give you a product that is as tough as you are. ....

Check Stock

ECOTRIC Front Bumper Compatible with 1986-2006 Jeep Wrangler TJ YJ with Winch Plate D-Ring Rock Crawler Black

Fitment: This front bumper is compatible with 1986-2006 Jeep Wrangler TJ YJ, please check the car’s model and year before purchasing..
Function: This bumper will protect the car body from scratches, and the design will bring your car with a sporty looking..
Feature: Fits up to 37″ tire. Winch plate:24 X 7. Steel construction 2″ X 120″ wall.Overall Dimension: 56-1/8″L x 12″W x 16-3/8″H. Built in winch plate for mounting winch which is more than 9,000Lbs.Built in safety catch for those uneven parking situations..
Feature: Two lights tabs on the hood is for you to mount extra lights if you need. Heavy Duty Steel construction with powder coat finish, textured black powder coat for corrosion protection and durability. Which is tough enough..
Package Include: 1 piece of front bumper. Necessary hardware and installation instructions are included..

Check Stock

Rugged Ridge 11543.16 Spartacus Winch Plate; 18-Current Jeep Wrangler / 20-Current Gladiator , Black

Winch Mount Plate: Allows for the mounting of a winch up to 12,500 lbs. capacity on factory Rubicon Steel Bumpers and Spartacus front bumpers. Precision tooled for an exact fit and finished with durable black-powder coating.
High Strength: An all steel construction provides an unwavering foundation for mounting most brands of aftermarket winches. Includes winch plate, brackets, hardware and instructions.
Off-road Accessories: Get serious about off-roading with a variety of tow hooks, hitches and kits that give you a way out in sticky situations. We offer winches, recovery gear, tube doors, mirror kits and more accessories.
Rugged Ridge Jeep Parts: Count on Rugged Ridge to provide you with proven Jeep parts and accessories like bumpers, lift kits, wheels, interior accessories, floor liners and more for varying Jeep models.
Five Year Warranty: Our Rugged Ridge products are covered by an industry leading 5 year warranty and Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusion.

Check Stock