ReviewsWinding Pipe Extrusion

TECBEARS PLA 3D Printer Filament 1.75mm Transparent, Dimensional Accuracy +/- 0.02 mm, 1 Kg Spool, Pack of 1

【Premium PLA Filament & Strong Bed Adhesion】TECBEARS has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects. Recommended Extrusion/Nozzle Temperature 190°C – 210°C, Bed 60°C – 80°C for better printing results..
【No Clogging & No Bubbles & Smooth Printing】Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
【Less-tangle & Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy + / – 0.02 mm without any exaggeration..
【Strong After-sales Support】Whenever or why, when encountering any printing problems you can contact us, we will solve it. Be your reliable 3D filament supplier..

Check Stock

KINLUOT PLA 3D Printing Filament 1.75mm, 3D Printer PLA Filament 1KG Spool(2.2lbs), Dimensional Accuracy +/- 0.03mm for 3D Printers, Purple

【Premium Material】Premium PLA consumables offer incredible printing convenience Optimized printing quality, high purity with low shrinkage and excellent lamination to meet your needs for printing projects with higher toughness functional parts..
【Less tangled wire, easy to use】 Fully mechanical winding and strict manual inspection to ensure a neat and tangle-free wire bundle, avoiding possible wire breaks and disconnections.
larger spool inner diameter design for smoother feeding..
【Dimensional accuracy and consistency】 High precision automatic diameter measuring machine and adaptive control system ensure these 1.75 mm diameter PLA filaments with dimensional accuracy +/- 0.03 mm.
【Cost-effective and compatible】With over 11 years of experience in 3D wire development, we are able to mass produce a wide range of high quality wires for most FDM printers on the market..
【No clogging, no air bubbles, easy to use】 Completely dried for 24 hours before packaging and vacuum sealed in a nylon bag Recommended PLA filament extrusion/nozzle temperature 195-230°C, bed 0-60°C..

Check Stock

Flashforge 3D Printer Filament PLA 1.75mm, 3D Printing Filaments 1kg Spool-Dimensional Accuracy +/- 0.02mm, Environmental Friendliness, no Smoke and no Odor (White, PLA)

[Performance]-Flashforge PLA 1.75 mm filament is a high-performance PLA material with much great strength and toughness, and its environmental friendliness, no smoke and no odor.
Low material shrinkage, stable printing size.
[Clog-Free, Bubble-Free & Easy-to-use]- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
Recommended PLA Filament Extrusion/Nozzle Temperature 190-220 degree, no need heating raft, low demand to printers.
[Less -tangle and Easy to Use]- Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.
Larger spool inner diameter design makes feeding smoother.
[Wide Compatibility]-Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.

Check Stock

Flashforge PLA Filament 1.75mm, 3D Printer Filaments 0.5kg Spool-Dimensional Accuracy +/- 0.02mm for Adventurer 3 Series (White)

【Performance】--- Flashforge PLA 1.75 mm filament is a high-performance PLA material with much great strength and toughness, and its environmental friendliness, no smoke and no odor.Low material shrinkage, stable printing size.
【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 190-220℃, no need heating raft, low demand to printers.
【Less -tangle and Easy to Use】-- Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.
Larger spool inner diameter design makes feeding smoother.
【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied.Any questions regarding product operation please feel free to contact us.

Check Stock

TECBEARS PLA 3D Printer Filament 1.75mm Black+ Gray, Dimensional Accuracy +/- 0.02 mm, 1 Kg Per Spool, Pack of 2

【Premium PLA Filament & Strong Bed Adhesion】TECBEARS has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects. Recommended Extrusion/Nozzle Temperature 190°C - 210°C, Bed 60°C - 80°C for better printing results..
【No Clogging & No Bubbles & Smooth Printing】Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
【Less-tangle & Wide Compatibility】Full mechanical winding and strict manual examination, which guarantee the PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration..
【Strong After-sales Support】Whenever or why, when encountering any printing problems you can contact us, we will solve it. Be your reliable 3D filament supplier..

Check Stock

LLPT Self Fusing Silicone Tape 1 Inch x 17 Feet Self Bonding Miracle Rubber Wrap Tape for Hose Emergency Repair Handlebar Barbell Pull Up Bar Dumbbell Tools Black (SF006)

Package include:2 rolls self fusing silicone Tape,Each roll of tape is 10feet long.The width of pipe hose repair tape is 1inch/2.5cm..
Material:The multi-purpose adhesive tape is made of quality silicone material, lightweight and good durability, firm to use..
Easy to use:Our silicone tapes they have no stickiness, just tear off the protective film and stretch tape for wrapping, the tape will self-melt and become a whole under certain pressure which can provide a sealed, insulating and waterproof environment..
Wide use:This silicone tape can be used in wire winding or wire repair occasions.This waterproof silicone is an excellent helper for solving water pipe leaks..
If you have any questions about our products, you can contact us by email, we will reply as soon as possible and solve your problem 100%.

Check Stock

TECBEARS PETG 3D Printer Filament 1.75mm Orange, Dimensional Accuracy +/- 0.02 mm, 1 Kg Spool, Pack of 1

...3, Ender 3, Monoprice FlashForge and etc..
[Dimensional Accuracy & Consistency] Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
[Printing Tips] Recommended Extrusion/Nozzle Temperature 220°C - 250°C, Bed 70°C - 80°C.It will be your risk-free choice, please be assured that we’ll always stand behind our products..

Check Stock

Flashforge 3D Printer Filament ABS Pro1.75mm, 3D Printing Filaments 1kg Spool-Dimensional Accuracy +/- 0.02mm, Environmental Friendliness, no Smoke and no Odor (Orange, ABS Pro)

[Performance]-Flashforge PLA 1.75 mm filament is a high-performance PLA material with much great strength and toughness, and its environmental friendliness, no smoke and no odor.
Low material shrinkage, stable printing size.
[Clog-Free, Bubble-Free & Easy-to-use]- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
Recommended PLA Filament Extrusion/Nozzle Temperature 190-220 degree, no need heating raft, low demand to printers.
[Less -tangle and Easy to Use]- Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking.
Larger spool inner diameter design makes feeding smoother.
[Wide Compatibility]-Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.

Check Stock

JAYO 3D Printer PLA Filament 1.75mm，Dimensional Accuracy +/- 0.02mm, 3D Printing Material fit for FDM Printers (PLA Bk)

【Tangle Free】During JAYO 1.75mm PLA filaments production,we provide the full mechanical winding and manual examination, Making the PLA spool filament easy to be fed. Please insert free end of filament into spool holes to avoid being tangled for next use..
【Print Parameter】Our PLA filament recommended extrusion temperature 200°C - 230°C, Heated Bed Temp: 60°C - 80°C. Melt index: 7-9g/min.Precise 3D print parameters remove your printing confusion and worry..
【Wide Compatibility】With thousands tons of filaments output each month and years' of 3D printing filament research and develop experience. Makes JAYO filament harmonizes perfectly with all common 1.75mm FDM 3D printers. Such as SUNLU S8, S8 Pro, Ender series, Mega series etc..
【Package & Warranty】Vacuumed sealed package keeps our 3D printer filaments at an optimal storage condition.No dust, no dirt before opening.After sales service: fast and effective 24x7 professional customer support, assistance of the product engineer team..

Check Stock

IEMAI PETG 3D Printer Filament Transparent Blue, PETG Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1KG Spool for 3D Printer

【Accuracy & Consistency】JAYO 3D printer PETG filament are produced with high precise specification. Dimensional Accuracy 1.75mm + / - 0.02 mm. No bubbles, no clogging, low odor, low warping to ensure smooth and stable prints..
【Tangle Free】During JAYO 1.75mm PETG filaments production,we provide the full mechanical winding and manual examination, Making the PETG spool filament easy to be fed. Please insert free end of filament into spool holes to avoid being tangled for next use..
【Print Parameter】JAYO PETG 1.75mm 1kg Filament Extrusion/Nozzle Temperature: 215°C-230°C (419°F - 446°F), Heated Bed Temperature: 60°C - 80°C. Melt index: 7-9g/min.Precise 3D print parameters remove your printing confusion and worry..
【3D partner】3D printing works makes your idea a reality, PETG Filament can be your tool partner to fuilfill the 3D printing dream.I t can borden your imagery world, stimulate your ceative ability, and bring you a unusual printing experience..
【Package & Warranty】Vacuumed sealed package keeps our 3D printer PETG filaments at an optimal storage condition.No dust, no dirt before opening.After sales service: fast and effective 24x7 professional customer support, assistance of the product engineer team..

Check Stock

ERYONE PETG Filament for 3D Printer, 1.75mm, +/-0.03mm, 1kg(2.2LBS)/Spool,White

✔️【Setting Specification】--ERYONE 1.75mm transparent PETG Filament bundle 1kg helps you print without stringing and warping issues under optimal settings. Extrusion/Nozzle Temperature: 215°C-230°C (419°F - 446°F), Heating Plate /Bed/Platform Temperature: 80-100°C(140°F - 176°F), Speed: 40-80mm/s..
✔️【Clog-free & Bubble-Free】-- Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture. As the PETG material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.
✔️【Less- tangle and Easy to Use】-- Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed.
Larger spool inner diameter design makes feeding smoother.
✔️【Dimensional Accuracy & Consistency】-- Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PETG filaments of 1.75 mm diameter, dimensional accuracy 99% Probability + / - 0.03 mm.

Check Stock