ReviewsWing Bolts

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

ABN Wing Nut Assortment Set - 150pc Standard SAE Steel Wall Anchors Wing Nuts for 3/16in, 1/4in, and 5/16in Bolts

  • [Secure Anything]: Use the ABN Wing Nuts Assorted Sizes Kit to secure your bolts and screws for applications where frequent adjustments are needed or for quick part removal.
  • [Fits Your Every Need]: 6 assorted wingnuts sizes include 1/4-inch wingnuts with a 20 or 28 thread count, 5/16-inch wingnuts with an 18 or 24 thread count, and #10 machine screw wingnuts (3/16-inch) with a 24 or 32 thread count.
  • [Built To Last]: Constructed from stainless steel with a zinc-coated finish, these assorted size wing nuts ensure maximum strength, longevity, and resistance to rust and corrosion.
  • [Easy Storage]: 8.3 x 4.3 x 1.3-inch (21 x 10.9 x 3.3cm) transparent plastic carrying case for easy transportation, safe storage, and quick organization.
  • (6) 4 x 1.3-inch (10.2 x 3.3cm) compartments contain the different size wing nuts.
  • [Contents]: Wing nut variety pack includes (150) individual butterfly fastener small wing nuts.
  • (60) #10 machine screw wingnuts, (50) 1/4-inch screw wingnuts, and (40) 5/16-inch screw wingnuts.
Check Stock

(21 Pieces) Cymbal Replacement Accessories, Cymbal Felts Hi-Hat Clutch Felt Hi Hat Cup, Felt Cymbal Sleeves with Base Wing Nuts, Washer, Sleeves and Base Wing Nuts Replacement for Drum Set

  • Product Details:3 x cymbal sleeves with base (8 - 10 mm), 6 x cymbal Felts(8 - 10 mm), 4 x hi-hat clutch felts (6 - 8 mm), 2 x bracket tube felts(6 - 8 mm), 3 x wing nuts(8 mm), 3 x cymbal washers(8 mm)(21 Pieces).
  • High-quality felt pad, sturdy and durable, prevents collision between the cymbal and metal, protects the cymbal well, and improves the sound quality and performance of the cymbal..
  • QUALITY FELTS - All pieces are made of quality fibre-optic felt which are designed to last longer and provide better protection for your cymbals,Smooth fitting sleeves: Set your cymbals in perfect positioned at the optimum height, which will help you control the setting of your drum set and delivering in good performance..
  • Essential drumming emergency kit with replacement cymbal and hi-hat felts, combined with full set of new cymbal stand wing bolts and sleeves, suitable for boom stands, cymbal stackers or heavy duty cymbal stands..
  • Wing bolts and washers: they can help to secure your cymbal and felt together tightly, making sure you'll never miss a beat (or cymbal) because of cymbal rotation problems..
Check Stock

Fasten Tight Black Nylon - 10-24 Knurled Thumb Nuts 25pack

  • ThumbNuts are easily removed, Easier more compatible than Wing Nuts.
  • Inlcudes 25 - Black Nylon Plastic Thumb Nuts fit 10-24 Imperial thread Carriage Bolts.
  • Black Nylon66 suitable where non-conductivity, corrosion resistance, and cost are important considerations.
  • Tools not necessary for tightening or loosening, Ensure a lasting hold for any project.
  • Fit the standard bolts on pet carrier cages and kennels.
Check Stock

WREOW Wing Nut Driver Set 1/4\ Hex Shank Slot Wingnut Drill Bit Socket Wrenches Tools Set for Panel Nuts,Screws Eye C Hook Bolt and Q-Hanger (3 PACK)

  • This compact wing nut driver is made from CR-V steel, highly strong and sturdy..
  • These wing nut driver sets are designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concerning about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • Quickly to tighten and simply turn the wing nut by power drill. Works on any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand..
  • The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slot cutout is 4mm(0.157 inch) wide..
Check Stock

LONKER (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye C hook bolt (2-pcs)

  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook screw up to 5x faster than you can by hand.
  • Hurricane Wing Nuts Driver Set A must have tools for hurricane/Snowstorm protection for windows doors hardware.
Check Stock

PAGOW Upgraded Large Slotted Hurricane Wingnut Driver - Wing Nut Drill Bit Socket Tool 1/4 Hex Shank for Panel Wing Nuts Screws Eye C Hook & Q-Hanger Steel

  • This wing nut driver has a big slot with more than 7.5mm (0.3 inch) wide, which's bigger than other wingnut drivers, if you are looking for a big one....
  • Quickly to tighten, just simply turn the wing nut with a power drill. Your impact driver or drill you drive just about any wing nuts bolt or C head....
  • Designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panel, matches with any power drill....
  • A must have for hurricane prone areas, up to 5x faster than you can by hand, save your time when hurricane is coming..
  • Made from CR-V steel, which is highly strong and sturdy for long time use..
Check Stock

Toilet Bolts,Toilet Tank to Bowl Bolt Kits with Rubber washers and Wing Nuts Stainless Steel Toilet seat Screws,Toilet Tank Heavy Duty Bolt 2 3/4\ x 5/16\ (M70 x 8) 2 Pack

  • Material: Toilet Tank to Bowl Bolt are made by 304 stainless steel and high-quality NBR rubber,no rust problems..
  • Size: 3" x 0.3" ,Standard size, stainless steel Wing nuts for easy install.
  • Large Rubber Gromets onboth upper and lower sides, preventing leakage, Just apply pressure and keep the wing nut and screw in a straight line during installation, no burrs or other defects.
  • Multifunctional: You can use them to replace the rusty and corroded toilet bolts of the toilet seat screws and toilet tank bolts.
  • Good shopping experience: If you have any questions about our products, please come to us for consultation, and you will be given a perfect answer within 24 hours.
Check Stock

SPOILER AND WING KING Brand Factory Style SRT Spoiler Made for The Chrysler 300 2012-2020 Painted in The Factory Paint Code of Your Choice 563 PX8

  • Your Spoiler and Wing King spoiler will include molded in metal inserts with matching machine threaded bolts, washers and lock washers providing....
  • All Mounting Hardware and Detailed Instructions are Included..
  • Spoiler and Wing King has built its reputation on having the Best Quality, Best Fit, Best Warranty and Best Service in the spoiler industry. Your....
  • Made from OEM Grade Blow Molded ABS Plastic by the Spoiler and Wing King factory and backed with a Lifetime Warranty. WE ARE CONFIDENT THAT YOUR....
Check Stock

PANOVO (2pc) Power Wing Nut Driver Set,Slot Wing nuts Drill Bit Socket Wrenches Tools Set,1/4\ Hex Shank Drills Bits for Panel Nuts screws eye hook bolt

  • 2pcs in a package - This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing shutters/panels or doing other projects, and saves lots of your time and get your job done more faster..
  • quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or head Eye hook screw up to 5x faster than you can by hand..
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers..
  • This wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch).
  • the outer diameter of the socket is about 17.8mm(0.7 inch).
  • and the slots on the drill bit tool is 4mm(1.55 inch) wide..
  • Wing Nuts Driver Set A must have tools for Snowstorm protection for windows doors hardware.
Check Stock

Pagow Deep Power Wing Nut Driver Set- Slot Wing Nuts Drill Bit Socket Wrenches Tools Set Hex Grooved Socket for Panel Nuts Screws Eye C Hook Bolt Q Hanger 1/4 Hex Shank 2

  • Size: this steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about....
  • This drills nut driver bit designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurri shutters/panels or....
  • Just pop it into a power screwdriver and get the wingnut / shutters installed without concern about spraining your thumbs by using other hardware....
  • Quickly to tighten simply turn the wing nut by power drill. your Impact Driver or Drill you drive just about any wing nuts bolt or C head Eye hook....
  • This nuts tools A must have for hurricane Snowstorm prone areas.
Check Stock