ReviewsWiper Transmission Shaft

Cardone Select 85-168 New Wiper Motor

  • Improved over original performance, gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and....
  • 100% load testing ensures guaranteed performance every time.
  • Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
  • Magnets deliver the right amount of torque needed to withstand extreme weather conditions and to compensate for other worn components in the wiper....
  • Units are designed with extra torque motors to prevent premature failure resulting from worn wiper transmission linkage.
Check Stock

9706529 W11086780 Gear - by Huthbrother, Compatible with 5 & 6 QT WP9706529 9703543 Replacement Gear Parts, With 9709511 Gaskets And 1.8 Oz Grease & 9703680 Circlip

  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • The transmission structure of shaft gear wheel is simple, compact, small volume and light weight..
Check Stock

uxcell Cable Wire Binding Protection Flexible Spiral Tube Wrap Band Black

  • Can also pass through a bearing with an inner diameter of 5mm and use it with other robot parts with matching hexagonal holes, which greatly enhances the load bearing and transmission capacity of the robot parts..
  • High quality stainless steel material, with high hardness, wear resistance and durability, used as a drive shaft accessory for intelligent robots, and also suitable for lathe equipment and engineering equipment..
  • You can use a metal cutting blade to cut the Φ5mm stainless steel hexagonal shaft to your own customized length according to your needs..
  • The Φ5mm stainless steel hexagonal shaft has an outer diameter of 5mm and an appearance of a hex with a plane spacing of 4 mm. It is a perfect combination of a circular shaft with a diameter of 5mm and a hex with a plane spacing of 4 mm. It has the advantages of round shaft and hexagonal shaft..
  • Can be used with other robot parts and accessories with matching hexagonal holes, which can effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the force of the....
Check Stock

TMC FO1597 Heavy Duty Stainless Steel Dual Windshield Wiper Arm 13 1/2-17 3/8 inches

  • Pantographic arms allow the wiper blade to remain in a vertical orientation, sweeping a more useful pattern on the windshield.
  • Adjustable Marine Wiper Arm extends from 13-1/2 to 17-3/8 inch ( 345mm to 440mm). Suitable for standard and heavy-duty motors.
  • Made of AISI316 Stainless Steel and Black Coated to ensure reliable performance and corrosion resistance.
  • Requires a heavy-duty motor with a 9/16 inch (14mm) shaft.
  • Includes a Hex Key to be adjusted. Compatible with model FO-746. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

22-560 22-563 22-565 22-580 TP400LS 6560 Drive Belt Compatible with Delta & WEN Planer 1Pcs

  • Compatible with Delta TP400LS 22-560 22-563 22-565 22-580 Planer.
  • Multi wedge belt, also known as multi groove belt, the transmission shaft of the machine using this belt can be adjusted, so the length of the belt is plus or minus 0.19 inches, which will not affect the use under normal conditions. If you have any questions before or after purchase, please contact me in time.
  • Precautions for belt use: 1. The belt and pulley shall be kept clean and shall not be stained with oil and water.
  • 2. When installing the belt, check: A. whether the transmission shaft and the transmission wheel are vertical, B. whether the transmission shafts are parallel, and C. whether the transmission wheel is in the same plane.
  • 3. Extreme cold and heat will destroy the chemical structure of the belt.
  • 4. When the machine is running, try to keep it horizontal..
Check Stock

VGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model

  • High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
  • Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
  • Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
  • Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
  • Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..
Check Stock

Lirinsegie Bicycle DAG-2.2 Derailleur Hanger Alignment Gauge Compatible with 20” to 29” Mountain Biking and Road Cycling Wheels

  • Features: It is a tool for modifying and adjusting MTB and road bicycle wheel transmission shift. It is compatible with all 20 "to 29" bicycle wheels..
  • Functions: Used to correct the rear variable lug to solve many transmission speed problems, especially the positioning rear transmission system. Improve gear ride, help us more accurately adjust our gear change to improve our driving speed..
  • Advantages: The main body adopts stainless steel tube frame, diamond shaped straightener bar, large inner shaft, high strength, 360° rotation correction, accurate reduction of the original transmission gear position, to correct the low clearance of the shaft hanger..
  • Easy to Use: For details, see Description. Our products are strictly tested and controlled before leaving the factory, and the quality is reliable..
  • Packing List: 1×Bicycle Derailleur Hanger Alignment Gauge（as shown）..
Check Stock

Dual Clutch Transmission Remover Installer Tool Compatible with Ford Focus, DCT Dual Clutch Transmission Reinstall Reset Tool Set for Reuse DCT F1FZ-7B546-B, Clutch Transmission Tools Accessories

  • 【Dual Clutch Transmission Tool with Good Compatibility】The dual clutch transmission remover installer tool is made of heavy-duty steel, which is corrosion-resistant and high in hardness. Perfectly compatible with Ford Focus DCT dual-clutch transmission DPS6..
  • 【Professional Dual Clutch Transmission Tool】Reuse the removed/previously installed dual-clutch assembly. It resprings/re-trips the springs on the clutch so that the user can reinstall it..
  • 【Durable Dual Clutch Transmission Tool】The surface of the dual-clutch transmission remover installer tool is specially phosphated, which not only prevents rust, but also has a longer service life. With this tool, you will not need to purchase any new DCT clutch components..
  • 【How to Use the Dual Clutch Transmission Tool】Install the special tool and press the input shaft tightly. After the threaded bar is in contact with the input shaft, it rotates 20 times..
  • 【All-In-One DCT Tool Set】The dual-clutch transmission tool is equipped with a toolbox, which is very convenient for product organization and storage. If you have any q....
Check Stock

Max Motosports 5 Speed Transmission for Peerless 700-023 FD Kees 539101951 14398 T7520

  • 1 x Brand New Transmission, 36 spline input shaft.
  • Replaces Part Numbers for: Peerless 700-023, FD Kees 539101951.
  • Specially formulated transmission grease-Provides superior lubrication and performance.
  • Die cast aluminum housing- Offers outstanding heat dissipation and durability, Oil-impregnated bushings-With needle bearings on input shaft.
  • Neutral start capability-Allows the installation of a switch to sense if unit is in gear or in neutral.
Check Stock

VEVOR PTO Shaft, 1-3/8' PTO Drive Shaft, 6 Spline Tractor, Round Implement Ends PTO Driveline Shaft, Series 4 Tractor PTO Shaft, 43'-61' Brush Hog PTO Shaft Black, for Finish Mower, Rotary Cutter

  • ...ft is designed with a telescoping steel tube, a universal joint, and yokes. It has 35 Hp, 26 Kw, and 460 Nm torque at 540 rpm, while at 1000 rpm features 53 Hp, 39 Kw, and 360 Nm torque. It allows two sides of the PTO drive line shaft to spin at different speeds..
  • Easy Assembly＆Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for effortless direct replacement. The security chain and sturdy shield eliminate potential dangers in the transmission process..
  • Wide Application: The PTO (Power Take-Off) shaft transfers the power from the tractor to the PTO powered attachment. It is widely used on mowers, wood chippers, rotary tillers, rotary cutters, brush cutters, hush hug, tractors, fertilizer spreaders, and more. Control the speed and power of your machine effectively. Powerful torque conversion and reliability will leave you wishing you got our PTO shaft sooner.
Check Stock