ReviewsWire Cable Locator

Triplett Low Voltage Pro 30SR Network Cable Tester/Verifier with 12 Tester Apps and 8 RJ45 Smart Remotes - COAX, CAT5/5e/6/6a/7, Shielded/Unshielded

  • Run a variety of cable testing procedures including Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, and 10/100/1000 indication.
  • Preloaded with a powerful cable testing pack and 13 device testing apps, plus Length Return Loss Quality (RLQ) Pack Apps, Alert LEDs to indicate POE, Tone Locator, Port Blink, Speaker Pop, Speaker 7.1 ID and Wall Jack ID.
  • Perform detailed wire map and measure cable length and distance to open or short.
  • Check line voltage on RJ45 (PoE) and telephone lines.
  • Includes 10 RJ45 remotes, 10 Coax remotes, F Male to BNC Male, F Male to BNC Female RJ45 patch cable (2), RJ45 to alligator clip adapter, USB cable, case, 9V battery, RLQ adapters and SR remotes.
Check Stock

Ubiquiti U Fiber Multi-Mode SFP 10G - UF-MM-10G

  • ★This is a multi-purpose toolkit, it can provide the tools necessary for the assembly of mechanical splices and it will bring you a higher working efficiency. 1mW Visual Fault Locator Fiber Optic Cable Tester Meter..
  • ★FTTH optical fiber cold construction kit is Fttx FTTH rapid connection in the construction of rubber insulated wire stripping, fiber cutting, cleaning and testing..
  • ★Pocket size and light weight, easy to use. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving..
  • ★It is an ideal tool for construction operators. Can be used for indoor cable stripping coating layer and positioning length It can be used to locate the indoor cable into the optical fiber cutting knife..
  • ★We ship from the United States, and if you are not satisfied with the product, we will provide you with a refund.
Check Stock

RIDGID 44473 SR-24 Utility Line Locator, Black

  • Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Product 2: Lightweight and compact transmitter that delivers up to 5 watts of power (3 power output settings) for line locating, underground cable location, and more.
  • Product 2: Transmit 2 frequencies simultaneously.
  • Product 2: Easy to use - Convenient buttons with LED light indicators, audio feedback confirms a good circuit before beginning a trace, and easy carry straps.
  • Product 2: Generates frequencies: Direct Connect - 1 kHz, 8 kHz, 33 kHz, 262 kHz*.
  • Induction - 1 kHz, 8 kHz, 33 kHz, 262 kHz*.
Check Stock

Sewer Camera Locator, 512hz Pipe Locators Inspection Camera Receiver Transmitter Professional Plumbing Drain Camera Locator for Water Supply Pipelines(US Plug)

  • Receiver: The receiver of this sewer camera locator detection has a built in induction coil for receiving the magnetic signal from the pipe, and the transmitter head is loaded by the microcontroller and transmits the signal of a specific frequency..
  • Transmitter: The transmitter of this pipe locator underground has two receiving modes: far (note: about 5 meters) and near (note: about 1 meter). Adjust the sensitivity knob, peak mode (max) or zero mode (min) to position the transmitter..
  • Accurate Positioning: The 512hz locator locates problem locations faster, effectively solving the arduous task of inspecting sewer pipes, gutters, and narrow underground environments..
  • Long Service Life: The pipe locator tool has built in polymer lithium battery, 3000mAh (receiver), LR44/160mAh (transmitter), charging time is 6 hours, battery working time is about 10 hours. 3 level battery indicator light..
  • Wide Application: This sewer camera locator only is widely used for water supply pipelines, air conditioning pipelines, cable pipelines, lead industry pipelines, underground pipeline construction, underground cave exploration, underwater research, etc..
Check Stock

RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device (Renewed)

  • Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Ideal when locating using SeeSnake inspection camera reels, other sondes, and those who occasionally locate energized lines.
Check Stock

ANYSUN Sewer Camera's Accessories- Cable (100FT)

  • 【Anysun Professional R&D 】Here at Anysun we strive at producing the best quality inspection cameras that range from small borescope to complete inspection system. Our newest inspection system now comes with a 512Hz sonde inside the camera probe and also comes with a locator to locate the transmission from the sonde. An excellent choice for anyone looking for a complete set that works great together..
  • 【512Hz Underground Pipe Locator 】 Our easy-to-use Anysun underground pipe locator is a great choice for locating sondes and utilities. The 512Hz locator is effective against inspections and drain cleaning. When the signal is weak, we can choose the far mode, the effective distance is 23FT. When the signal is strong, we can choose the near-end mode, the effective distance is 13FT. Toggle between peak and null to minimize interference and maintain the location of the sonde or system..
  • 【Inspect With Confidence】 Anysun 0.9”IP68 waterproof color camera probe, is small and versatile and fits most pipes bigger than 1” in diameter. The camera comes with 12 adjustable LED lights and has a wide-angle view of up to 140° and can orientate the display to level straight-up. The semi-rigid cable is made of fiber optics and is optimized for further pushes....
Check Stock

RIDGID 19238 NaviTrack Scout Locator, Underground Pipe Locator and Underground Cable Location Device & 16728 Remote Transmitter (512 Hertz Sonde) for Underground Pipe Location,Red/Black,Small

  • Product 1: Multi-directional antenna technology sees the entire signal all of the time - maximize the signal strength to find the target pipe, sonde, or energized line.
  • Product 1: Underground pipe locator verifies position using a micro-mapping display to mark distinctive poles in front of and behind the target, ensuring an accurate locate.
  • Product 1: When using as underground cable locator or pipe locator, the Navitrack Scout automatically calculates and displays depth when oriented over the target..
  • Product 1: Meets FCC Class B and EN 55022 Class B - operates in these standard frequencies: Sonde - 16 Hz, 512 Hz, 640 Hz, 874 Hz and 33 kHz.
  • Line Trace - 128 Hz, 1 kHz, 8 kHz and 33 kHz.
  • Product 2: Attach remote transmitter to drain cleaning cable or a water jet hose to locate pipe underground.
  • Product 2: Flashing LED to indicate that sonde is transmitting and ready to operate as a beacon during underground pipe location.
  • Product 2: Meets FCC Class B and EN 55022 Class B requirements.
  • Product 2: Adapters (catalog # 19263, 19268, 19273, and 19258) attach transmitter to drum machine or sectional cables provide versatility in locating underground pipe and line detection.
Check Stock

VFLTOOL Fiber Optic Termination Tool Kit - 9 in 1 Assembly FTTH tool kit with FC-6S Cleaver Optical Power Meter Finder - 30km Visual Fault Locator Optical Pliers Cable Cutter Stripper

  • FTTH Equipent Accessories: 9 in 1 Assembly FTTH tool kit Includes Optical Power Meter which works with LC, FC, ST, SCAPC, 30km Visual Fault Locator....
  • Optical fiber cold construction kit is Fttx FTTH rapid connection in the construction of rubber insulated wire stripping, fiber cutting, cleaning and....
  • For All Tools and Parts Included: It is an ideal tool for construction operators. Can be used for indoor cable stripping coating layer and positioning....
  • Portable & Travel: Light weight small size easy to operate Can be used for indoor cable stripping coating layer and positioning length It can be used....
  • We source our own fiber products for HDTV, SDI, and Analog MATV systems. your mission critical supplier for all Optical Fiber needs. FTTH optical....
Check Stock

Sewer Camera 165FT, 512Hz Transmitter Sonde for Pipe Location Endoscope Camera 7”LCD DVR Screen Plumbing Borescope Inspection Camera 12 LED IP68 Waterproof Lights(8GB SD Card) (Don's Include Receiver)

  • 512Hz Locator:The sewer Inspection camera features 512Hz Sonde Transmitter built-in the probe camera. Now it becomes easy to pinpoint the location of the probe with the 512Hz transmitter by using a 512Hz receiver (not include receiver). Save time and money and take advantage of this great feature..
  • Monitor with DVR:This sewer camera with sonde has a 7” LCD display and comes equip with DVR unit to allow you to record your videos and pictures. Our pipeline camera system also includes 8GB SD card for easy storage and ease of transferring to your computer..
  • Cable & Camera:Our sewer camera with locator comes with a 165ft pushrod reel of semi-rigid cable. The probe camera also comes with 12 LED lights that are adjustable and the camera has a waterproof rating of IP68. Please note cable is made of fiberglass and can not be bent less than 90 degrees..
  • Multi-functional Control Box:Our latest borescope cam with locator sonde has a control unit that allows you to control your recordings and pictures as well as have the ability to zoom in and add annotation to your pictures. You can also use an AV cable to connect it to other monitors as well. If the rechargeable battery runs out of power you can set the control unit to ON/AUX and connect it to the power ....
Check Stock

Sewer Camera, 512Hz Transmitter Sonde for Pipe Location Endoscope Camera 7”LCD DVR Screen Plumbing Borescope Inspection Camera 12 LED IP68 Waterproof Lights Drain Snake Cable (8GB SD Card) (30M)

  • 512Hz Locator:The sewer Inspection camera features 512Hz Sonde Transmitter built-in the probe camera. Now it becomes easy to pinpoint the location of the probe with the 512Hz transmitter by using a 512Hz receiver (not include receiver). Save time and money and take advantage of this great feature..
  • Wide Range of Compatibility: Our 512Hz sewer pipe locator receiver can be used in conjunction with your 512Hz sewer inspection camera with transmitter to help you quickly find where the problem lies in the depths, saving you valuable time. Not only is it easy to operate, but our analog receiver can be used with any transmitter that transmits 512Hz signals..
  • Monitor with DVR:This sewer camera with sonde has a 7” LCD display and comes equip with DVR unit to allow you to record your videos and pictures. Our pipeline camera system also includes 8GB SD card for easy storage and ease of transferring to your computer..
  • Cable & Camera:Our sewer camera with locator comes with a 100ft pushrod reel of semi-rigid cable. The probe camera also comes with 12 LED lights that are adjustable and the camera has a waterproof rating of IP68. Please note cable is made of fiberglass and can not be bent less than 90 degrees..
  • Rechargeable Battery:Our pipe pipeline insp....
Check Stock

ELEGRP Digital Dimmer Light Switch for 300W Dimmable LED/CFL Lights and 600W Incandescent/Halogen Single Pole/3-Way LED Slide Dimmer Light Switch Wall Plate Included UL Listed 6 Pack Matte White

  • ✅【 Single-Pole or 3-Way 】 Can be used in single-pole or 3-Way applications, where lights are controlled from one or two locations. Use only one dimmer in a 3-or-4-way circuit. The other 3-or-4-way switch(es) will turn the light on at the brightness level selected at the dimmer..
  • ✅【 Thoughtful Locator Light 】 Add an optional white locator light to easily find your dimmer switch in the dark.
  • By factory setting, the locator light is on when the light is switched off and off when the light is switched on.
  • The locator light could be switched off..
Check Stock