ReviewsWire Clamp

ABN Hose Clamp Plier 9-Piece Set – Universal Automotive Fuel Hose, Oil Hose, Water Hose Removal Pliers Remover Tool Kit

[Cohesive Plier Clamp Set]: ABN Hose Clamp Plier 9-Piece Set is a one stop shop for taking apart an engine or replacing fuel, oil, and water hoses.
Tools in the plyer kit squeeze together taking pressure off hose.
Tools can hold the locking tab of connector in an open position leaving your hands free to work elsewhere.
[Built to Last]: Corrosion-resistant nickel chromium steel.
Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
[Comfortable Grip]: Molded, rubberized handles for less user fatigue and more productivity.
Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
[Portable Storage]: Heavy-duty 18.6 x 3.5 x 10.9 inch (47.2 x 8.9 x 27.7cm) plastic blow-molded case with handle for easy transportation, safe storage, and quick organization.
[Package Contents]: Includes a single hose clamp pliers, swivel jaw band clip pliers, swivel jaw spring wire clip pliers, flat band hose clamp pliers, angled flat band hose clamp pliers, hose removal pliers, circle-R (clic-R) collar....

Check Stock

Auvotuis 10Pcs M2 Wire Rope Clip Cable Clamps 304 Stainless Steel Duplex Clamps Double Bolt Cable Clips Clamp Fastener for 1/16 Inch Diameter Wire Rope

Packaging & Size: 10Pcs M2 duplex wire rope clamps. Total size is 30 x 12 x 15mm/ 1.2 x 0.48 x 0.57inch. Ideal for securing 1/16 inch wire rope or rope fittings..
High Quality Material: Wire rope cable clamp is made of high quality 304 stainless steel material with polished surface, durable and corrosion resistant for long term use..
Duplex Clamp: Double post design for quick opening or closing. Screws and nuts are rolled with precision technology to tighten the rope and reduce nut slippage for greater stability and safety when using steel rope clamp..
Wide Application: 304 stainless steel rope clamp is suitable for marine applications, it can be used for attaching, anchoring, securing, tightening and making rings to adjust length, such as garage doors, cafe light strings, outdoor patio light strings, reins, saddles, harnesses, etc..
After-Sales Guarantee: We insist on the goal of winning your trust with high quality and service. If you have any quality problems after receiving the goods, please contact us in time and we will give you a satisfactory answer as soon as possible..

Check Stock

Hao Pro 1/16inch Width M2 Single Bolt Cable Clamp More Retention Hold Firm Easily Adjust Stainless Steel Simplex Wire Rope Clips 8 Pieces for String Lights Garage Electric Fence Connecting

Clamp tight:It can from a tight fit in the bracket.The point of retention is the friction from the wire going around the stud in the middle of the bracket.When the wire comes down the other side there's an additional point of friction.Tight enough to hold a wire when used for hanging a long wire that will support string lights..
Easy adjust:You can get two wires safely wound in the fitting and the base and nut then done up without it all coming apart.It will stay flat to help nudge the wires into place.Easy to make tension adjustments if you want to change different set ups.Simply run the wire through the base and tightening a washer and nut down on it..
Mini size:Their tiny size makes them very useful if you got cables on a garage door that you needed to clamp in an hard to reach area.These can work a charm and would work as well on any other type of smallish wire that you need to work with.Combine with small braided steel line to make hangers for things that needs to be hung up..
Stainless steel:Quality stainless steel prevent them from rusting over time,the metal is hard/stiff enough to lock into the wire.The metal casing is solid,the bolt threaded cleanly and the nut is less likely to round out during uses.Avoid having to knots on the ropes so ....

Check Stock

Ymkf Sqqr 60Pcs M3 Stainless Steel Wire Rope Cable Clip clamp M3 Stainless Steel Thimble M3 Aluminum Crimping Loop Sleeve for 1/8 inch Wire Rope Cable（3 Styles, 20PCS Each）

Wire rope accessory set - pack contains 20-Pcs wire rope cable clip/clamp(M3), 20-pcs thimble(M3), 20-pcs M3 aluminum crimping loop..
Corrosion resistant stainless steel made from 304 stainless steel wire rope clamps, corrosion resistance, long life span for maximum corrosion resistance and durability..
M3 stainless steel wire rope cable clip clamp.
M3 stainless steel thimble.M3 aluminum crimping loop sleeve Both of them are suitable for 1/8” wire rope..
Wide application - Suitable for tightening rope and regulate the elastic effect, good for steel wire, antenna, clothesline, chain, cable railing system, sun shade, globe string lights hanging and other rope etc..., perfect for both indoor and outdoor..
Insert both ends of the wire needed to be fixed, tighten both nuts till the it is secure enough for application..

Check Stock

Forney Easy Weld 261, 140 FC-i Welder, 120V, Green

... to weld mild steel up to 1/4 in plate.
PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire.
WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty.
PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A.
RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031).
Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.

Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

...asy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity.

Check Stock

9pc Hose Clamp Pliers, Hose Clamp Remover Kit with Flexible Wire Long Reach Hose Clamp Clic R Type Swivel Jaw and Flat Band Pliers for Automotive Coolant Radiator Heater and Water Hose

COMPLETE HOSE PLIERS SET: This universal 9-piece hose clamp pliers set from OMT includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines.
PERFECT FIT: Each pair of our well-engineered hose pliers works with hose clamps from 11/16 inch to 2-1/2 inches: the flexible hose clamp pliers, the swivel jaw band clip and spring wire clip pliers, and regular and angled flat band hose clamp pliers for spring-type clamps.
the Clic-R collar pliers for ear-type clamps.
and the hose removal pliers for most standard clamps.
LOCKING DESIGN: The user-friendly locking mechanisms of the 5 spring clamp-compatible pliers keep your clamps held open, freeing your hands and speeding your work.
DURABLE & COMFY: Our clamp pliers are constructed from durable structural steel, blackened to offer you maximum strength and corrosion resistance.
the easy-grip rubberized handles reduce fatigue during use.
and the sturdy blow-molded case keeps everything organized and portable.

Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

...ke for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Just make sure to connect the correct terminal for the correct polarity.

Check Stock

CEP/Marinco CS6365N 50-Amp 125/250V Twist Lock Male Plug Connectors 2-Pack

Glass-filled nylon- Tough and resistant to a wide range of chemicals.
Clamp-type terminals provide wire holding. Rivet less, one-piece contacts eliminate joint resistance.

Check Stock

BTSHUB Engine Timing Light Xenon Vehicle 12V Ignition Inductive Strobe Timing Light Tool Compatible for Car Motorcycle, Marine, Lawnmower

【Wide Applicatons】: Design to re-timing your car's ignition to get the best performance that you can. Suitable for car, vehicle motorcycle, marine, all two-stroke, and four-stroke gasoline engines, easily operate on 12V ignition systems.
【Professional Tool 】: Solid-state burnout-proof polarity with automotive reverse, it is polarity and overload protection. It`s sliding clamp-on inductive pick-up, for easy and safe hookup.
【Pistol Grip Design】: Handle pistol-type design conforms to the engineering design, the button is comfortable, feels good, facilitates the operation.
【Sensor Clips】: The sensor clip is red and black to distinguish positive and negative poles, easy to use, and more secure. And the color of the wire is also different to prevent the glue sleeve of the clip to come off and difficult to distinguish.
【 How to use】: (1) Switch off the engine of your car, (2) Clamp red clip to the positive terminal of the car battery, (3) Clamp black clip to the negative terminal of the car battery, (4) Connect the largest clip directly to the wire of #1 spark plug wire.

Check Stock

Bonsicoky 20Pcs M3 Stainless Steel Duplex Wire Rope Clips, Duplex Double Bolt Cable Clamp for 1/8 Inch Diameter Wire Cable

...NT - 20 Pcs M3 Double Bolt Wire Rope Clips for 1.5-3mm Diameter Wire Cable. They are necessary hardware for rigging, wires and cables. Suitable for industrial use, manufacturing, home renovation project, aquaculture and marine applications..
HIGH QUALITY - Bolted wire rope clamp is stamped from 304 stainless steel thick plate. It has high strength, strong rust resistance and strong load-bearing capacity, strong and durable, and can cope with harsh environments..
PRECISION DESIGN - Screws and nuts are rolled with precision technology to provide a higher level for the tightening of the wire, reduce the nut slipping, and be more stable and safe when using the bolt wire rope clamp..
DETAIL PROCESSING - Each Bolt Wire Rope Clip is polished, the surface is smooth, and the accuracy is higher. There is no burr to scratch the hand during installation, and it is helpful to reduce the wear and blockage of the wire..
90 Days Money Back Guarantee: We believe that Bonsicoky wins your trust with quality and service. If you have any quality problems, please contact us in time, we will give you a s....

Check Stock