ReviewsWire Coil Nails

Metabo HPT NV65AH2 Siding Nailer w/Air Hose

  • SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4".
  • SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch.
  • EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.
  • LIGHTWEIGHT: 40% lighter than PVC and is spiral reinforced for increased durability.
  • STRENGTH: Handles 300 PSI with a 3-to-1 burst ratio.
Check Stock

BOSTITCH Coil Siding Nailer, 1-1-1/4-Inch to 2-1/2-Inch (N66C)

  • The sliding nail gun drives wire weld and plastic inserted coil nails.
  • Adjustable depth guide of the siding nailer sets nails to desired depths quickly and conveniently.
  • The coil siding nailer has a lightweight aluminum design for durability.
  • Soft rubber foot helps to prevent damage to softer woods.
  • Tool-free adjustable exhaust conveniently directs exhaust away from the user.
  • Fastener Length: 1-1/4-inch - 2-1/2-inch.
  • Fastener Diameter: .080-inch - .092-inch.
Check Stock

BOSTITCH Coil Framing Nailer, Round Head, 1-1/2 to 3-1/4-Inch (N80CB-1)

  • AWARD: Rated the Pro Preferred Nailer for 9 years running (2014 - 2022) by Builder and Developer Magazine.
  • FASTENERS: Accepts 16º wire coil nails from 1-3/4" - 3" and 15º plastic coil nails from 1-3/4" - 2-1/4".
  • LIGHTWEIGHT: Only 5.7 lbs for easy maneuverability.
  • SELECTIVE ACTUATION: Allows for quick changes between sequential and contact nailing with the flip of a switch.
  • EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.
Check Stock

Metabo HPT Air Compressor (THE TANK™ 8-Gal) w/Siding Nailer

  • MORE PRESSURE: 225 PSI provides 38%* more usable air for more work and less run time.
  • 40% MORE* AIR FLOW: 5.0 CFM @ 90 PSI to operate more tools and provide air to the entire jobsite.
  • LIGHTWEIGHT: At only 93 lbs, you can get more work done with less weight.
  • SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4".
  • SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch.
  • EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.
Check Stock

Metabo HPT Coil Siding/Framing Nailer with Metabo HPT Siding Nails and Air Hose

  • Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT.
  • Accepts 16º wire coil nails from 1-3/4" - 3".
  • Same tools. New name. Hitachi power tools has renamed to Malabo HPT.
  • Brass couplers feature a standard 6-ball bearing design which provide longer coupler life and stronger connections.
  • Same fasteners. New name. Hitachi Power Tools has renamed to Metabo HPT.
  • Wire coil, full round head siding nail, 15 degree.
Check Stock

BHTOP CN83N Framing Coil Nailer, 2-Inch to 3-1/4-Inch Round Head Framing Coil Nail Gun, 16 Degree Magazine Tool-less Depth Adjustment with Safety Goggles

  • Powerful, rapid nailing performance, ergonomic design, well balanced.
  • extra heavy-duty, die-cast aluminum construction.
  • Drives 225-300 nails continuously by full-loading.
  • meite CN70B is one of the best sellers of industrial coil nailers in the China market.
  • [Compatible Fasteners] 15 Degree 1-3/4" to 2-3/4" (45-70 mm) length nails. Please note that CN70B does not come with nails.We have meite 15-degree wire coil stainless steel 2-3/8''x 0.113'' smooth siding nails, you can search for ASIN B01N5R1H1H in our store..
Check Stock

Hitachi 13369 2-1/2-Inch x 0.092-Inch Full Round-Head Ring Shank Hot-Dipped Galvanized Wire Coil Siding Nails, 3600-Pack

  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
  • Wire collated nails are used for rough nailing of lathing and sheathing materials.
  • Designed to use with Hitachi coil siding nailer models NV65AH and NV75AG.
  • Hot-dipped galvanized fiber cement material offers superior corrosion protection in all pressure treated lumber.
  • Measures 2-1/2 in. in length by 0.092 in. in diameter and comes in a 3,600 -pack.
  • Designed to use with Hitachi coil siding mailer models NV65AH and NV75AG.
Check Stock

Bostitch Cap Nailer Model N66BC-1

  • Tool free "Dial A Depth inches adjustment sets nails to desired depths quickly and conveniently.
  • Lightweight magnesium design for added durability. Operating Pressure:70 120 psi.
  • Quick load magazine feature provides fast and easy loading of caps and nailsDriving Power500 Inch pounds @ 100 psiFastener Range1 1/4 inch to 2 1/2 inch Wire Weld and Plastic Inserted Coil Nails (.080 inch .092 inch)Magazine Capacity300 Nails.
  • Tool free adjustable exhaust conveniently directs exhaust away from the user.
  • Cap method proves to be 10x faster than nailing by hand.
Check Stock

Fasco 11553F Siding Nailer

  • Rubber comfort grip ensures non-slip handling and reduces vibrations and fatigue.
  • Works both wire welded and plastic sheet collated coil nails.
  • Fully Pneumatic feeding and positioning system for precise nailing even at low pressures.
  • Adjustable work contacting Element, consistent depth of drive and control of Countersink.
Check Stock

Hitachi 13361 1-1/4-Inch x 0.092-Inch Full Round-Head Ring Shank Hot-Dipped Galvanized Wire Coil Siding Nails, 3600-Pack (Discontinued by the Manufacturer)

  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
  • Wire collated nails are used for rough nailing of lathing and sheathing materials.
  • Designed to use with Hitachi coil siding nailer models NV65AH and NV75AG.
  • Hot-dipped galvanized fiber cement material offers superior corrosion protection in all pressure treated lumber.
  • Measures 1-1/4 in. in length by 0.092 in. in diameter and comes in a 3,600 per pack.
  • Designed to use with Hitachi coil siding mailer models NV65AH and NV75AG.
Check Stock

BOSTITCH Coil Siding Nailer, 15-Degree (N75C-1)

  • The sliding nail gun is perfect for high-volume nailing of wall and roof sheathing.
  • The siding nailer drives 15 degree wire weld collated and plastic inserted nails with shank diameters of .090-inch - .131-inch.
  • The coil siding nailer has a lightweight aluminum design for durability.
  • Adjustable depth guide sets nails to desired depths quickly and conveniently.
Check Stock