ReviewsWire Cup Brush

HOYIN 6Piece Drill Wire Wheel Cup Brush Set,0.010in Coarse Crimped ,Thicken Face Width with1/4In Hex Shank

  • *Size:Wheel diameter: 3 in., 2-1/2 in., 2 in. and 1-1/2 in. (2),Cup diameter: 2 in..
  • *Clean virtually any surface quickly and easily with this abrasive finishing brush kit..
  • *The crimped wire cup brush is rigidly secured to a safety-designed cup-shaped metal holder for added durability and efficient use..
  • *These tough wire wheels are well-filled with crimped, untempered carbon steel wire. 0.010in bristle,which increases the strength of the steel wire. It has reasonable bending design of the curve and also increase the number and thickness of the bristles through the German original automatic production process to ensure that the wire will not quickly fall off during the operation of the brush wheel in the shortest time and works more smoothly..
  • Compared with the traditional manual production line, the thickness uniformity, perfect appearance,using stability and safety are greatly improved, and the face width of the tool is also more flexible..
Check Stock

6 Pcs Wire Wheel Cup Brush Set,1/4In Round Shank Wire Brush for Drill Attachment, for Cleaning Rust, Stripping and Abrasive

  • The Material of Wire Wheel Cup Brush: Made of carbon steel material. Designed with reasonable crimped wire curvature and increased bristle thickness to extend longer life, durable to use..
  • You will get 6-Piece Wire Brush Wheel & Cup Brush Set. Includes two 1-1/2.
Check Stock

TILAX 3 Inch Abrasive Wire Cup Brush Assorted Cup Brushes 3 Pcs, Nylon Cup Brush for Drill 1/4" Arbor, Grit 80# 120# 320# Cleaning Rust, Stripping and Abrasive, for Drill Attachment

  • DESIGNEDFOR EFFICIENT AND DELICATE REMOVAL: 3'' (75 mm) 1/4" nylon 1/4" cup brush set includes three grit sizes, red (80 grit) and gray (120 grit) are suitable for large-area quick rough grinding.
  • blue (240 grit) Suitable for finer surface treatment..
  • LONG LIFE & HIGH QUALITY: Our drill brush made of DuPont nylon yarn to ensure that there is no danger of breaking and flying out during high-speed and heavy-duty processing. The service life is 10 times that of steel wire..
  • SAFETY AND STABILITY: TILAX 3 Inch wire cup brush for drill are made of thickened steel, and the weight ratio has also been accurately calculated to ensure stability and safety, while greatly improving work efficiency. At the same time, the nylon thread can avoid piercing the skin during installation and use..
  • SUITABLE FOR GENTLE SURFACE TREATMENT: The wire cup brush for drill made of nylon, The nyalox drill brush can be used anywhere you can imagine and will not damage the details of the part. For example, metal, steel, stainless steel, wood, aluminum, plastic, PVC, ceramic tile, stone and other wet or dry applications are safe....
Check Stock

TILAX Wire Wheel Brush Cup Brush, Twisted Knotted Cup Brush for Grinders, 5/8 Inch-11 Threaded Arbor, 0.020 Inch x 3 Inch for Heavy Cleaning Rust, Stripping and Abrasive, for Angle Grinder

  • Safety And Stability: The external and internal fixing plates of the TILAX angle grinder wire cup brush is made of thickened steel and a large hexagonal thread of 10 strengths to avoid the occurrence of steel wire flying and breaking during heavy work, and the weight ratio is passed. Precise calculations provide excellent balance and stability..
  • High-Quality Carbon Steel Wire: Angle grinder grinding brush uses 0.020in high-strength hardened carbon steel wire has 4 times better performance than the others in the market, and has perfect knotting integrity. Compared with similar products, it has longer service life, safety, smoothness and ease of use. Eg, the wire will not be lost and bent even during intense use..
  • Increased Productivity And Grinding Efficiency: Twisted wire cup brush runs at speeds up to 12,500 RPM and is suitable for angle grinders with 5 / 8 in 11 NC threaded shank for easy and smooth removal of severe corrosion, rust, paint, spatter and scale, while cleaning the edges of the weld to remove burrs..
  • Rough Treatment For The Surface: It can be used for surface adhesion treatment before painting, spray coating and electroplating. It can also be used for surface paint peeling and grinding..
  • Can Handle a Variety Of Surfaces: Twist knot wire wh....
Check Stock

6 Pack Wire Wheels Brush, Rocaris 3 Inch Knotted and Plated Crimped and 1-Inch Carbon Knot Wire End Brush, Cup Wire Wheels Brush Set Perfect For Removal of Rust/Corrosion/Paint

  • PREMIUM WIRE CONSTRUCTION - Innovative spiral knotted wire construction for a narrow face and precision deburring, rust, spatter and paint removal, surface conditioning and preparation..
  • HIGH QUALITY brush wheel ---- Rocaris wire wheels brush Constructed with internal holding plate to ensure consistency and safety.
  • ATTACHES TO MOST POWER DRILLS - 1/4" Shank Hex quick change shanks are use in all Types of drills and die grinders 4500 Max RPM..
  • IDEAL FOR CLEANING & REMOVING DEBRIS - Often used to Polish & Clean Metal Surfaces. Also works well for Removing Rust, Paint, and Corrosion..
  • WHAT YOU GET — 2 Pack 3 Inch brass plated, 2 Pack crimped wire cup brush, 2 Pack knotted steel wire cup brush.
Check Stock

WENORA 7 Pack Abrasive Filament Nylon Wire Bristle Drill Wheel and Cup Brush Set - 1/4\ Hex Drill Shank - Remove Rust, Paint,Corrosion

  • A durable abrading brush with coarse abrasive grit embedded into the nylon brush strands, so it quickly and easily removes rust, corrosion, and also sands, scuffs, and deburrs metal, wood, plastic, and ceramic surfaces..
  • The ideal abrasive cup brush to use for cleaning and prepping surfaces for sprayable truck bed liner coatings. It quickly scuffs and strips metal surfaces with the abrasive nylon strands without causing any sparks that metal brushes do. It also leaves the surface with a fine enough scuff scratch that a primer or truck bed liner coating can go directly over it..
  • Nylon cup and wheels abrasive brushes mounted on 1/4 inch hex shanks, fits any drill or Impact drivers.
  • This brush is designed to be effective and will last many times longer than a wire brush. Because, as the brushes nylon strands wear down, they expose fresh embedded abrasive grit that continues to provide consistent clean and fast scuffing and rust removal..
  • WHAT YOU GET : 7 pieces nylon filament abrasive wire brush set including nylon end brush, nylon wheel brush, nylon cup brush..
Check Stock

Mayouko Wire Brush Set, 2PCS Heavy Duty Carbon Steel and Stainless Steel Wire Scratch Brush with 14' Curved Wood Handle Wire Brush for Rust Removing,Cleaning

  • 【Wide application】Wire wheel brush for drill are ideal for removing welding slag, rust, paint stains, clean steel parts, machinery, unfinished metal parts. Also great for cleaning threads, grills or tile..
  • 【High quality】Heavy duty and solidly imbedded carbon steel bristles and stainless steel wire cup brush for grinder are built to scrub the toughest of surfaces without failure..
  • 【Ergonomic design】Long curved, smooth finish, nice naturally beech wooden handle with pre-drilled hole for hanging provide convenience and comfortable feeling..
  • 【Perfect size】With the perfect size 14" Overall Length help you reach tough places. Bristles also help you reach every corner and crevice, suitable for cleaning tight areas.
  • 【Meet different needs】 Carbon steel abrasive cup brush（Black) for general rust, paint and slag removal, Stainless steel wire cup brush(Silver) for cleaning aluminum or stainless and Other hard surfaces..
Check Stock

4Pcs Nylon Filament Abrasive Wire Cup Brush Nylon End Brush Kit for Drill Rotary Tool with 1/4'' Shank

  • Maximum 4500 RPM ,Kit include :1 x 4 inch Circular Wheel Brush,1 x 2 inch Circular Wheel Brush,1 x 2 inch Wire Cup Brush,1 x 1 inch Wire End Brush.
  • Nylon cup and wheels abrasive Brushes mounted on 1/4 inch Hex shanks, Fits any drill or Impact Drivers.
  • Commonly used for prepping surfaces, deburring, light removal of paint and coatings.
  • This adaptable Nylon Brush is Ideal for cleaning delicate parts for Automotive, Metalwork, Woodworkers, Refurbishers and DIYs, with minimal worry about damage or scratches.
  • High durability, strong and tough brush, long service life, shorten polishing time and improve equipment efficiency.
Check Stock

Amazon Basics 3-Inch Crimped and Knotted Brush Set with 5/8 Inch 11 Threaded Arbor

  • Includes (1) 3-inch crimped wire cup brush and (1) 3-inch knotted wire cup brush.
  • Made of 100% steel wire with a copper-coated finish for reliable strength, efficiency, and long life.
  • Designed for use with 4-1/2- to 5-inch angle grinders at high speeds up to 12,500 RPM.
Check Stock

BAILUK Wire Wheel Cup Brush Set,0.012-Inch Coarse Crimped Carbon Steel,Die Grinder Wire Brush for Drill,1/4In Hex Shank,Wire Drill Brush Se (24 Pack)

  • 【Security And Stability】 Permanently attached 1/4" shank. Fits for all types of drill bits and mold grinding machines. Easy to control with variable speed drill. The crimped wire cup brush is rigidly secured to a safety-designed cup-shaped metal holder for added durability and efficient use. 6000 R.P.M MAX..
  • 【PACKAGE QUANTITY】Drill Bit Set 24 Pieces of Different Diameters - Including 4 inches (100 mm) * 1, 3 inches (75 mm) * 2, 1-1/2 inches (38 mm) * 6, 2-1/2 inches (63 mm) *2, 2 inch (50 mm) wire brush*6, Wire End Brush.
  • Cup Brushes: 1*2'' ,1*2-1/2inch, 1*3''. Pen-shape Brushes: 25mm* 1,16mm* 2,10mm* 1. The larger size is suitable for fast work on a large area, While the smaller size allows narrow space and fine work..
  • 【STRONG & EFFICIENT WIRE WHEEL】Instead of dealing with a hand-held wire brush, this wire wheel brushes set indeed does a good job removing rust and corrosion from small areas, corners, screw and bolt heads. Look like new. Also they can be fitted to a pillar drill in the workshop for a more permanent set up..
  • 【APPLICATION】Roughening,planing,deburring,edge honing,st....
Check Stock

3Pcs 3 Inch Assorted Cup Brushes Abrasive Wire Nylon Cup Brush for Drill,Grit 80 120 320 with 1/4\ Shank

  • These Nylon Cup Brushes Maintains shape & will not rust，Will not shed bristles under normal conditions..
  • Material: nylon composite grinding sand.So Nylon Bristle Brush safe to use than steel wire brushes, will not puncture skin..
  • Applications: Removing paints, corrosion, weld scale, surface rust & burns from metals.Can also be used for wood polishing and deburring.
  • These Nylon Cup Brushes with 1/4" shank fit most drill,Max RPM: 4,500.
  • 3 different grit of these abrasive brush to meet different grinding requirements.
  • Package include:1×Cup brush red-80#,1×Cup brush gray-120#,1×Cup brush blue-320#.
Check Stock