ReviewsWire Railing Parts

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock

Muzata 300ft 1/8\ Wire Rope T316 Stainless Steel Marine Grade for 1/8\ Cable Railing System Decking Aircraft Cable Hardware 7x7 Strands Indoor Outdoor DIY Balustrade Hanging WR02, WP1

  • ...more durable and sturdy than 1x19 strands, which can ensure long service life. The surface of the wire rope is smooth without rough edges and easy to handle. Recommend to use it with professional cable cutter Muzata CR12 to get clean cuts and reduce fraying.
  • Wide Applications- The wire rope is perfect for 1/8" cable railing systems, which will not block the view. It can also work well in hanging string lights, clothes, photos, or decorations in your bedrooms, patios, gardens, pergolas, etc. Suitable for DIY designs, commercial activities, wedding celebrations, and festival occasions.
  • Pre-Designed System- We pre-designed a cable railing system named MetalBudget especially with 5/32" swage threaded stud Tensioner Muzata CR43, post Muzata PS01,handrail Muzata HT10, hydraulic crimper CT01, cable cutter MUZATA CR03, protector sleeve MUZATA CB29, 5/32" wire rope MUZATA WR04. (Please note that the package only contains contents as specified in bullet point 1. Other stuff mentioned is not included).
  • Why Choose Us- MUZATA is a leading cable railing manufacturer offering premium products at competitive prices. Over years of research, MUZATA products have been proven by markets to be high-quality, safe, and reliable. We strive to provide our global customers....
Check Stock

Steel DN Mate 60 Pack T316 Stainless Steel Left&Right Handed Thread Swage Lag Screws for Wood Post of 1/8' Deck Railing Kit, Cable Railing/Stair Deck Railing, DIY Hardware Kit, Wrench Included DM60

  • New deck railing design, clean and elegant. This cable railing kit includes 30 pcs left, 30pcs right hand thread lag screws, 1 patent design wrench, and 2 drill bits. Stainless Steel T316 material, anti-rust ,water and corrosion, marine Grade, good for indoor or outdoor usage. With our new made wrench, installation becomes much easier..
  • This deck railing hardware fit 1/8″ OD cable of railing system. The thread screws are designed for timber/wood post. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Products without Left & right will bring you hassle and might damage the cable..
  • Length of cable should be 1-1/2″ shorter than wood surface distance(as shown in pic.4).
  • if you want to DIY a high quality cable railing system, standard 1/8″ (OD) cable which was made of T316-stainless steel is recommended. Please search on amazon” B0B71J2DXD” if you need black lag screws..
  • By the design of Right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. And this cable railing won’t be easily unfixed or destroyeded..
  • The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle ....
Check Stock

Muzata 10Set 1/8" Cable Railing Kit Hardware Turnbuckle M5 Eye to Eye CK01 and 165Ft Wire Rope WR01 and CR12 for Wood Post Stainless Steel Angle Adjustable WoodLoft System 10 Cable Lines,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 10pcs M5 eye to eye turnbuckle,20pcs thimbles,20pcs eye straps,20pcs aluminum sleeves,40pcs screws,1pcs cable cutter,330ft wire rope. This set can build 10 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a ....
Check Stock

Muzata Cable Cutter Wire Rope Heavy Duty Stainless Steel Aircraft Up to 5/32\ for Deck Stair Railing Strong Thick Seal Metal Fence Bike Bicycle Brake Cutter CR12, CT1

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY contains contents a....
Check Stock

Muzata 165ft Crystal Vinyl Coated Wire Rope 3/16\ Thru 1/4\ for 3/16\ Cable Railing System Galvanized Steel Cable 7x7 Strand Indoor Outdoor Decking Stair Balustrade DIY WR20 WP1

  • Cable railing kit product of Hong Kong company,it fits for 1/8 inch cable railing system. Made of US AISI standard 316 stainless steel for maximum corrosion resistance, durability and tensile strength.It can be used indoor and outdoor..
  • This cable railing hardware will make your cable railing more beautiful beacuse no need extra screws to install and no need turnbuckle to tension the cable..
  • This left & right hand thread design,It will rotate wire rope to the same direction and tighten the cable , Which also resolves the problem of twisting the wire rope (The fig.3 is key step of installation,It will help your installation easier and more beautiful)..
  • This cable railing kit include 40 pcs left and 40 pcs right thread lag screws ,1 pcs special drill bit ,1 pcs special wrench.
Check Stock

Toriexon 4 Steps Outdoor Stair Railing, Adjustable Handrail Chic White, Handrails for Outdoor Steps, Mattle Wrought Iron Handrail Stair Rail with Installation Kit for Concrete, Wooden Stairs

  • .../8" stainless steel wire rope, 1pc cable cutter. The blade of the cable cutter is quite sharp and durable that can make precise and clean cuts without fraying or smashing the cable ends. The safety lock prevents accidental opens and cuts that might hurt you.
  • Wide Applications- The wire rope is perfect for 1/8" cable railing systems, which will not block the view. It can also work well in hanging string lights, clothes, photos, or decorations in your bedrooms, patios, gardens, pergolas, etc. Suitable for DIY designs, commercial activities, wedding celebrations, and festival occasions.
  • Pre-Designed System- We pre-designed a WoodEasy cable railing system to help you construct an beginner-friendly wood system. It includes 1/8" toggle turnbuckle MUZATA CK07, level and angled protector sleeve (CR13-level,CR68-30°), 1/8" wire rope WR01, hydraulic crimper with cable cutter CK12, drill guide(CT09-30°). Check Pic-6 to find how to download the "User Guide" about the railing system or scroll down to "Product Description" for further details.
  • Why Choose Us- MUZATA is a leading cable railing manufacturer offering premium products at competitive prices. Over years of research, MUZATA products have been proven by markets to be high-quality, safe, and reliable. We st....
Check Stock

Hakko CHP TRR-58-G Macro Soft Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 14mm Jaw Length, Wide Head, 10 Gauge Maximum Cutting Capacity

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY contains contents a....
Check Stock

Muzata Cable Cutter Wire Rope 2022 Upgraded Version Up to 5/32\ Heavy Duty Stainless Steel Deck Stair Railing Aircraft Strong Thick Seal Metal Fence Bike Bicycle Brake Cutter CT15, CT1

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of Chrome Vanadium (CR-V) steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, protector sleeve CR67, stainless steel cable WR17, cable cutter CT15, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY conta....
Check Stock

AMAGABELI GARDEN & HOME Hardware Cloth 36inch x 50ft 2\X4\ Galvanized Before Welding Square Openings 15 Gauge Wire Mesh Fence Roll for Garden Fencing Deer Sheep Animal Enclosure BG304

  • ...9 structure, making it much easier to turn and bend at corners. The surface of the wire rope is smooth without rough edges and easy to handle. Recommend to use it with professional cable cutter Muzata CR12 to get clean cuts and reduce fraying.
  • Wide Applications- The wire rope is perfect for 1/8" black interior cable railing systems. It can also work well in hanging string lights, photos, or indoor decorations. Suitable for DIY designs, commercial activities, wedding celebrations, and festival occasions.
  • Pre-Designed System-To help you construct a black cable railing system, we pre-designed a NeatBlack system with 1/8" swage lag screw Muzata CK17 black, hydraulic crimper and cable cutter MUZATA CK12, drill guide MUZATA CT09, adhesive washer Muzata CR67, black level protector sleeve Muzata CR13, black wire rope MUZATA WR19. (Please note that the package only contains contents as specified in bullet point 1. Other stuff mentioned is not included).
  • Why Choose Us - MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation should be easy and affordable. So we work with every effort to provide quality products and professional service, to make Muzata a reliable brand. Need professional one-s....
Check Stock

Muzata Cable Cutter Wire Rope Heavy Duty Stainless Steel Aircraft Up to 5/32 for Deck Stair Railing Strong Thick Seal Metal Fencing Bike Bicycle Brake Cutter with 6Pcs Ferrules CR12 CT1

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter, 6pcs ferrules.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY cont....
Check Stock