ReviewsWire Rope Tensioning Tool

CREWORKS Automatic Wire Stripping Machine for 0.06\-1\ Copper Wires, Motorized Wire Stripper Tool for 7/0-15 AWG Scrap Electrical Wire Recycling, Electrical Tool for DIY Cable Copper Wire Stripping

  • Wire Stripper and Crimper 2-Piece Tool Kit includes everything a tradesman needs for insulated terminal crimping, wire stripping and cutting.
  • Ratcheting Crimper (Cat No. 3005CR) crimps only insulated terminals onto 10-22 AWG stranded copper wire.
  • Adjustable compound action design puts more crimping power into each squeeze.
  • Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) insulated terminals.
  • Wire Stripper and Cutter (Cat. No. 11061) with stripping head that adjusts to strip: 10-20 AWG solid, 12-22 AWG stranded, and 12/2 and 14/2 Romex cable (all sizes) and other nonmetallic (type NM) sheathed cable self adjusts.
  • Adjustable stopper to control the length of the core strip.
  • Tensioning thumb wheel allows for precise stripping of smaller gauge wire.
Check Stock

NEWTRY Hydraulic Cable Cutter Hydraulic Rebar Cutter φ25/32” Steel Wire Cutter 60KN Bolt Cutter for Copper Aluminum Cable, Armoured Cable, ACSR, Wire Rope, Steel Strand Wire, Aluminum Wire

  • ▷[HIGH CARBON ALLOY STEEL BLADE]---The Hydraulic Cable Cutter adopt high carbon alloy steel blade, high strength, and is specially used to cut copper aluminum wire and steel core aluminum stranded wire. Hook-type Knife Head is easy to open and close, and can be placed in any position. The blade can be replaced by opening the knife edge. The ASIN of the replacement blade: B07NMS6FQ5..
  • ▷[180°ROTATABLE HEAD & 360°FLEXIBLE USE]---The head of the industrial wire shear scissor can be rotated 180 degrees to facilitate adjustment of the working angle. It can also be operated in 360°, which is especially suitable for use in unfounded places and high-altitude projects..
  • ▷[ERGONOMICALLY DESIGNED INSULATED HANDLE+SAFETY VALVE SWITCH]---The handle of this hydraulic wire cutting tool uses a ring-shaped rubber handle to increase friction and provide a comfortable grip.Tighten (ON) when pressurizing and turn off (OFF) when releasing pressure, which is more safe and convenient..
  • ▷[SHEAR RAGNE & WIDE RANGE OF APPLICAITONS]---This Hand Crimper Tool can be used to cut copper aluminum cable,armoured cable, ACSR, wire rope, steel strand wire, copper wire,aluminum wire, steel rope,etc. But NOT SUITABLE FOR submarine cable, screw-thread rebar, iron chain or aircraf....
Check Stock

Greenworks Pro 80V 10 inch Brushless Cordless Polesaw Tool Only PS80L00

  • 10'' CHAIN AND BAR : high performance for quick cutting ¼'' Chain and up to 83 cuts per charge.
  • TRUBRUSHLESS MOTOR TECHNOLOGY : 2 x more torque. Provides more power, longer runtime, quiet operation, and extended motor life.
  • AUTOMATIC OILER : delivers proper chain lubrication and increased productivity.
  • TOOL-LESS CHAIN TENSIONING : for easy bar and chain maintenance.
  • EASY TO USE : push button start, no gas or fumes, no carburetor, no spark plug, and no starter rope.
Check Stock

Espalar Surface Mounted Heavy Duty Universal Espalier/Trellis Kit for Climbing Plants, Vines and greenwalls (Wire Included).

  • Everything you need, just supply own poles, electric drill, wire cutters and rivet gun. If you are fixing to masonry/brick walls a masonry drill bit and nylon plugs will be required.
  • Adorn fences & walls with climbing greenery.
  • Heavy duty wire 316 stainless steel – high tension / heavy loading. Unique tensioning system allows re-tensioning if wire becomes slack.
  • Number of Components: Anchors in capsules: 4 Anchor Platforms: 4 Hex head screws: (25mm) 8 Radial Wire Guides: 10 Hex Screws (40mm): 20 Tension Cap: 2 End Cap: 2 Wire in m (spooled) : 30m of 2mm ‘316’ wire.
Check Stock

Glarks Up To 2.2mm Wire Rope Crimping Tool With 150Pcs 3 Size Aluminum Double Barrel Ferrule Crimping Loop Sleeve Kit

  • 1. Product Type: High precision wire rope crimping tool with Aluminum double barrel ferrule crimping loop sleeve kit.
  • 2. Product Material: Crimping tool was made of heavy duty stainless steel, hard and sturdy.
  • 3. Package Include: 3 Size 150Pcs double barrel ferrule with a crimping tool in a Square paper box.
  • 4. Product Feature: Crimping tool With non-slip grips and self locking mechanism design makes it more relax to provide optimum pressure.
  • 5. Application: Crimping tool coordinate with barrel ferrule can be widely used for wire rope, cable line dog leashes and etc.
Check Stock

LORADAR 6.5Feet 200lb Fishing Coiled Lanyard Stainless Steel Inside Heavy Duty Fishing Safety Rope Extension Cord Tether for Deep Sea Fishing Tools Rod Kayak Paddles (Orange, 6.5ft)

  • Safety retractable lanyard, tool lanyards safety,coiled lanyard fishing, Maximum tensile length 6.5ft (2m) diameter 5.0mm (built-in steel wire diameter 2.0mm) can withstand 200lb. Steel wires covered with TPU, heavy duty and recovers well after stretching.Fishing safety rope wire is applicable for outdoor recreation, not only fishing, but also hiking, camping and hunting..
  • Fly fishing retractable lanyard, kayak fishing pliers, kayak lanyard, pliers with lanyard, rod tether, rope tools,bungee paddle leash. Stainless steel Locking Carabiners,which are Anti-rust, anti-corrosion,and it is rotatble within 360°.this Heavy Duty Coil Lanyard are wrapped in thigh quality TPU material,sof and flexible,which is more elastic and tougher than PVC,do not hurt your hand,and more durable.
  • Fishing line tool, fishing pliers lanyard, fishing retractable lanyard, lanyards for fishing, fishing rod leash kayak.the aluminum carabiner with spring-loaded and interlocking wire gate allows for easy single-handed use, more convenient and sturdy enough,and very easy to replace.It is ideal for fishing rods, fishing pliers, fishing grips..
  • Boating lanyard, boating tools, carabiner tether, coil tether,fishing pliers, coiled tether, paddle leash safety rod,kayak paddle tether. Fishing....
Check Stock

Felco C9 Wire Cutter

  • Outstanding powerful tool for cutting steel wire rope.
Check Stock

Crimping Tool, Wire Rope Crimping Tool, Up To 2.2mm Swager Crimper Fishing Wire Crimping Tool with 100 PCS Aluminum Double Barrel Ferrule Crimping Loop Sleeves Kit with Cutting Function for Cable

  • 【Premium Quality】- The wire crimping tool was made of heavy-duty stainless steel, which is corrosion and rust resistance. 4 positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm, It can easily crimp copper/aluminum sleeve and more from 50-450 lb test line..
  • 【Special-Purpose】- Cable crimper tool With non-slip grips and self-locking. The safety lock is an easy way to keep your crimper closed when you don't use it. And the mechanism design makes it more relaxing to provide optimum pressure..
  • 【Wide Application】- Crimping tool kit comes with 2 hardened steel side cutters, which can help you cut the wire without frays and the strong spring opens the cutters instead by your hands. Coordinate with aluminum double-barrel ferrule crimping loop sleeve can be widely used for wire rope..
  • 【Package Included】- High precision wire rope crimping tool with a 100Pcs Aluminum double-barrel ferrule crimping loop sleeve kit..
  • 【Pay Attention to】- ❶ The crimping tool can only be crimped to aluminum sleeves of 3/32" and below. ❷ The cutting section can only cut wire ropes 1/16" and below..
Check Stock

WORKPRO Bucket Tool Organizer and 8\ Mini Bolt Cutter

  • Package 1: WORKPRO Bucket Tool Organizer - Waterproof, tear proof & durable tool bag made from high quality 600D Polyester - 33lb load capacity for all your ‘must have’ tools.
  • Package 2: WORKPRO 8" Mini Bolt Cutter - 3/32-inch (Steel wire), 13/64-inch (Iron wire), 15/64-inch (Copper wire), 15/64-inch (Wire rope).
Check Stock

Powerworks 8-Inch 60V Cordless Brushed Pole Saw, 2.0Ah Battery and Charger Included, Power Electric Pole Saw PWPS60B410

  • A8" CHAIN AND BAR : great performance for quick cutting with 60V high power.
  • TOOL-LESS CHAIN TENSIONING : for easy and quick tightening of the chain.
  • EASY TO USE : push button start, no gas or fumes, no carburetor, no spark plug, and no starter rope.
  • AUTOMATIC OILER : delivers proper chain lubrication and increased productivity.
Check Stock

'More Power Puller' #2-30 2-Ton Puller w/Steel Cable 5/16\ (Hooks, 30')

  • ...h. REEL (DRUM FOR CABLE - Welded steel, Double sided teeth for safety. PAWLS (DOGS) - Ductile iron, Double sided for safety, Spring loaded interlocking pawl system. YOKE - Ductile iron, Ribbed for addded strenth. HOOKS - Frame hook & end hook are forged steel, Tackle block hook is a steel investment casting. CABLE (WIRE ROPE) - Extra heavy duty flexible core wire rope, 5/16" 6x37 (222 strand)..
  • INCLUDES: Main unit with cable (wire rope), 3 hooks (Frame hook, end hook, and tackle block hook), Safety handle (18"), and Two-in-one-unit - Removable tackle block hook allows easy switching from double line to single line capacity. OPTIONAL ITEMS: Extension handle (18" -inserts in standard safety handle), Safety latches on all 3 hook (Option SLT)..
  • DIMENSIONS: 17" length x 6" width x 8" height. WARRANTY All models include a two-year limited warranty. SAFETY: safety handle will bend when the rated capacity of puller is exceeded.
  • Solid one-piece iron components made in USA.
  • Trouble free on one notch at a time let down - up to 4 notches on a light load.
  • Tried and true, tested design since 1934..
  • CAPACITY Dead Lift Rating (double line): 2 ton (4,000 lbs.....
Check Stock