ReviewsWire Spiral Hose

Apache 98108493 1\ x 15' Biofuel Farm Transfer Hose Assembly

  • Hose assembly for transferring gasoline, biodiesel B10 and B20, E85, diesel, kerosene, or oil.
  • Nitrile synthetic rubber tube and cover for resistance to oil, solvents, abrasion, and weathering.
  • Spiral synthetic yarn reinforcement for strength, with static wire for static dissipation, recommended for electric pumps.
  • 8" internal strain relief springs on each end to prevent kinking at the coupling.
  • Two factory-installed 3/4" male NPT fittings for attaching to couplings or equipment.
Check Stock

Ventifan 4inch Dryer Vent Hose Flexible Aluminum Foil Air Ducting for HVAC Ventilation Fan ,Grey

  • [Flexible Material]- The Dryer Hose is made of 2 layers of aluminum foil and a built-in corrosion-resistant steel wire spiral, The PVC film help to be light-proof and noise reduction..
  • [High Temp Resistant]- Dryer exhaust hose fire, no harmful gas release at high temperature. Forms a tight seal to direct fumes and humidity safely away from living spaces. The temperature endurance range is -22 - 302 F. (-30°C - 150°C)..
  • [Wide Application]- Flexible ducting is applicable for HVAC, clothes dryer, kitchen exhaust fan, grow tent, green room, hydroponic system, It can also be used to cool closets, racks, and cabinets..
  • [Easy to Install]- The dryer vent hose can be cut to the required length, the air ducting is flexible to bend at any angle,very convenient..
  • 6 inch x 25 feet. 4 inch, This dryer duct is 8 feet long when fully extended, and the ducting can bend freely. It only takes up a little space when not in use due to the flexible length of the inline fan.
Check Stock

Metabo HPT NV65AH2 Siding Nailer w/Air Hose

  • SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4".
  • SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch.
  • EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.
  • LIGHTWEIGHT: 40% lighter than PVC and is spiral reinforced for increased durability.
  • STRENGTH: Handles 300 PSI with a 3-to-1 burst ratio.
Check Stock

Ventifan Vent Hose Flexible Aluminum Foil Air Ducting for HVAC Ventilation Fan,Black (6 Inch 8ft)

  • [Flexible Material]- The Dryer Hose is made of 2 layers of aluminum foil and a built-in corrosion-resistant steel wire spiral, The PVC film help to be light-proof and noise reduction..
  • [High Temp Resistant]- Dryer exhaust hose fire, no harmful gas release at high temperature. Forms a tight seal to direct fumes and humidity safely away from living spaces. The temperature endurance range is -22 - 302 F. (-30°C - 150°C)..
  • [Wide Application]- Flexible ducting is applicable for HVAC, clothes dryer, kitchen exhaust fan, grow tent, green room, hydroponic system, It can also be used to cool closets, racks, and cabinets..
  • [Easy to Install]- The dryer vent hose can be cut to the required length, the air ducting is flexible to bend at any angle,very convenient..
  • 6 inch x 25 feet. 4 inch, This dryer duct is 8 feet long when fully extended, and the ducting can bend freely. It only takes up a little space when not in use due to the flexible length of the inline fan..
Check Stock

Ventifan Dryer Vent Hose Flexible Aluminum Foil Air Ducting for HVAC Ventilation Fan,Black (4 Inch 8ft)

  • [Flexible Material]- The Dryer Hose is made of 2 layers of aluminum foil and a built-in corrosion-resistant steel wire spiral, The PVC film help to be light-proof and noise reduction..
  • [High Temp Resistant]- Dryer exhaust hose fire, no harmful gas release at high temperature. Forms a tight seal to direct fumes and humidity safely away from living spaces. The temperature endurance range is -22 - 302 F. (-30°C - 150°C)..
  • [Wide Application]- Flexible ducting is applicable for HVAC, clothes dryer, kitchen exhaust fan, grow tent, green room, hydroponic system, It can also be used to cool closets, racks, and cabinets..
  • [Easy to Install]- The dryer vent hose can be cut to the required length, the air ducting is flexible to bend at any angle,very convenient..
  • 6 inch x 25 feet. 4 inch, This dryer duct is 8 feet long when fully extended, and the ducting can bend freely. It only takes up a little space when not in use due to the flexible length of the inline fan..
Check Stock

Drasum Dryer Vent Hose 6 Inch Ducting Insulated 14 FT Air Duct with 2 Clamps – 4 Layer PVC and Aluminum Flexible Duct for HVAC Ventilation

  • 【 Easy Installation 】The two ends of 6 inch dryer vent hose have 25MM slices for easy connection with fans and accessories, with 2 clamps for fixing.
  • 【 Four Layer 】Steel-wire spiral structure, two layers of aluminum foil ducting wrapped with a layer of black PVC and a layer of PET film outside. Makes the 6 inch duct more durable and resistant to leaks.
  • 【 Thermal Endurance 】portable ac hose temperature endurance range from -22 - 302°F. (-30℃ - 150℃).
  • 【 Wide Applications 】Designed for ventilation applications, including HVAC, dryers, Kitchens, bathrooms, grow rooms and tents, greenhouses, etc..
  • 【 Adjustable Length 】Ducting Size: 6” | Length: 14 feet | Could cut the length according to your needs.
Check Stock

Drasum Dryer Vent Hose 4 Inch Ducting Insulated 6.56 FT Air Duct with 2 Clamps – 4 Layer PVC and Aluminum Flexible Duct for HVAC Ventilation

  • [Easy Installation] The two ends of 4 inch dryer vent hose have 25MM slices for easy connection with fans and accessories, with 2 clamps for fixing.
  • [ Four layer ] Steel-wire spiral structure, two layers of aluminum foil ducting wrapped with a layer of black PVC and a layer of PET film outside. Makes the 4 inch duct more durable and resistant to leaks.
  • [Thermal endurance] Dryer hose temperature endurance range from -22 - 302°F. (-30℃ - 150℃).
  • [Wide Applications] Designed for ventilation applications, including HVAC, dryers, Kitchens, bathrooms, grow rooms and tents, greenhouses, etc..
  • [Adjustable Length] Ducting Size: 4” | Length: 6.56 feet | Could cut the length according to your needs.
Check Stock

TunaMax Extractor Tool Hand Wand with Clear Head for Upholstery & Carpet Cleaning, Car Detailing Vacuum Wand for Portable Extractors & Truckmounts | Turn Shop Vac into an Extractor (CUS04)

  • *【Diy a Powerful Extractor】 If you are considering buying a professional extractor, it will be a good substitute. You can therefore save the expensive cost of a pro extractor. Our Extractor Hand Wand can be used as a replacement for many Extractor heads.
  • More importantly, it can turn your wet/dry vacuum into an extractor.
  • *【Two Adapters for Your Choices】 Large size adapter A fits 1-7/8" spiral-wound hose.
  • Small size adapter B fits 1-1/4" spiral-wound hose.
  • *【 Transparent Head Design】The 3.5" width clear head design allows you to see the dirt and impurities being cleaned, and directly see the entire cleaning process and effect in real time.
  • *【Stainless Steel Tube】Standard stainless steel 1.5" vacuum tubing is compatible with portable extractor and truck mount and most carpet cleaning system.
  • *【Attention】Please kindly noted the two adapters are with threads inside, could only connect spiral wound hose directly. Please make sure the hose termination could be taken off before order.
Check Stock

Northlight 18ft x 1.25in Blow- PE In-Ground Swimming Pool Vacuum Hose with Swivel Cuff

  • Heavy duty pool vacuum hose features leak-proof swivel cuff to prevent air from entering or exiting the hose, ensuring maximum vacuum suction while staying afloat for easy pool cleaning.
  • Swivel-cuff provides kink-free maneuverability and is made from a proprietary blend of materials for superior tensile strength and crush-resistant pool hose operation.
  • Resistant to damaging sun and pool water for product longevity.
  • spiral wound construction provides hose strength, flexibility, and maximum water flow efficiency.
  • Two-layer construction is spiral wound together in air tight interlocking design and is abrasion and crush resistant.
  • Made in USA and measures 1 1/2-inches x 50-feet.
Check Stock

13FT Washing Machine Drain Hose Extension, Full 12ft Long when Using the Hanger Bracket, Washing Machine Discharge Hose, Laundry Discharge Hose, Clothes Washer Drain Hose, Cratehill

  • ...is extra long washing machine drain hose has a flared and stepped end for snug connection to your clothes washer outlet. Will fit:.
  • ✅ PREMIUM QUALITY, the 13 foot extended hose length allows you to easily reach sinks and drains, the hose has a smooth interior for great flow and a spiral ribbed exterior for strength, material is extra long life tough PVC.
  • ✅ EASY INSTALLATION, HOSE CLAMP INCLUDED – Easily trim the flared end of the discharge outlet hose to the correct size for your washer with scissors or a sharp knife. Then just slip it onto your washing machine outlet, tighten the clamp and start your wash, a thick stainless steel hose clamp is included for a leak-free connection to your washing machine drain hose outlet.
  • ✅ MOVABLE HOOK HANGER, drainage hanger is clipped on and can be moved anywhere on the long hose for the perfect fit, this keeps the hose firmly planted in your drain.
  • NO LEAKING AND NO SLIPPING, when using the hook hanger the discharge hose is firmly gripped and allows precise alignment with the drain to ensure no water splashes.
  • ✅ TOUGH AND FLEXIBLE, industrial grade material contains a spiral reinforcement to prevent the hose from being kinked easily and stopping the flow of was....
Check Stock

2Pcs Garden Hose Coil Spring Protector Faucet Hoses Coupling Adapter

  • Include 2 pieces hose protector guards. Length is approx 5.7″(14.5cm).
  • Easily protect your garden hose with this spiral hose protector..
  • Eliminates hose crimping at the faucet, easy Gripper for effortless attachment.
  • Hose swivel end easily attaches to a garden hose.
  • Works with any standard 3/4″ thread water hose spigot.
Check Stock