ReviewsWire Trailer Cable

50 Pcs Trailer Frame Wire Clips Stainless Steel Clips Metal Cable Clips 22.5 mm/ 0.89 Inch Solar Panel Wire Clip Double Wire Trailer Wire Clips Wire Clamps for PV Wiring Boat Cable, Boat Trailer

  • Abundant in quantity: the package comes with 50 pieces of trailer wire clips, can be widely applied in your daily life, sufficient for your using demands.
  • With such a large quantity, you can also share the wire clips for trailer with your family members or friends generously, bringing them lots of convenience.
  • Reliable workmanship for lasting service: made of quality stainless steel, the double wire stainless steel clips are sturdy in structure, well polished with no pointed edges, hardly fading or rusting.
  • Moreover, the wire clamps for electric wires adopt barbed and curved design, can hold 2 wires tightly and neatly at the same time, not easy to falling off, keeping the wires from tangling.
  • Compact and portable: the trailer clips are designed with a total length of approx. 22.5 mm/ 0.89 inches, convenient for you to store them and carry around.
  • The applicable cable diameter of the trailer light clips ranges from approx.6 mm/ 0.24 inches to approx. 6.5 mm/ 0.26 inches, can be applied to panels that are approx. 1.3 mm/ 0.05 inches to approx. 2.5 mm/ 0.1 inches in width.
  • Convenient to apply: you can finish installing the wire panel clips in a few seconds, just clip them on targeted positions by hand, no tools or instructions needed, not occupying too muc....
Check Stock

SUZCO 25 Foot 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit 4-Way Plug 4 Pin 21 Male & 4 Female Extension Connector & Wishbone-Style with 18 Gauge White Ground Wire with SAE J1128

  • 【ITEM TYPE】This is a 21ft male & 4 ft female 4-flat marine trailer wiring harness with 4-way conductors and a 2ft white ground wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. The 4 flat trailer wire is color-coded and bonded wire to easily splice into your trailer's wiring system, no need for splicing wires. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【EXTENSION INCLUDING】This 25foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an COPPER trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion resistant terminal..
Check Stock

SUZCO 36 Ft 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit, Custom-Made 28' Male & 8' Female with 4' White Ground Wire, 4-Way Plug 4 Pin Male & Female Extension & Wishbone-Style & SAE J1128

  • 【ITEM TYPE】This is our SUZCO custom-made vehicle-specific 36FT male & female 4-flat marine trailer wiring harness with 4-way conductors and a 4' white ground wire, it fits for longer trailers and for customers desiring to wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【36' EXTENSION INCLUDING】This 36foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an aluminum trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with a 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion-resistant terminal..
  • 【4-WAY CONNECTORS & FITMENT】You can inst....
Check Stock

X AUTOHAUX 4.5ft 7 Way Round to 4 Way Pin Flat Trailer Coiled Wiring Harness Connector Adapter Plug

  • Adapts a 7 way trailer hitch used for RV and boat towing to a 4 or 5 flat connection..
  • Coiled cable stretches at least 4.5ft long, which provides sufficient space for towing vehicle and trailer..
  • With the function of connecting running lights, left turn and brake signal, right turn and brake signal. Plated terminals, abrasion resistant. The coiled cable makes it more durable than others..
  • Compact design between the wire and plug, well protect the adapter from the dust and water, for long service life..
  • Easy installation and plug in use, fit for most boat, trailer and RV towing..
Check Stock

Weather Pack 6 PIN Connectors 5 Sets 12-16 AWG used for cars, trucks, motorcycle, boat, trailer, marine, jetski (6 PIN)

  • Each kit includes: 5 pcs male connector housing, 5 pcs female connector housing, 30 pcs male terminals, 30 pcs female terminals, 60 pcs silicon rubber cable seals..
  • Waterproof electric wire cable connector plug, design for 12-16 AWG wire..
  • Waterproof cable connector, not be affected by water, dirt, fog, or other chemicals, convenient to use..
  • Ideal for car, truck, boat, motorcycle, trailer lighting systems, marine, jet ski, and other wire connection..
  • 6 PIN connector Kit Weather Pack Connectors.
Check Stock

Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Tail Stop Amber Turn Signal License Plate Light on 12V RV Pickup Trucks Marine Boats Trailers, 2 Year Warranty (5 Wire System)

  • ... systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation..
  • Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights.
  • Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc..
  • Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety....
Check Stock

GearIT 14/2 Speaker Wire 100 Feet 14 Gauge Copper Clad Aluminum - Fire Safety in Wall Rated Audio Speaker Wire Cable / CL2 Rated / 2 Conductors - CCA 100ft

  • 14 GAUGE IN WALL SPEAKER WIRE - GearIT Speaker Cable copper wires come in 2 conductor stranded copper wire designs. Suitable for in wall, in ceiling,....
  • COPPER CLAD ALUMINUM WIRE (CCA) - Solid bulk speaker wires made of CCA are copper clad wire construction for high quality sound. GearIT CCA Speaker....
  • SURROUND SOUND SPEAKER WIRE SETUP - Our thick copper wire and speaker wires are perfect for most in wall home theater sound system setup, subwoofer,....
  • SOUND WIRE WITH POLARITY - GearIT 14 Ga Speaker Wire copper wire cables come with colored pvc jacket for easy polarity identification. Typically, red....
  • FOR IN WALL, IN CEILING SPEAKERS - Our GearIT CL2 speaker wire cable comes in 75ft, 100ft, 125ft, 150ft, 200ft lengths and white colored trailer wire.....
Check Stock

Blue Ox BX88206 Coiled Cable with Female Receptor

  • The Trailer conversion connection wire functions as a converter tool which fit all 2-wire vehicle electrical system to standard 3-wire trailer RV hitch pick up trucks. 2.1 amps signal circuit, 5.0 amps taillight circuit..
  • Our trailer tailight conventer model converts 2-wire system ( left and right turn/brake) to a 3 wire system (left and right turn, brake seperate) also fit some 4 wire to 5 wire trailer light system that allow to split brake and turn signals on pick up trucks into separate wires..
  • Noted: tailgate light/tail light function is not support in this converter so does not run though this converter. Truck can't tell the difference between blinker and brake light. Once you separate both of two, Since it reads AND signals, your additional blinkers won't flash with the hazard lights, but your brake lights will..
  • Easy install by yourself. Standard color code wire connection. Functions was mark on the converters for help you install simultaneously. The best is use a multimeter to ensure the input and output Voltage..
  • The trailer converter is a great tool for trailer to Splice turn signal / brake light ..
Check Stock

Miady 25ft Trailer Wiring Harness with 4 Flat Connector, 18 AWG Color Coded Wires Trailer Light Wiring Harness Extension with 4ft White Ground Wire

  • Long Enough: The Miady 25' Trailer Wiring Harness gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • Wishbone Style Wiring Setup Designed: Constructed with Wishbone Style Wiring Setup and 4 way connectors design makes the running light circuit and splits it at the trailer connector, so you do not have to run a jumper wire from one taillight to the other. Simplify the installation process to save more time..
  • 4FT LENGHT GROUND WIRE: Equipped with 4 Way flat plug connector with trailer ends and a white ground wire, designed to split at the trailer tongue and run down each side of the trailer. The trailer side ground wire is 4ft, it is enough to use for your trailer, which is completely sealed for a long corrosion-resistant installation..
  • SIMPLIFIED CONNECTION: Come with 18 AWG COLOR CODED WIRES clearly identify each wire's function, makes it much easier for wires connection as well as adding more convenience and installation safe and straight-forward..
  • Wide Application: Ideal for marine boat trailer, horse trailer, motorcycle trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug) . - We provide 24*7 friendly c....
Check Stock

Nilight - 50048R 7 Way Electrical Trailer Junction Box 7 Gang Trailer Wire Connector Junction Box Weatherproof for Rewiring Camper RV Caravans Boat 7 Pole Cable Connection Box,2 Years Warranty

  • TIDY YOUR TRAILER WIRING: A sturdy 7-Pore Trailer Junction Box with 7 terminal studs provides safe and secure trailer wiring install with markings to easily identify the correct connections.Fit Type: Universal.
  • EFFICIENT DESIGN: Quickly adds additional equipment and lights, change the power connector, or redo your trailer cable without leaving any wire splices exposed to the elements.
  • TIGHTLY SEALED PROTECTION: Durable plastic housing coupled with rubber grommets provides superb protection against nature's bad days.
  • UPGRADE TRAILER CONNECTION: Quickly adds extra lights and accessories. Upgrade your old trailer wiring, makes re-wiring, troubleshooting and fixing electrical problems much simpler. Perfect for wiring up your trailer, camper, caravans, boats and other towed vehicles.
  • PACKAGE INCLUDES: 1 junction box with a set of Fasteners + color card + pack of rubber boot grommets.
Check Stock

Pull-Tite Steel Security Cable Wire Seals Numbered Anti-Tamper Security Tags Self-Locking Shipping Padlock (Blue, Pack of 50pcs)

  • Tamper proof: Single use cable security tags can't be opened once locked, unless cut the wire away, provides proofs of loading or transit tampering, adding security to prevent unauthorized entry.
  • Printing: Pull Tite Cable Seals are laser printed with unique serial number for unique ID recognition. Water proof and never fade. Besides the serial number make it easy to tracking the inventory.
  • Material: ABS Plastic and zinc casting, φ1.8mm (0.07") Steel Wire, Total length: 300mm (11.8").
  • Tamper evident security seals is perfect for logistics and shipping area, such as trucks, trailer, containers, bowsers, wagons, rail cars, cargo, vans doors, vehicle doors, tankers, warehouses, chemical barrels, valves, etc.
  • Easy operation: pull tight the numbered steel wire seals for immediately security, locking length is adjustable. Remove by cable/wire cutter.
Check Stock