ReviewsWireless Data Module

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • ...S and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software serial port or hardware serial port to be connected to GPRS Shield.
Check Stock

Legrand, Home Office & Theater, Network Switch, Platinum Grey, 12 Port, AC1014

  • NETWORK INTERFACE MODULE: 12 port Cat 5e network interface module has high density mini patch panel..
  • SWITCH BETWEEN DATA AND VOICE APPLICATIONS: Easily switch an outlet from Voice to Data or from Data to Voice with this Cat 5e Network Interface Module..
  • CAT5e SPECIFICATION: It meets Cat5e specifications and RJ45 ports are labeled 1 thru 12..
  • AVAILABLE SIZE: The network module has two different size – 6 port, 12 port..
  • AVAILABLE STYLE: It has two different specification – Cat 5e, Cat 6.
Check Stock

Honeywell YTH5320R1000 Wireless Focuspro Thermostat Kit, Non-Programmable Redlink Enabled

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • Module receives communication from the wireless devices.
  • Maintains 62 F for heating and 82 F for cooling.
  • THERMOSTAT: Same great features of the FocusPRO thermostat - now wireless..
Check Stock

2021 SYNC 2 to SYNC 3 Upgrade Kits for Ford F350, Wireless Carplay SYNC 3.4 Interface Module 8-Inch Capacitive Touch Screen APIM Module, GPS Navigation Antenna (2012-2017 Ford F350)

  • (Compatible with) : 2021 SYNC 2 to SYNC 3 upgrade complete kit. SYNC3.4 upgrade kit with 8'' Screen. With the latest map version na220. Support Wireless CarPlay..
  • (Easy Installation) : The perfect design of SYNC 2 to SYNC 3 is rigorously tested before leaving the factory to ensure that there are no product defects and to provide you with better service. Please send VIN in time when purchasing.(we will pre-program the data matching according to your car Vin for free. Remote/Online technical support provide.).
  • (Wireless CarPlay) : It is very simple to setup and works efficiently. Convert wired to wireless carplay.This is ideal for trips, you can put your iPhone in your pocket and connect to the car ’s infotainment system without having to use a cable to connect it..
  • (Functions ): Compatible with all functions of the original car, including seat ventilation heating, steering wheel heating, seat adjustment, climate adjustment, active parking assistance, reverse image, intelligent voice control, Sirius and other functions..
  • (Package Includes) : Complete SYNC 2 to SYNC 3....
Check Stock

Honeywell YTH6320R1001 Redlink Wireless Focuspro Thermostat Kit, 2 Packs

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

Honeywell YTH6320R1001 Wireless Focuspro Thermostat Kit, Programmable Redlink Enabled

  • EQUIPMENT INTERFACE MODULE(EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices.
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling.
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home.
Check Stock

Honeywell YTH5320R1025 Wireless Non-Programmable FocusPRO Kit with Wireless Adapter Allows to be Used with TrueZONE Panel

  • WIRELESS FOCUSPRO THERMOSTAT: Same great features of the FocusPRO thermostat – now wireless. Installs in minutes. Displays outdoor temperature and humidity. 2 month low battery warning. Dual Fuel enabled..
  • EQUIPMENT INTERFACE MODULE (EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices..
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling..
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home..
Check Stock

Abovehill 12V Wireless RF Remote Control Relay Switch Universal 1-Channel 315MHz Receiver with 1 Transmitters for Garage Door Openers, Cars, LED Lights & More

  • [Wireless Remote Control Module] The module can be remotely controlled from a long distance and has strong anti-interference. The remote control distance of the open space is 30 meters, which will reduce the control distance in the case of interference or wall blocking. The specific situation is determined according to the site..
  • [Wireless Remote Control Module] It is a single-channel control module with a working voltage of 12V DC and an operating frequency of 315mhz. It can directly drive DC0-30V/80-250VAC load, and the relay can withstand up to 10A.Remote control uses 12V 23A dry battery(No battery)..
  • [Wireless Remote Control Module] Its coding type is fixed code and learning code. The control mode is three modes: jog, self-lock and interlock. Delivery defaults to jog mode. If you need to switch to self-locking or interlock mode. You need to change the contacts labeled “L” and “T” on the back of the receiving module..
  • [Wireless Remote Control Module] It also has learning and deletion capabilities. The operation is very simple and detailed in the product description..
  • [Wireless Remote Control Module] A wide range of applications, from simple home remote control to autonomous control, such as windows, entrances, garage doors, alarm systems, lift....
Check Stock

Honeywell YTL9160AR1000 E-Connect Wireless Programmable/Non-Programmable Line Volt Thermostat Kit

  • Equipment Interface Module (Eim): All Hvac Equipment Is Wired To The Module. Module Receives Communication From The Wireless Devices.
  • Return Air Sensor: Works With The Equipment Interface Module To Maintain Safe Indoor Temperatures If Power Is Lost At The Wireless Thermostat. Maintains 62 F For Heating And 82 F For Cooling.
  • Red Link Wireless Technology: Powered By Red Link Reliability. No Interference With Other Wireless Devices In The Home.
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU V3 CP2102 ESP-12F 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
Check Stock

waveshare 4G/3G/GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano,Based on SIM7600A-H,4G Communication GNSS Positioning,LTE-FDD B2/B4/B12 Brand Support LTE CAT4 up to 150Mbps

  • The SIM7600A-H 4G HAT (Based on SIM7600A-H) is a 4G communication and GNSS positioning module, Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards(compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B) and Jetson Nano. LTE-FDD B2/B4/B12 Brand,supports LTE CAT4 up to 150Mbps for downlink data transfer.This module is mainly applicable in North America (US,CA).
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
  • Onboard USB interface, to test AT Commands, get GPS positioning data,etc.Onboard CP2102 USB to UART converter, for serial debugging.Onboard audio jack and audio decoder for making telephone call.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.Supports SIM application toolkit: SAT Class 3, USAT..
Check Stock