ReviewsWireless I2c Arduino

SunFounder The Most Complete Starter Project Kit Compatible with Arduino IDE Mega 2560 R3 Mega328 Nano Mega2560, Scratch Coding, Included 42 Online Tutorials

  • 【Compatible with Arduino IDE】Suitable for Young Beginners and Experienced Software/Hardware Engineers who wants to learn electronics and programming..
  • 【250+ Quality Components】Comes with Development Board compatible with Arduino Mega 2560, 1602 I2C LCD, Motors, Ultrasonic Modules etc..
  • 【42 Interesting Projects 】Each project has a circuit diagram and tested code with detailed explanations..
  • 【C Language and Scratch】Contains C language courses compatible with Arduino IDE and interactive graphical programming based on Scratch..
  • 【Professional Technical Support】We have 10 years of Maker Service, our technical support team and customer service are always ready to help you..
Check Stock

ACEIRMC 6pcs ESP8266 D1 Mini WiFi Dev Board ESP-12 ESP-12F NodeMcu Mini Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino

  • This is D1 mini , it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini.
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our mini development board compatible with Arduino WeMos and can be programmed in the for Arduino IDE..
Check Stock

GeeekPi 2Pack LCD 2004 Module with I2C Interface Adapter Blue Backlight 2004 20x4 LCD Module Shield for Raspberry Pi Arduino Uno

  • The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures..
  • The common LCD1602, LCD2004, and LCD12864 are fabricated using liquid crystal materials and communicated using the I2C bus..
  • It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL)..
  • Compatible with all devices with I2C interfaces, such as Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more..
Check Stock

HiLetgo 2004 20X4 LCD Display LCD Screen Serial with IIC I2C Adapter Yellow Green Color LCD for Arduino Raspberry Pi

  • High quality 2004 LCD screen with IIC i2c Adapter, Displays 4-lines X 20-characters..
  • Backlight control, you can control by jumpers, can also be controlled by the program..
  • IIC/I2C interface was developed to reduce the IO port usage on Arduino board..
  • Adjustable contrast, the backlight control to provide library..
  • 5V power supply, the device address will be 0x27 or 0x3F at Random..
Check Stock

HiLetgo 0.96\ SSD1306 I2C IIC SPI Serial 128X64 OLED LCD Display 4 Pin Font Color Yellow Blue

  • Works well SSD1306 library, a nice OLED for Arduino, Beaglebones, Raspberry Pi.
  • Simple 4-wire I/F makes it a snap to use, easy to get up and running.
  • Low-power, very legible and vibrant, a crisp screen, pixels stand out very well even in a brighter circumstances like full sunlight.
  • There are other I2C IIC(4Pin) and SPI (7 Pin) interfaces and two different Font Colors for your option.
Check Stock

SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic) High-Precision Breakout No Soldering Required Breadboardable Contains a Rechargeable Backup Battery Allowing a Warm-Start decreasing time-to-First-fix

  • Capable of 10mm, three-dimensional accuracy and both rover and base station operations.
  • Geofencing, variable I2C address, variable update rates, even the high precision RTK solution can be increased to 20Hz.
  • USB-C (which enumerates as a COM port), UART1 (with 3.3V TTL), UART2 for RTCM reception (with 3.3V TTL), I2C (via the two Qwiic connnectors or broken out pins), and SPI.
  • Compatible with Arduino library shows how to read latitude, longitude, heading and speed over I2C without the need for constant serial polling. Time to First Fix: 25s (cold), 2s (hot).
  • Note: This is the GPS board only. It does not come with cables or microcontroller..
Check Stock

GY-521 MPU-6050 MPU6050 Module, 3 Axis Accelerometer 6 DOF Gyroscope Sensor Module Kit 16 Bit Converter Data Output IIC 3-5v Compatible with Arduino (10 Pieces)

  • GY-521 MPU-6050 module: integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port, like another accelerator of other brands, magnetometer, or Digital Motion Processor (DMP) of other sensors.
  • Parameter range: the MPU-6050's angular velocity range is ±250, ±500, ±1000 and ±2000°/sec (dps) for accurate fast and slow motion, and user-programmable accelerator full-frame sensing the range is ±2g, ±4g±8g and ±16g.
  • Transmission can pass I2C up to 400kHz or SPI up to 20MHz.
  • Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs.
  • Easy to use: the measured values of the sensor can be interrogated by the I2C interface.
  • The accelerometer can be operated at both 3.3V and 5V.
  • Compatible with Arduino and Raspberry Pi.
  • Universal usable: the sensor can be applied to develop various entertaining applications and systems.
  • Nice for projects with gaming and virtual reality devices, navigation (for drones and RC planes) and DIY robots.
Check Stock

ACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module for WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs

  • This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
  • D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, Compatible with WeMos D1 Mini..
  • 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB....
  • WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
  • Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check Stock

6pcs GY-521 MPU-6050 MPU6050 Module 3 Axis Accelerometer Gyroscope Sensor Module 6 DOF MPU-6050 16Bit AD Converter Data Output IIC I2C DIY Kit for Arduino

  • 【GY-521 MPU-6050 Module】Integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port.
  • 【Built-in Chip】With three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs..
  • 【Easy to use】The measured values of the sensor can be interrogated by the I2C interface. The accelerometer can be operated at both 3.3V and 5V. Suitable for Arduino and Raspberry Pi..
  • 【User-programmable Gyroscope】With a full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer with a full-scale range of ±2g, ±4g, ±8g, and ±16g Supports the I2C serial interface and has a separate VLOGIC reference pin..
  • 【Universal Usable】The sensor can be used to develop various entertaining applications and systems. Ideal for projects with gaming and virtual reality devices, GPS navigation (for drones and RC planes) and DIY robots..
Check Stock

ACEIRMC VL6180 VL6180X Range Finder Optical Ranging Light Sensor Module Gesture Recognition Sensor I2C Interface 3.3V 5V Emitter Ambient Light Sensor for Arduino I2C (4)

  • VL6180 VL6180X Range Finder Optical Ranging Sensor Module Gesture Recognition Sensor.
  • VL6180 is a time-of-flight ranging sensor. The sensor contains a very small laser source and a matching sensor..
  • I2C interface for device control and data, two programmable GPIOs..
  • VL6180X can detect the "time of flight" or the time required for the laser to recover the sensor to calculate the distance..
  • VL6180 VL6180X Range Finder Optical Ranging Sensor Module for Arduino I2C Interface 3.3V 5V gesture recognition.
Check Stock

SunFounder Raspberry Pi Pico W Ultimate Starter Kit with Online Tutorials, 450+ Items, 117 Projects, MicroPython, Piper Make and C/C++ (Compatible with Arduino IDE)

  • 【Ultimate Raspberry Pi Pico W Kit】Contains over 450+ items and 117 online projects for Arduino and Raspberry Pi Pico W users, from beginners to advanced programmers..
  • 【450+ Items】Aside from the Pi Pico W boards, all the necessary components are also included: Sensors (MPU6050, DHT11, Ultrasonics), Actuators, LEDs, I2C LCDs, RGB LED strips, Servo motor, and Pump,etc..
  • 【Pre-soldered Raspberry Pi Pico W Included】The Raspberry Pi Pico W is an RP2040-based microcontroller board with wireless (802.11n)..
  • 【Provided 117 Projects】The Pi Pico W Kit contains 117 professional projects varying in complexity.It contains 9 examples of IoT protocols for IFTTT, MQTT,etc..
  • 【3 Programming Languages】Raspberry Pi Pico W Ultimate kit features three programming languages to meet the needs of programmers of every level: 62 MicroPython lessons, 39 lessons in C/C++, and 16 lessons in Piper Make..
Check Stock