ReviewsWireless Trolling Motors

Truck Upfitters Surface Mounted 100A Circuit Breaker (12V-48V, 100 Amp) for DC Automotive and Marine/Boat use: Main Power Breaker, Audio, Winches, Solar, Lighting, Electric Motors & Other Accessories.

  • ...mp disconnect switch, as a main 100 amp marine circuit breaker, as a car amp fuse, or simply as a DC 100 amp circuit breaker. This is a 12-48 volt DC (Direct Current) fuse breaker & CANNOT be used IN ANY AC (Alternate Current) OR HOUSEHOLD APPLICATION..
  • Be sure to consult your owner's manual when being used for your trolling motor plug and receptacle. Typically a 100 amp fuse is used on 12V trolling motors with 30, 40, or 45 lbs of thrust, 24V trolling motors with 70 lbs of thrust, & 36V trolling motors with no more than 100 lbs of thrust. A pair of 6 AWG copper lugs are included in this kit, but please verify that a AWG gauge trolling motor wire will be thick enough to handle your specific volt trolling motor plug..
  • Always consult a 12-48V DC wiring specialist if you are unsure about how to determine what type (this is a DC), amp (this is a 100A), and volt circuit breaker you require for your vehicle & vehicle accessories. A 1-300 amp circuit tester can be used to determine the draw of an accessory during initial, peak, and normal operation of the accessory, but this inline breaker is not a substitute for a sound professional installation. Always consult a professional before installation..
Check Stock

Trolling Motor Plug Receptacle Set,Trolling Motor Plug,12V 24V 36V 48V Waterproof Marine Boat DC Power Connector for Trolling Motor,Down Rigger,Fishing Reel,for Freshwater and Saltwater

  • ✔【SELF-LOCKING UNIQUE DESIGN】The trolling motor plug and receptacle set has unique self-locking design,whcih ensure the reliabilty of the connection, the safety and easy boating in harsh marine environments.The included plug and receptacle could stably connect trolling motor and power supply.It is applicable connecting in any freshwater and saltwater..
  • ✔【PREMIUM-QUALITY COMPONENTS】Marine plug and receptacle set has the function of IP67 waterproof,high temperature resistance,flame retardant,weather resistance.Corrosion-resistant components include waterproof sealing cover,steady gasket,brass gold-plated components and ergonomically contoured handle and a set of screw gaskets.Those high-quality components enable your reliabily and safety work..
  • ✔【MULTIFUNCTION】The trolling motor plug could be used under harsh marine environment.It is suit for trolling motors,downriggers,electric fishing reels,or any other DC-powered device.The plug and receptacle has the design of 2-wire configuration,and it is applicable for 12V,24V,12/24V,24/36V,36V,and 48V systems.50A continuous rating..
Check Stock

Minn Kota 1866680 i-Pilot Heading Sensor Spot-Lock BT (Bluetooth), PowerDrive & Riptide PowerDrive White

  • Available as an add-on accessory for PowerDrive and Riptide PowerDrive trolling motors that come pre-installed with Bluetooth i-Pilot systems (model year 2017 and after)..
  • This heading sensor comes standard with Ultrex, Ulterra, Terrova, Riptide Ulterra and Riptide Terrova trolling motors that come pre-installed with Bluetooth i-Pilot and i-Pilot Link systems. (model year 2017 and after)..
  • ​HEADING SENSOR ONLY.  Compatible with Bluetooth-enabled i-Pilot systems only.
  • Refer to original product manual to ensure system compatibility.
Check Stock

Bullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

  • PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
  • FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
  • ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check Stock

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock

Motor Sock Trolling Motor Cable Sleeve Black

  • Manage and protect your accessory cables on your trolling motor.
  • Heavy duty velcro that runs along the entire length of the product. No need to disconnect any cables or wiring, just wrap and go.
  • One size fits all: Minnkota Ultrex, Fortrex, Maxxum, and Edge Trolling Motors.
Check Stock

Ironwood Pacific EasyTroller Trolling Plate - Standard with Fins for Motors 50 HP - 300 HP

  • SLOWS TROLLING SPEED - Slow your boat to as low as 1 MPH for the ideal trolling speed.
  • DAMAGE-RESISTANT DESIGN - The patented hinged plate design flexes upward to prevent damage to the plate under accidental acceleration.
  • EASY INSTALLATION - Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller.
  • TWO MODELS TO FIT YOUR MOTOR - The Standard Model fits outboard and stern drive motors of 50-300 horsepower, while the Short Model is for 30-45....
  • OPTIONAL FINS FOR GREATER PERFORMANCE - The optional hydrofoil trolling plate model combines two products into one to improve fuel economy and....
Check Stock

Minn Kota 1358731 PowerDrive Freshwater Electric-Steer Bow-Mount Trolling Motor with Digital Maximizer & i-Pilot GPS 70 lbs Thrust 54 Shaft

  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that....
  • AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to....
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact....
  • Weedless Wedge 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge 2 is....
Check Stock

Minn Kota 1358761 PowerDrive Freshwater Electric-Steer Bow-Mount Trolling Motor with Universal Sonar 2, Digital Maximizer, & i-Pilot GPS, 70 lbs Thrust, 60' Shaft

  • Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor’s shaft, with shielded connectors.
  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
  • AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Check Stock

KIWI design Link Cable 20FT Compatible with Quest 2/1/Pro and Pico 4, 3.0 Link Cable Accessories for PC VR Headset

  • Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft, with shielded connectors.
  • i-Pilot Link Integrated GPS Trolling System: i-Pilot Link gives you unprecedented control over your boat by linking your trolling motor to your Humminbird fish finder. Control your trolling motor from Link's color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
  • Weedless Wedge 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge 2 is one of the most trusted props in fishing.
Check Stock

Minn Kota 1358749 PowerDrive Freshwater Electric-Steer Bow-Mount Trolling Motor with Universal Sonar 2, Digital Maximizer, & i-Pilot GPS, 55 lbs Thrust, 54" Shaft

  • Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft, with shielded connectors.
  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
  • AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a ....
Check Stock