ReviewsWireless Z Wave Water Valve

Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)

  • 2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels..
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do....
Check Stock

EATON RF9642-ZDRB Z-Wave Plus Accessory Dimmer, Oil-Rubbed Bronze

  • Wireless accessory for Eaton’s Z-Wave Plus Universal Smart Dimmer (RF9640-N).
  • Ideal for applications where no traveler wires exist for 3-Way & multi-location control.
  • Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
  • Can be associated with (5) other Z-Wave Plus devices when used with a compatible Z-Wave controller.
Check Stock

ENERWAVE Z-Wave Plus Relay, Hidden Smart Switch Wireless Remote Control to Lights and Ceiling Fans, 120-277VAC, 10A, Neutral Wire Required, ZWN-RSM1-PLUS, Black

  • Z-Wave micro switch installs behind an existing wall switch to upgrade it into a Z-Wave switch. Upgrade home automation system while keeping your original switches.
  • Wirelessly control your appliances (lights, fans) from an internet-connected smartphone, tablet, or computer.
  • Utilizes Z-Wave Plus featuring improved battery life, wireless range, increased bandwidth.
  • Acts as a Z-Wave repeater to extend the range of Z-Wave signal up to 100ft.
  • the switch will still work if the module fails.
  • Z-Wave hub and neutral wire required. Single Pole, 120-277 VAC, 50/60Hz, Up to 150ft Range, 10, 000mA (10A) Maximum Load, 908. 42MHz, Slim Design - Dimensions: 1. 63" x 1. 63" x 0. 82". FCC and ETL listed. 1-year.
Check Stock

Zwave Door Sensor Aeotec Recessed Door Sensor 7, Z-Wave Plus Enabled Smart Door Sensor Battery Powered, SmartStart S2, Zwave Hub Required SmartThings Fibaro Home Centre 3 Hubitat

  • Safer than the previous z-wave recessed sensor. Come with z wave security 2 (S2) framework which is the most advanced security for smart home zwave devices and controllers, z-wave gateway and zwave hub in the market today, it’s better to protect your family.
  • Anytime and anywhere, it’s great wireless door sensors for security. Smart hubs compatible with z-wave hub Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more. Frequency: 908.40 MHz, 916.00 MHz.
  • Take your home under zwave controller. Open close sensor zwave Optimized to use up to 66% less battery power to communicate than previous generations. 3 year+ battery life powered by 1 x 1/2 AA battery. Battery included. Never worry about missing any important moment or running out of battery.
Check Stock

GoControl Z-Wave Wall Dimmer Switch, 1000W - WD1000Z-1

  • Wireless 1,000W z-wave wall dimmer switch offers both z-wave & manual control for connected lights.
  • Linear-only Auto sense feature allows for Local lamp activation Independent of the z-wave controller status.
Check Stock

Minoston Z-Wave Plug with Energy Monitor, 700 Z-Wave Outlet Switch, Z-Wave hub Required, Work with SmartThings, Wink, Vera(MP31ZP)

  • This Z-Wave smart plug is compatible with those Z-Wave hub: SmartThings, Vera, Fibaro, Homeseer. ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS!Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Energy Efficient: Z-Wave outlet comes equipped with energy monitoring capability. Monitor use and Save on bills. Enjoy a more efficient home..
  • Timer schedule: Control lights and application to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Wireless control: A large range of types of load are supported to be wirelessly controlled like lamps or small appliances from anywhere and any time by your mobile devices. Home automation is from a little Z-Wave Plug to control small appliances that you want. Overcurrent protection, when the loading is over 15A, the device wil turn off!.
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. Space-saving design leaves the top second outlet free for continued use. Z-Wave Frequency: 908.42MHz..
Check Stock

EATON RF9640-NWS Z-Wave Plus Universal Dimmer, White Satin

  • Replaces standard switch to add local and wireless control.
  • Compatible with most common residential lighting loads including LED, CFL, INC, MLV, ELV, HAL.
  • Single pole and 3-Way control: Use with Z-Wave Plus Accessory dimmer RF9642-Z.
  • Features 7 step blue load indicating LED light that can be dimmed in ON or OFF state.
  • Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
  • Voice and app-based control when used with compatible Z-Wave controller.
Check Stock

Dome Home Automation Water Shut-Off Valve - for Pipes up to 1 1/2", White (DMWV1)

  • WORKS WITH SMART HOME DEVICES – On-demand control from anywhere using your smart home hub’s mobile app. Seamlessly integrates with Wink, SmartThings, Home Seer, Nexia, and other hubs.
  • SHUTS DOWN WATER LEAKS AUTOMATICALLY – Valve controller shuts off water automatically when your smart home system detects leaks.
  • SMART HOME AUTOMATION WATER ALARM – Receives notification when water leaks are detected and shuts off water, to keep your home safe even when you’re out of town.
  • DON’T RISK A WATER LEAK WHEN YOU’RE ON VACATION – Use your Z-Wave mobile application to remotely turn your water shut-off valve off when you know you’re going to be out for a week or two..
  • USE ON ANY QUARTER-TURN BALL VALVE UP TO 1-1/2 – Works with 1/4-turn ball valves, even those found on water heaters and radiant heat systems.
Check Stock

Minoston Z-Wave Switch On/Off Toggle Wall Light Switch Works with SmartThings, Wink, Support 3-Way Installation, Signal Repeater, Required Z-Wave Hub, White(MS12Z)

  • Voice Control: This Z-Wave smart toggle on/off switch is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS..
  • Z-Wave certified gateway: The MS12Z is compatible with Samsung Smartthings, the Wink Hub, and all certified Z-Wave controllers..
  • Work with: This Z-Wave enabled universal switch works for most residential lighting control. It supports LED, CFL,incandescent and halogen bulbs. Supported voltage - 120 VAC..
  • Wireless control: Turn lights on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away..
  • Installation Requires: hard-wired connections. Neutral wire required for single-pole and 3-way installation Ca This Z-Wave switch works w/existing (dumb) switch for a 3-way wiring scenario..
Check Stock

HomeSeer HSM200 Z-Wave Motion, Temperature and Light Sensor with RGB LED Indicator

  • Z-WAVE PLUS MULTISENSOR: Reports Motion, Temperature, Light Levels With Wireless Z-Wave Commands.
  • ANNUNCIATOR: RGB LED May Be Programmed To Glow 7 Different Colors When Things Happen In Your HomeSeer Controlled Smart Home.
  • LINE POWERED: Just Plug It Into Any 120-Volt US Style Receptacle | No Batteries To Replace.
  • WORKS AS REPEATER: Expands The Range And Performance Of Your Z-Wave Network.
  • COMPATIBILITY: Works with HomeSeer, Hubitat, Home Assistant and SmartThings (with HomeSeer Edge Driver). NOT FOR USE WITH Wink or Vera..
Check Stock

SCHLAGE FE599NX Camelot by Accent Keypad Entry with Z-Wave with 16086 Latch 10027 Strike Lifetime Brass Finish

  • Works with Alexa for voice control (hub required, Alexa device and hub sold separately)..
  • Receive text or email alert when your family uses their codes, so you know who's home.
  • Grant access to your home when you can't be there with a scheduled code to let someone.
  • Add, delete or change user codes remotely.
  • Run the most important systems in your home-thermostats, locks, lights and cameras from anywhere with Nexia Home Intelligence.
  • This Z-Wave enabled product communicates wirelessly to other Z-Wave products in your home.
  • remote management with a Nexia Home Intelligence system.
  • This Z-Wave enabled product allows for wireless communication to other Z-Wave products in your home.
  • Door range: 1-3/8 to 1-3/4 (35mm-44mm) standard.
Check Stock