ReviewsWiring Conduit Home

Upgrade Fish Tape Wire Puller Through Wall Wire Threader Fish plus Fish Cable Fastener with Steel rope 40FT(12M)

⭐【Perfect Flexibility and Rigidity】Unlike fiberglass wire, it will not break if you bend too much, unlike other steel fish tape, it will not curl a lot. Our Plastic-Coated Steel Fish Tape has strong traction, good flexibility, Anti-aging and high temperature..
⭐【Plastic-Coated Steel】With non-conductive plastic-coated construction, the versatile fish cable is applicable for telecom, electrical, wall, floor conduit and other wiring installation. It is the perfect tool to assist you in pulling cables through occupied duct and panel boxes..
⭐【Fish Tape Fastener】Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly..
⭐【360°Available Head Wheel】The Head wheel at the end of steel wire is 360° available, much easy to across through the bends. And the unique connection method makes it durable and convenient life..
⭐【Attention】The Fish Cable works great in smaller conduit, but not thicker cables or large pipe..

Check Stock

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

... KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 2 position switches to turn each light Off or On Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most application....

Check Stock

Soleebee Gold Leaves Leaf Ribbon, 11 Yards Vine Leaves Ribbon Trim Perfect Decoration for DIY Craft, Garland, Party, Wedding (Gold)

❤ The artificial Vine leaf is made of better polyester leaf material, create a beautiful environment for you. Not easy to break, not easy to fade, no smell..
❤ Length of the leaf ribbon is 33 feet(10M), Width is about 0.2 inch(5mm). You can cut different lengths depending on your needs in any situation, it's very wonderful!.
❤ Emulation vine, easy to work with and the colors are beautiful and the quality is good. It can be used to dress up your home, or let it climb to the top of the window or conduit, expose wiring, stair, TV wall..
❤ The Braided Decorated can be used in many occasion, such as Wedding, Party, Gardening, Photo all, Flower shop, it can also decorate a vase, bridal headdress, gift wrapping, bouquets, DIY crafts and so on..
❤ We will provide you with friendly customer service allows you to enjoy the most satisfying shopping experience..

Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

...- This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most applications....

Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

...This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most application....

Check Stock

Reliance Controls 31410CRK Pro/Tran 10-Circuit 30 Amp Generator Transfer Switch Kit,Gray

Convenient transfer switch kit, ideal for your circuitry and multi-wiring needs, is also made for reliably-fast installation in both residential and commercial applications.
Designed specifically for generators up to 7,500 maximum running watts.
18-inch flexible conduit whip attaches easily to the load center.
Maximum single-pole circuits: 10 / Maximum double-pole circuits: 5.
Features a rugged, powder-coated steel cabinet. six combination knockouts and more.

Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

...This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of damage and should last for 10+ years in most appl....

Check Stock

Custom Cable Connection 22 AWG 8 Conductor Stranded Shielded Plenum Cable CL3P White Jacket for Security/Alarm/Access Control/Sound - 100 Foot Roll in a bag

...National Electrical Code) that refers to building and quality standards relevant to wiring..
CL3-RATED, SHIELD AND DRAIN WIRE: This 22 AWG 8 conductor cord has been given a CL3 rating, which refers to its in-wall classification. This wiring is rated for safe in-wall use and can support up to 300 volts. The UL-listed conduit or wiring shield is composed of an aluminum and polyester covering and includes a drain wire that completes the electrical circuit..
POSSIBLE USES AND QUANTITY VARIATIONS: Typically, this 8-conductor wire is to be used by a certified electrician to wire air circulation and heating systems, but it also works as an in-wall speaker wire and for telecommunications tools. This braided electric wire comes in a variety of quantities, including a 100-foot roll, a 500-foot spool, and a 1000-foot spool..
CUSTOM CABLE CONNECTION QUALITY: Here at Custom Cable Connection, we are family owned and have been in business since 2002. We have made it our mission to provide high-quality audio, video, network, and RF cable assemblies as well as OEM products for our loyal customers. We manufacture in-house as often as possible with US-sourced products..

Check Stock

Custom Cable Connection 22 AWG 4 Conductor Stranded Shielded Plenum Cable White CL3P Jacket for Security/Alarm/Access Control/Sound - 100 Foot Roll in a bag

...National Electrical Code) that refers to building and quality standards relevant to wiring..
CL3-RATED, SHIELD AND DRAIN WIRE: This 22 AWG 4 conductor cord has been given a CL3 rating, which refers to its in-wall classification. This wiring is rated for safe in-wall use and can support up to 300 volts. The UL-listed conduit or wiring shield is composed of an aluminum and polyester covering and includes a drain wire that completes the electrical circuit..
POSSIBLE USES AND QUANTITY VARIATIONS: Typically, this 4-conductor wire is to be used by a certified electrician to wire air circulation and heating systems, but it also works as an in-wall speaker wire and for telecommunications tools. This braided electric wire comes in a variety of quantities, including a 100-foot roll, a 500-foot spool, a 1000-foot spool, and a 1000-foot pull box..
CUSTOM CABLE CONNECTION QUALITY: Here at Custom Cable Connection, we are family owned and have been in business since 2002. We have made it our mission to provide high-quality audio, video, network, and RF cable assemblies as well as OEM products for our loyal customers. We manufacture in-house as often as possible with US-sourced products..

Check Stock

Custom Cable Connection 22 AWG 2 Conductor Stranded Shielded Plenum Cable White CL3P Jacket for Security/Alarm/Access Control/Sound - 100 Foot Roll in a bag

...National Electrical Code) that refers to building and quality standards relevant to wiring..
CL3-RATED, SHIELD AND DRAIN WIRE: This 22 AWG 2 conductor cord has been given a CL3 rating, which refers to its in-wall classification. This wiring is rated for safe in-wall use and can support up to 300 volts. The UL-listed conduit or wiring shield is composed of an aluminum and polyester covering and includes a drain wire that completes the electrical circuit..
POSSIBLE USES AND QUANTITY VARIATIONS: Typically, this 2-conductor wire is to be used by a certified electrician to wire air circulation and heating systems, but it also works as an in-wall speaker wire and for telecommunications tools. This braided electric wire comes in a variety of quantities, including a 100-foot roll, a 500-foot spool, a 1000-foot spool, and a 1000-foot pull box..
CUSTOM CABLE CONNECTION QUALITY: Here at Custom Cable Connection, we are family owned and have been in business since 2002. We have made it our mission to provide high-quality audio, video, network, and RF cable assemblies as well as OEM products for our loyal customers. We manufacture in-house as often as possible with US-sourced products..

Check Stock

Carlon CFB-12 Ceiling Fan Box Saddle Round New/Old Work 4-Inch Diameter by 2-3/8-Inch Depth Black

Sidemount Plus Fan Box allows safe, simple installation of fans and fixtures, ideal for remodel applications.
Supports ceiling fans and lighting fixtures up to 70 pounds.
Includes three 1/2-inch Romex or conduit knockouts, two sets of Romex knockouts, one Romex clamp.
21.5-cubic-inch wiring capacity, electrical box is 2-1/8 inches deep.
Includes sidemount bracket, electrical box, Saf-T-Cap, mounting hardware and instructions.

Check Stock