Simpson Strong-Tie S11A175RNBP 1-3/4 x .120 304SS Ring-Shank Roof Nails 480ct
- 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
- 1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails.
- Fits all standard 15-Degree coil roofing nailers.
ReviewsWith Head Roofing Nails
Simpson Strong-Tie S11A150RNBP 1-1/2\ x .120 304SS Ring-Shank Roofing Nails 600ct
- 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
- 1-1/2-Inch by 0.120 stainless steel Coil Roofing Nails.
- Fits all standard 15-Degree coil roofing nailers.
Simpson Strong-Tie S11A125RNBP 1-1/4 x .120 304SS Ring-Shank Coil Roof Nails 720ct
- 304 Stainless Steel 15-Degree wire coil ring shank roofing nails.
- 1-1/4-Inch by 0.120 stainless steel Coil Roofing Nails.
- Fits all standard 15-Degree coil roofing nailers.
STINGER 0136260 NailPac Cap Nails - 1 Electro Galvanized Nails with 1 Plastic Collated Caps 0136260 for use with CN100B & CN100 Cap Nailers
- SUPERIOR HOLDING POWER - 1” (25mm) plastic collated caps and 1”x.083” (25mmx2.1mm) full round head ring shank nails holds underlayment securely.
- EASY RELOADS - Contains 10 reels of 200 collated plastic caps and 10 coils of 200 nails which covers 25 square.
- WHERe TO USE - Use corrosion-resistant electro galvanized nails in areas more than 3,000 ft (914m) from saltwater.
- MEETS ASTM REQUIREMENTS - Cap nails meet ASTM F1667 requirements and exceed ASTM D3161 and D7869-17 for wind and UV resistance.
- BEST PRACTICE UNDERLAYMENT FASTENER - Use exclusively with STINGER CN100B for the best practice installation of roofing underlayment.
3PLUS HCN45SP 11 Gauge 15 Degree 3/4\ to 1-3/4\ Coil Roofing Nailer
- Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails.
- Adjustable shingle guide for quick shingle spacing.
- Integrated side skid pads prevent the tool from sliding off roof when placed on its side.
- High-capacity magazine holds up to 120 coil nails at a time.
- Tool free adjustable depth of drive for consistent and controllable nail fit.
- Interchangeable trigger for single shot or bumper fire function..
Solid Copper Nails - 1.5 Inch Smooth Shank Roofing Nails - Slating Spikes - Perfect For Copper Flashing Install - Wide Flat Head Design - Decorative Finishing (5 oz)
- Solid 1.5 Inch Copper Nails - Used For Roofing, Slating, Flashing, Decor.
- Flashing Kings Corrosion Resistant Copper Nails Are Perfect For Mounting Our Flashing Products.
- Order With Confidence Our Products Are Covered By The Amazon A To Z Guarantee.
HBT HBCN45P 7/8" to 1-3/4" Coil Roofing Nailer with Magnesium Housing 11 GA Roofing Nail Gun
- Drives 11 gauge full head coil roofing nails ranging from 7/8'' To 1-3/4''.
- Selective actuation switch allows for either sequential or contact mode.
- Tool-free adjustable depth control helps set nails properly.
- adjustable shingle guide allows for quick and consistent shingle spacing.
- Durable and lightweight magnesium housing helps reduce user fatigue.
- Skid-resistant pads/wear guards for safety and tool protection.
- contact safety With Carbide inserts for less wear and tear.
Senco RoofPro 450 Coil Roofing Nailer
- Drives 11 gauge (.120-Inch) , full round head roofing nails 3/4-Inch 1-3/4-Inch smooth shank..
- Durable molded grip to reduce operator fatigue.
#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)
- Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
- #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
- Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
- For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
- Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.
SITLDY Heavy Duty T50 Staples and 18GA Brad Nails, 2400-Count 6 Sizes Includes: 5/16', 3/8', 1/2', 9/16' T50 Staples and 3/8', 1/2' Brad Nails Assorted, Galvanized
- T-Shape & Chisel point type: the T-shaped head and Chisel point type help you push the nail out more accurately and conveniently..
- Rust & corrosion resistance: Galvanized surface can block rust and corrosion resistance..
- Universal Size: 20 gauge Standard T50 staples and 18 gauge brad nails are generally suitable for most manual, electric, pneumatic staple guns..
- Wide applications: It is ideal choice for light-duty to heavy-duty stapling jobs such as housing insulation&wrap, roofing felt, fence wiring, weather stripping, carpet under laying, upholstery, DIY and craft materials.
- Total quantity: There are 2400 pieces T50 staples and 18 gauge brad nails with 6 different sizes in the package, T50 staples: 5/16″-400, 3/8″-400, 1/2″-400, 9/16″-400.
- 18 gauge brad nails: 3/8″-400, 1/2″-400. You can choose different sizes of nails according to actual needs..
#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer
- #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
- 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
- Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
- #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
- Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.