ReviewsWith Square Pipe

QWORK 1/2\ - 14 NPT Pipe Tap, Carbon Steel, for Clean and Re-thread Damaged or Jam Pipe Threads

Characteristics:QWORK 1/2"-14 NPT Pipe Tap is an ideal choice for pipe fittings..
Size: 1/2" size with 14 NPT (National Pipe Taper)..
Usage: Used to cut internal threads of pipes..
100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..

The products are forged from high-quality bearing steel, with good surface treatment, high strength and good toughness..
Size of square end of product: 0.55 x 0.55 inch..
1/2'' NPT pipe joint is mainly used for cleaning and thread chasing..
The product is mainly aimed at the repair of threads such as rust, fracture and slip of water pipe joints..
The product includes: 1 cylindrical pipe thread tap. Please pay attention to the finished size when purchasing..

* Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.5 Different Sizes ，great for tapping various threads, meet your different needs..
* BSP Pipe taps are used to cut new threads or repair damaged threads / jam pipe threads and have excellent results,it is the best choice for your toolbox..
* In accordance with National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8.

Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
Nominal size of the tap is that of the pipe fitting being tapped..
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..

Nominal size is that of the pipe fitting being tapped.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Ideal for cutting internal threads in pipe fittings and whenever an extremely tight fit is required.

Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
Right-hand cutting tool has a clockwise cutting function..
NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..

Four cutting wheels make cutting steel, stainless steel, cast and ductile iron an easy job..
With only 4" of clearance required around pipe makes using this cutter anywhere possible..
Guide fingers ensure perfect wheel alignment for square cuts..
A closed 360° frame forces all energy into cutting the pipe for maximum efficiency..

...e area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit.
place 6 in. drain grate on top of low-profile adapter. 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials.
Grate top is 5-7/8 in. square with ¼ in. grate openings.
Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square.
Comes with one 6 in. Square Grate and Low-Profile Adapter. Hassle-free limited lifetime warranty guarantees the NDS product is free from defects—or we’ll replace it.
NDS grates are a proven alternative to traditional concrete drains with UV inhibitors are used to prevent fading and cracking from the sun, chemical-resistant, rustproof and maintenance-free, lightweight and easy to install.

Warm tips: CN,US,EU Patent Pending. Check if the hex key shaft is locked or not before use.
It is recommended to use a variable-speed electric drill with low-speed cutting.
Appropriately add water for cooling to prevent the pipeline from melting at high temperature..
Apllication: Come with 1.5inches & 2inches guide disks that are suitable for Schedule 40 PVC Pipe(Note: this will NOT work on schedule 80 pipe), CPVC and ABS Ventilation Pipe, Drain Pipe, Water Pipe..
High quality: Fabricated aluminum alloy body with hex-shaped, stainless steel hex key shaft..
Square carbide insert: Carbide insert provides the cutting surface, you can be turned 90 degrees for new cutting surface before use..
Compatibility: The 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills..

Maximum working pressure of 150 pounds per square inch.
Safety nozzle offers 10.5 standard cubic feet per minute at 100 pounds per square inch.
Rubber tip offers 11.6 standard cubic feet per minute at 100 pounds per square inch.

Maximum working pressure of 150 pounds per square inch.
Safety nozzle offers 10.5 standard cubic feet per minute at 100 pounds per square inch.
Rubber tip offers 11.6 standard cubic feet per minute at 100 pounds per square inch.