ReviewsWood Bed Risers

4Pack Adjustable Bed Risers with Screw Clamp, Couch Risers Fit for Furniture Thickness 0-1.5 In, Elevation in Heights 4 In Heavy Duty Risers for Sofa Desk Chair Cabinet Supports 20000 Pounds(Brown)

  • 【Needn't Drill Hole, Adjustable Clamp Mount Design】 GALOYAU Furniture frame risers: install the clamp directly on the furniture or bed frame, so you don't need to damage your furniture by drilling a hole. The clamp is suitable for bed frames or furniture with a thickness of 0 inches to 1.5 inches. Heightened groove protection: 30mm/1.18'', you can adjust the gap at will, lock it with the attached screwdriver, it will be firm and never fall off..
  • 【Durable Sturdy Material with Special Felt Pad】 Adjustable bed risers made of strong hard plastic material, the furniture riser is super durable, and the four risers can support high duty of 20,000lbs. The bottom special felt pad helps protect wood, carpet and all kinds of floors without scratching. and at the same time they plays a role in sound insulation, Insulation, heat insulation effect..
  • 【Protect Furniture Legs, Great for Robot Vacuums】 Furniture risers with screw clamp fit for sofa risers, bed risers, table, mattresses, closets, office chairs risers and nightstands. Protect the legs of high quality furniture for decades. The riser with a total height of 134mm/5.3 inches can actually in....
Check Stock

BTSD-home Bed Risers 4 inch Heavy Duty Metal Furniture Risers Steel Table Risers Elevator up to 4\ (4 Pack)

  • Size of couch risers -- Raise 4 in height. The 4 inch bed risers size((W*L*H)):2.36*2.36*4.72 inch. The internal size((W*L*H)): 2.36*2.36*0.71 inch..
  • Material -- Bed elevator blocks are made of carbon steel with non-woven bottom surface,which don't rust or scratch furniture and floor..
  • Appearance - Exquisite appearance does not occupy the place, the color and furniture legs are very consistent, as the original leg..
  • Advantage - Table leg risers are metal which much more load-bearing than wood or plastic. In addition to self-adhesive, we design 0.67 inch raised edge at the top to prevent legs slipping..
  • Occasion -- Please measurement the size of your furniture legs carefully before ordering. We recommend using metal bed lifts on 2 inch wide furniture legs, such as king bed risers, chair, desk, table and couch, bed frame. Not recommended for legs width less than 0.85 inch. ( Refer to the description on the A + details ).
Check Stock

MIiix Hoom 4 Pack 3 inch Heavy Duty Stackable Bed Risers Dark Wooden Color, Square Elevator Lifts Up to 3 in for Furniture Sofa Table Coach Bed Frame, 2200 lbs

  • ...t but the biggest reason is storage. MIIX HOOM Bed Square Shaped Riser gives maximum elevation with stackable option and highest lift over support. Pls note the material is PLASTIC, but looks very realistic and cant believe that it is not real wooden.
  • 【Durable & Stackable Riser】– To increase the elevation, our risers are designed with stackable engineering to securely stack the heavy-duty riser on the additional riser to safely handle the weight without occurring any dent or crack on hardwood or hard surfaces. You can get Adjustable Height 3 Inch 6 Inch or 9 Inch by stacking them..
  • 【Beautiful and Protect Floor】-Each of these plastic bed risers with dark brown imitation wood grain finish (NOT REAL WOOD), beautiful and exquisite appearance which can match your furniture perfectly. Also,with extra 4pc foam floor pads and the smooth plastic edges of these bed risers won't scuff floors or snag carpet, won't scratch or dent hardwood floors..
  • 【Fits on Most Home Furniture】–This home furnishing accessory fits into raising up desks, chairs, sofas,furniture and beds. Its strength can handle heavy duty furniture and protects your floors, gives you storage space.
  • 【100% Crack Free Warranty】 – Other risers crack easily in spite of assurances and t....
Check Stock

Ezprotekt 1.2 Inch Square Bed Risers Table Leg Risers- Solid Steel Bed or Furniture Post, Creates an Additional 1.2\ of Height or Storage! Heavy-Duty Table, Chair, Couch or Sofa Riser(Black, 4 Pack)

  • ❤【STURDY STEEL MATERIAL DESIGN】- Our square furniture risers made of high quality strong Solid Carbon Steel and the bottom of non-woven fabric Design. They won't crack like other risers. Elevation up to 2 Inches per riser & lifts over 5,000 LBs.The External Size: 2.36"(W) x 2.36"(D) x 1.2"(H). WARM TIPS: PLEASE CAREFULLY MEASURE THE DIAMETER SIZE OF YOUR FURNITURE LEGS BEFORE ORDERING. NOTE:THE DIAMETER SIZE OF YOUR FURNITURE LEGS CAN NOT OVER THAN THE DIAMETER OF OUR FURNITURE RISERS..
  • ❤【INCREASED 1.2 INCHES HEIGHT】- Adds additional height not only storage space under beds, but also added height allows vacuum cleaners or robot vacuum work more flexibly. They also make more convenient for the elderly to get in and out of bed. Increase the 1.2 inches height on beds, couchs, armchairs, tables, sofas and other heavy stationary furnitures, avoiding shoulder pain and neck pain caused by low height of furniture..
  • ❤【FRIENDLY TO WOOD FLOORS】- Strong couch legs risers bottom is made of felt furniture pads, with Self-Adhesive White Sticker on the top. Heavy duty and smooth edges would safely handle with the weight without causing any dent or crack on hardwood or hard surfaces. Bottom felt pads Protect your floors from scratch..
Check Stock

Ezprotekt 1.2 Inch Round Bed Risers Table Leg Risers - Solid Steel Bed or Furniture Post, Creates an Additional 1.2\ of Height or Storage! Heavy-Duty Table, Chair, Desk or Sofa Riser (Black, 4 Pack)

  • ❤【STURDY STEEL MATERIAL DESIGN】- Our round furniture risers made of high quality strong Solid Carbon Steel and the bottom of non-woven fabric Design. They won't crack like other risers. Elevation up to 2 Inches per riser & lifts over 5,000 LBs.The External Size: 2.36"(W) x 2.36"(D) x 1.2"(H). WARM TIPS: PLEASE CAREFULLY MEASURE THE DIAMETER SIZE OF YOUR FURNITURE LEGS BEFORE ORDERING. NOTE:THE DIAMETER SIZE OF YOUR FURNITURE LEGS CAN NOT OVER THAN THE DIAMETER OF OUR FURNITURE RISERS..
  • ❤【INCREASED 1.2 INCHES HEIGHT】- Adds additional height not only storage space under beds, but also added height allows vacuum cleaners or robot vacuum work more flexibly. They also make more convenient for the elderly to get in and out of bed. Increase the 1.2 inches height on beds, couchs, armchairs, tables, sofas and other heavy stationary furnitures, avoiding shoulder pain and neck pain caused by low height of furniture..
  • ❤【FRIENDLY TO WOOD FLOORS】- Strong couch legs risers bottom is made of felt furniture pads, with Self-Adhesive White Sticker on the top. Heavy duty and smooth edges would safely handle with the weight without causing any dent or crack on hardwood or hard surfaces. Bottom felt pads Protect your floors from scratch..
Check Stock

FASONLA Bed Risers (Set of 8) Furniture Risers Lifts Height 1", 2" or 3", Solid Natural Wood Risers for Bed, Furniture, Table, Sofa, Chair with Non-Slip Recessed Hole (Dark Brown Color, 1 Inch)

  • ✔️ CUSTOMIZE TO YOU OWN NEEDS: Each riser adds 1 inch height, You can lift your bed or furniture 1", 2" or 3". You should not interlocking more than 4 risers for 1 leg, it is not safe.To raise your bed, simply stack these interlocking risers on top of each other with each connector between (Each set including 8 risers, 4 big connectors and 4 small connectors). There are many combinations for you to interlocking them,each way gives each interesting result. You can refer to our 4 ways as pictures.
  • ✔️ FULL ACCESSORIES: 8 x Risers, 4 x Small Connects, 4 x Big Connects, 8 x Anti-Slip Pads and a Carton Box. NON-SLIP RECESSED HOLE: The 1.85” diameter recessed hole on top and 2.6" diameter recessed at bottom with universal fit contours designed to helps securely hold all bed or furniture feet to up 2.6 inches wide and prevents legs or wheels from slipping out of the riser. Please check your bed or furniture before purchase..
  • ✔️ MADE FOR STRENGTH AND DURABILITY: Our Raisers are cut from a single block of solid Rubber wood. They are strong and durable enough to support the heaviest furniture and bed in your home and can be used for a lifetime....
Check Stock

BTSD-home 8 Pack Bed Risers 4 pcs 3 Inch Couch Risers and 4 pcs Furniture Risers

Check Stock

Richards Homewares 5980-4 Wood Bed Lifters, Set of 4, 4.5"x4.5"x3.875", Mahogany

  • ... Just think of how much storage you have just gained instantly by using these bed lifters.
  • EASY TO USE WITH ALMOST ANY BED – Universal Design to fit different bed styles. Can be used with square or round bed posts and with casters no more than 2.75” wide. Two sets may be needed for a King bed. One set of bed risers increases your underbed space is 2.75”. Can also be used to raise a Sofa’s height to allow storage underneath as well as ease.
  • STACKABLE-Buy two sets and the extra storage space increases to 6.25”. Great when needing to store bulkier items such as quilts, blankets or sweaters under a bed. If you are tall, these bed risers raise your bed and make it easier to get into bed. Not made to stack more than two sets..
  • HIGH QUALITY – Durable wood stained with a mahogany color looks beautiful. The bed risers are stylish as well as functional..
Check Stock

FASONLA Bed Risers (Set of 8) Furniture Risers Lifts Height 1', 2', 3' or 4', Solid Natural Wood Risers for Bed, Furniture, Table, Sofa, Chair Risers with Non-Slip Recessed Hole (Walnut Color, 1 Inch)

  • ✔️ CUSTOMIZE TO YOU OWN NEEDS: Each riser adds 1 inch height, You can lift your bed or furniture 1, 2, 3 or 4 inches (2 sets purchase required for adding 3 or 4 inches). To raise your bed, simply stack these interlocking risers on top of each other with each connector between (Each set including 8 risers, 4 big connectors and 4 small connectors). There are many combinations for you to interlocking them, each way gives each interesting result. You can refer to our 3 ways as pictures..
  • ✔️ FULL ACCESSORIES: 8 x Risers, 4 x Small Connects, 4 x Big Connects, 8 x Anti-Slip Pads and a Carton Box. NON-SLIP RECESSED HOLE: The 1.85” diameter recessed hole on top and 2.6" diameter recessed at bottom with universal fit contours designed to helps securely hold all bed or furniture feet to up 2.6 inches wide and prevents legs or wheels from slipping out of the riser..
  • ✔️ MADE FOR STRENGTH AND DURABILITY: Our Raisers are cut from a single block of solid Oak wood. They are strong and durable enough to support the heaviest furniture and bed in your home and can be used for a lifetime..
  • ✔️ RECOMMENDED USE: The 1.85” diameter hole at the top and 2.6" diameter recessed at bottom, please check your bed or furniture before purchase. You can use this riser....
Check Stock

Round Bed Risers Wood (Set of 8), Solid Natural Wood Furniture Heavy Duty Leg Risers Lifts for Sofas Table Desk Chair Couches with Non-Slip Rubber Pad & Non-Slip Recessed Hole (Black)

  • ESIGN YOU NEEDS : Each bed risers wood adds 1.2'' height, can be used on both sides. You can stack up each furniture risers together to raise higher height easily (no more than 4 risers) to lift bed, desk.
  • NON-SLIP RECESSED HOLE : The 2”diameter recessed hole on top, and 2.6" diameter recessed at bottom with universal fit contours designed to helps securely hold all desk risers,prevents legs or wheels from slipping out of the riser.
  • EXTRA HEIGHT for CONVENIENCE & CLEANING : Adds additional height space under beds and furniture making cleaning underneath furniture easier. Also, furniture risers for sofas can help you create more space for storage. Give you a beautiful and tidy house and you will in good mood when you're laying at home.
  • RECOMMENDED USE : Stahala Leg riser lifts bedroom, living room, and home office furniture to a more ergonomically correct height that provides a safer biomechanical advantage to user. Help people who have health issue with theri spine or the people sit with wheelchair in a comfortable way.
  • IDEAL FOR HOME AND OFFICE: Stahala is focoused on designing exquisite woodwork .This prime Woodcraft wooden furniture risers are perfect to use as bed, sofa, and desk risers. Also a potential solution to handle uneven floors and prevent....
Check Stock

RCHYFEED Adjustable Bed Risers 8Pcs Furniture Frame Riser,Fit for Furniture Leg Diameters or Edge Length 0.8-1.6",Elevation in Heights 4 Inch Heavy Duty for Table Chair Support up to 5000lbs (Black)

  • Adjustable Screw Clamp - It's designed to clamp mounted directly to furniture or bed frame riser, you can adjust screw clamp at will to fit your furniture risers and lock tight by a screwdriver.So you don't need to damage your furniture by drilling a hole.It's fit for furniture legs with diameters or edge length of 0.86-1.57 inch(22-40mm).It’s suitable for dresser risers cabinet risers couch risers table risers sofa risers chair risers desk risers bed risers..
  • Elevate 4 Inch of Height - The bed risers 4 inch adds extra height under bed storage space,making cleaning underneath furniture easier, especial great for robot vacuums,furniture risers 4 inch also create extra storage space under beds for convenient storage..
  • Heavy Duty Bed Risers - Couch risers made of sturdy materials so these furniture risers are super strong and durable can easily lift up to 5000lbs.Not crack like the ordinary products in the market..
  • Not Worry About Fall Off - Unlike other groove wooden bed riser without screw clamping device, any slightly movement may cause risers unstable and falling down from furniture or bed leg. Our risers ....
Check Stock