ReviewsWood Cutting Saws

DEWALT Jigsaw Blades Set, T-Shank, 5-Piece (DW3795H)

  • This set covers a wide range of popular applications from wood cutting to metal cutting.
  • Cobalt steel (Bi-Metal) maximizes blade life and durability.
  • T-shank design fits all Bosch and DEWALT jig saws.
Check Stock

Furniture Mod - Furnicraft

  • Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts.
  • Designed with 80 carbide-tipped teeth for ultra-fine finish wood cutting.
  • Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws.
Check Stock

Bosch Professional Circular Saw Blade Standard (for Aluminium, 173 x 20 x 1.8 mm, 60 teeth; Accessories: Cordless Circular Saw)

  • Maximised battery runtime thanks to the extra-thin cutting edge.
  • Clean cuts and precise results thanks to high-quality carbide teeth.
  • Reduced noise, fewer vibrations and less heat thanks to expansion slots.
  • The saw blade fits all common cordless plunge saws and hand-held circular saws as well as cordless metal saws.
  • The circular saw blade is ideal for cutting aluminium and other non-ferrous metals, plastics, epoxy resin and even wood.
Check Stock

Weaver Curved Saw Scabbard 27 With Snap Hook, Black

  • JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
  • UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
  • RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
  • RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
  • PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.
Check Stock

Magic Saw Set Kit, 9 in 1 Hand Saws Woodworking, Multi Tool Blades Universal Hacksaw Kit, Coping Saws for Woodworking, Cutting Wood, Plastic, Glass, Tile, Metal, Rope, PVC Pipe, Rubber

  • Work as magic saw set kit, magic hand saw, magic saw kit, the magic saw, magic handsaw set, magic hand saw set, magic saw multipurpose magic saw.
  • Use as multi purpose magic saw, magic saw blades, magic saw set, magic saw multipurpose, magic saw 6 blade, magic saw multipurpose cutting tool, hand saws woodworking, coping saw blade.
  • Work for whole saw kit, folding camp saw, saw zaw blade, coping saws for woodworking, panel saw kit, hand saw kit, steel chop saw, mitre saw 12 inch, bow saw blade.
  • Use for metal cutting saw blade 14, scroll saw wood, folding saw survival, camping bow saw, bow saw blades, straight flush saw, hole saw kit wood, coping saw blades for wood.
  • Suit for door jamb saw, hacksaw blades for metal, handsaw for metal, hack saw metal, coping saw for wood, hacksaw for metal cutting, metal coping saw blades.
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ...have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is ....
Check Stock

Woodworking Sometimes Measure Once Carpenter Circular Saw Pullover Hoodie

  • Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM.
  • Perfect for slicing through both hard and softwoods of all kinds.
  • Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts.
  • Designed with 80 carbide-tipped teeth for fine-finish wood cutting.
  • Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws.
Check Stock

Luomorgo 75mm/3 inch Hole Saw, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 3 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a 100% satisfied shopping experience..
Check Stock

Reciprocating Saw Blades Sawzall Blades 12Inch for Wood Cutting Pruning Saw Blades 5TPI 5 Pack

  • Package includes 3 wood pruning saw blades for reciprocating saws..
  • Bates wood pruning saw blades are made of high-quality carbon steel, making them highly durable, tough, and long-lasting..
  • High-quality CRV heat treatment makes our saw blades suitable for wood and trimming tools. Also, they are compatible with universal brands in the market..
  • Bates wood pruning saw blades are equipped with sharp teeth at optimum angles to reduce cutting friction and heat, making your pruning and wood cutting more easily and quickly..
  • Our reciprocating saw blades are suitable for outdoor garden pruning, wood cutting, tree pruning, and plastic pipe cutting..
Check Stock

Luckyway 10 Inch 52 Teeth with 5/8 Inch Arbor Multi-Purpose TCT Circular Saw Blade for Cutting Wood, Aluminum and Non-Ferrous Metals

  • DIMENSIONS - Includes 1pc 10*5/8*52T Multi-purpose TCT circular saw blade..
  • APPLICATION - Ideal for cross-cutting Wood Plastic Aluminum Metal Cutting. Suitable for Miter saws and Table saws..
  • MATERIAL - Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
  • FEATURES - Incorporates an TCG (Triple Chip Grind) design, Blade Use Steel cutting. Super-thin laser cut kerf for easy cutting high-density carbide stays sharper longer Perma-Shield nonstick coating protects blade..
  • Plate Material: 65Mn Steel.Special tooth design , cutting fast , cutting more safety..
Check Stock

Luomorgo 100mm/4" Hole Saw, 1.4 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall & Metal Sheet

  • High-Performance Materials: Hole saws made of M42 high-speed steel and BI metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength and stronger wear resistance..
  • Efficient & Smooth Cutting: High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design ensures smooth and clean cutting of the hole saw blade..
  • Widely Used: Hole saws can cut 4 inch diameter holes in wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals. In addition to punching cans or recessed lights, punching saws are also suitable for home projects on air ducts, speakers, ceiling lamps, etc..
  • Warm Prompt: Keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut.
  • Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a satisfied shopping experience..
Check Stock