ReviewsWood Door Roller

(6) Garage Door 2\ NYLON ROLLER Wheel w/ Cap 7\ Shaft 13 Ball Bearing Sealed by The ROP Shop

  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (1) Sealed Nylon Garage Door Roller.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

DIYHD 6FT Raw Material Galvanized Box Track Sliding Barn Door Hardware for Exterior Barn Door

  • Only box rail barn door hardware for sale,door panel and handle are NOT included.
  • This kit can hold MAX door weight 300lbs,can be used for both interior door and outside door.
  • Suitable for door panel thickness 1 1/2" to 2".
  • The rollers vertical lock nuts are adjustable.
  • The gap between door and wall is supper small,the box track need install on the wood board(thickness:3/4" for reference).
Check Stock

The ROP Shop | 2\ Nylon Garage Door Roller with 4\ Stem & 11-Ball 6200ZZ Precision Bearing

  • The ROP Shop replacement 2" White Nylon Roller with 6200ZZ Bearing Offer Softer, Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

The ROP Shop | (Pack of 2) 2\ Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use

  • The ROP Shop replacement 2" Nylon Roller with 11-Ball Bearing for Residential & Commercial Garage Door.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

DIYHD 8FT Raw Material Sliver Box Track Double Sliding Barn Door Hardware Wall Mount Kit for Exterior Door

  • Only box rail barn door hardware for sale, door panel and handle are not included.
  • This kit can hold max door weight 300Lbs, can be used for both interior door and outside door.
  • Suitable for door panel thickness 1 1/2" To 2".
  • the rollers vertical lock nuts are adjustable.
  • the gap between door and wall is supper small, the box track need install on the wood board.
  • 8FT double door kit including:4FT box track*2.
Check Stock

DIYHD 13FT Raw Material Sliver Box Track Double Sliding Barn Door Hardware Wall Mount Bracket Exterior Door Kit

  • Only box rail barn door hardware for sale, door panel and handle are not included.
  • This kit can hold max door weight 300Lbs, can be used for both interior door and outside door.
  • Suitable for door panel thickness 1 1/2" To 2".
  • the rollers vertical lock nuts are adjustable.
  • the gap between door and wall is supper small, the box track need install on the wood board.
  • 13FT double door kit including:6.6FT box track*2.
Check Stock

(12) Garage Door 2\ Nylon Roller 4\ Stem 11 Ball Bearing Smooth Quiet Heavy Duty by The ROP Shop

  • The ROP Shop replacement 2" Nylon Garage Door Roller with 4" Stem & 11-Ball 6200ZZ Precision Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

DIYHD M0083-5ft Box Rail Hardware Heavy Duty Steel Sliding Barn Door Track, 5FT, Wall Mount Kit

  • Only box rail barn door hardware for sale, door panel and handle are NOT included.
  • This kit can hold MAX door weight 300lbs, can be used for both interior door and outside door.
  • Suitable for door panel thickness 1 1/2" to 2".
  • The rollers vertical lock nuts are adjustable.
  • The gap between door and wall is supper small, the box track need install on the wood board.
Check Stock

DIYHD 8FT Double Sliding Barn Door Hardware Box Track Wall Mount Kit for Exterior Door

  • Only box rail barn door hardware for sale, door panel and handle are not included.
  • This kit can hold max door weight 300Lbs, can be used for both interior door and outside door.
  • Suitable for door panel thickness 1 1/2" To 2".
  • the rollers vertical lock nuts are adjustable.
  • the gap between door and wall is supper small, the box track need install on the wood board.
  • 8FT double door kit including:4FT box track*2.
Check Stock

HOME MASTER HARDWARE Garage Door Hinge & Roller Tune Up Kit Garage Door Hardware Kit for 16 x 7' or 18 x 7' Door

  • High quality garage door hinge & roller tune up kit. Garage door hinges are made of steel,zinc plated finish,nylon shells and steel wheels with zinc plated finish ,durable and sturdiness,high quality can be used for a long time..
  • The garage kit comes with heavy duty 14 gauge hinges ,adjustable top roller brackets and premium quality quiet 2 in nylon rollers.high quality parts to ensure smooth, lasting door operation..
  • Garage door hinge & roller tune up kit is designed for an couple 16" wide x 7" high or a 18" wide x 7" high garage door.It's great for any door and would be perfect to quiet down your noisy door..
  • Package include 5 Pcs #1 14 gauge hinges ,2 Pcs #2 14 gauge hinges ,2 Pcs #3 14 gauge hinges ,2 Pcs adjustable top roller brackets ,11 Pcs 2 in ball bearing nylon roller wheels,1 Pcs safety wire rope and mounting screw hardware..
  • Home Master Hardware Lifetime Warranty :If anything ever goes wrong with your garage door hinge & roller tune up kit , please contact us,we will replace them with new ones and provide best service (lifetime tech support, 12 month replacement)..
Check Stock

Garage Door Hinge #3-14 Gauge Steel With Galvanized Finish - Residential/Light Commercial Garage Door Replacement | HEAVY DUTY

  • 8 Value Pack: Package Incliuded: 14 Gauge Garage Door Hinges, sufficient quantity for your daily use and timely replacement. Screws are included.
  • #1 Garage Door Hinges: Garage door center hinge is designed to connect together the 1st and 2nd panel of a sectional garage door and accept 7/16 inch diameter roller shafts.
  • Wide Application: Garage door hinge parts are suitable for most residential and light commercial garage door replacement, sush as automatic garage door, solid wood -garage door, remote garage door, vault garage door, villa garage door, engineering garage door, and so on.
  • Easy to Install: Garage door bracket are super easy to install. They are great replacement parts on heavy garage doors accessories and old damaged garage door hinges.
  • Premium Material: High quality galvanized metal garage door hinges, heavy duty, rust-proof, sturdy and durable for long time use.
Check Stock