ReviewsWood Extruder

Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • 300°C HIGH-TEMP PRINTING: Creality new 3D printer Ender-3 S1 Pro Print excellently with diverse filaments, such as PLA, ABS, WOOD, TPU, PETG, PA, etc..
  • “SPRITE” FULL-METAL DUAL-GEAR DIRECT EXTRUDER: the new upgraded direct extruder of the Creality 3D Printer Ender-3 S1 Pro comes with the pushing force up to 80N, the extruder realises smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR TOUCH AUTO LEVEL SENSOR: CR Touch can completely quickly adjust the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-levelling program, which can collect more samples than the 9-points of the BLTouch which makes the bed levelling more precise..
  • HIGHER PRINTING PRECISION AND EASY TO USE: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw + Z-axis dual motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. You can also quickly install the printers with 6 steps..
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • ...0℃ High-temp Nozzle: This creality 3d printer comes with upgraded brass nozzle which can stand 300℃ high-temp, allow you to choose more kinds of filament like ABS, PETG, PA, PLA, TPU and Wood. Not only for more possibilities of creation but also gives you a smoother printing..
  • “Sprite” All Metal Direct Drive Extruder: The new upgraded direct extruder comes with the pushing force up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR-Touch Auto-level Sensor: CRTouch can complete quickly adjust the the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-leveling program, which can collect more samples than the 9-points of the BLTouch which makes the bed leveling more precise..
  • Higher Printing Precision & Easy to use: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. You can also quickly install the printers with 6 steps..
  • Upgraded in All aspects: New 4.3 inch color touch screen installed and it takes an user frien....
Check Stock

FLSUN V400 3D Printer, 400mm/s High Race FDM Printer, 300x300x410mm Large Building Size, Auto Leveling, 7-inch Touch Screen Delta 3D Printer Direct Extruder

  • V400 maximum printing speed is 400mm/s which saving more than 70% of the printing time.
  • Double linear guides ensure unparalleled stability.
  • Amazing Build Colume & Direct Drive Extruder.
  • With an extraordinary print size of 300 x 410 mm.
  • The hotend and the extruder housing have been combined, resulting in compact and lightweight system.
  • High Temperature Nozzle & Various Filament.
  • A bi-metallic heatbreak allows you to print up to 300 °C, which ensures widely filament compatibility.
  • V400 features the function of resume printing after power outage or any other unexpected stoppage, save time and filament.
  • User-friendly display & Pre-installed Klipper firmware.
  • An easy-to-use 7-inch LCD touchscreen makes handling particularly user-friendly.
  • The V400 comes with Klipper firmware pre-installed.
Check Stock

FLASHFORGE Creator Pro 2 3D Printer with Independent Dual Direct Drive Extruder for 4 Printing Modes, Metal Frame Structure, Acrylic Covers, Stable & Precise Printing with ABS, PLA, PETG, PVA, Hips

  • 【Independent Dual Extruder】Compared with traditional parallel extruders, the independent dual extruder structure can print copy and mirror models at the same time, and better supports soluble consumable printing. Higher printing efficiency.
  • 【Considerate Machine Design】Fully enclosed body with removable cover to meet the temperature requirements of different strands.
  • All metal frame body with stable structure.
  • Alloy material construction plates with 6.5mm thick alloy material which can be heated, resistant to transformation..
  • 【Residue Scraping Design】In the process of dual printing mode, the filament tends to overflow due to the continuous heating of the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, and get cleaner dual prints..
  • 【Widely Filament Compatibility】240℃ direct drive dual extruder works with PLA, ABS, PVA (print with PLA), HIPS (print with ABS), PETG Filament, support 3rd party filament. CP2 The Best Dual Extruder 3D Printer Choice!.
  • 【Warranty and Service】All FLASHFORGE 3D printers come with lifetime technical support and a one-year warranty. We provide 24-hour online customer service, if you have any questions about the product operation or so....
Check Stock

Entina X40 IDEX 3D Printer, Independent Dual Extruder 3D Printer with TMC2208 Silent Driver, 4.3' Touch Screen, PEI Spring Steel Magnetic Platform, Built-in Camera, Wi-Fi Cloud Printing 300x300x400mm

  • 【Independent Dual Extruder 3D Printer】The X40 idex 3d printer is designed with independent dual extruders that supports 4 printing modes: single nozzle printing.
  • duplication mode printing and mirror mode printing. You can print two different types materials and colors model, or print two same models at the same time..
  • 【Large Build Volume】Ultra-large forming volume allows you to print single model up to 11.8"(L) x 11.8"(W) x 15.7"(H) / 300 x 300 x 400mm, which provide enough space for your 3d printing creation, give you greater freedom to print. The large 3d printer with dual extruder can use PLA, ABS, TPU, PVA, PETG, HIS, Nylon, Wood, and Metal..
  • 【Auto Leveling & Super Silent】X40 dual extruder 3d printer equipped with intelligent leveling system, which can automatically compensate for the printing height of different points of the hotbed, friendly use for both expert-level and beginners. 32 Bit motherboard with TMC2208 silent driver provides a quieter printing at less than 50db noise level..
  • 【Build-in Camera & Wi-Fi Printing】Our big 3d printers X40 equipped with Wi-Fi chip and built-in camera that helps to keep an eye on prints in case of incorrect settings, and helps to pause or abort printing via Wi....
Check Stock

eSUN Wood PLA Filament 1.75mm, Wood PLA 3D Printer Filament, 0.5KG Spool 3D Printing Filament for 3D Printers, Wood Color

  • ... in an outstanding surface finish and are highly precise..
  • 【Tangle Free & No Plugging】Full 0.5KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder..
  • 【Environmental Friendly PLA】Wood PLA is a mixture of PLA and recycled wood particles, which produces natural wood effect. Made with starch raw materials derived from renewable plant resources, biodegradable and eco-friendly, non-toxic and low odor..
  • 【Vacuumed Sealed Packaging】0.5KG Spool Wood PLA Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging..
Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8 CR-10 CR-10S CR-10 S4 and CR-10 S5 Left Hand

  • [UPGRADING] Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT] MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.
  • [Easy to use: used] for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [Stable and durable] Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original....
  • [Advantage] the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And....
Check Stock

R QIDI TECHNOLOGY i Fast 3D Printer, Industrial Grade Structure, with Dual Extruder for Fast Printing, Super Large Printing Size 330×250×320mm

  • 【Faster printing】Fully industrial-grade structure, using the second-generation Qidi dual Z-axis structure, all of the original motion structure is upgraded to linear guides, with the high temp extruder, the filament extruding is faster and smoother, the printing accuracy is higher .The printing speed is increased by 20%, it is set to print easily at 100cc per hour..
  • 【Freedom in the choice of the filament】 Qidi iFast can print almost all kinds of filaments which suitable for FDM 3D printers on the market, such as PLA ,PLA+ ,ABS ,PETG, NYLON,etc. The iFast 3d printer equipped with a heated chamber, which can be heated to 60°C. The excellent mechanical structure can produce more robust manufacturing-grade parts..
  • 【Freedom in manufacturing of the complex parts】 Qidi iFast is equipped with automatic dual extruder, which can automatically adjust the left and right extruder up and down according to the software. With the PVA (water-soluble) support, it is very suitable for printing manufacturing-level parts with complex structures and realizing precision manufacturing..
  • 【All metal high temp extruder】 Compared with the normal brass nozzles which on the market, it is more durable and prints smoother. The iFast 3d printer is pre-installed with du....
Check Stock

BIQU H2 Extruder V2.0 New Upgraded Dual Gear Extruder 3D Printer Dual Drive Feed Not Stuck for Creality Ender&CR Series Printers Geeetech Anycubic Mega S Printers and Prusa I3 DIY 3D Printer Kits

  • √【Upgraded Gear Is No Longer Stuck】①The design of output gear modulus is changed from 0.5 to 0.25, reducing gear outer diameter,which can....
  • √【The Advantages of Upgraded Stainless Steel Gear】H2 extruder V2.0 is upgraded to new high quality stainless steel output and transmission gears....
  • √【Brand New Titanium&Copper Alloy Heat Break】BIQU H2 extruder V2.0 adopt titanium&copper alloy all metal heat break, the best quality material....
  • √【High Performance Unique Cooling System】The heat sink structure on H2 extruder V2.0 is optimized to ensure airflow is diverted up and away from....
  • √【Wide Compatibility】H2 extruder has wide compatibility for variety 3D printer on the market like Creality Ender & CR Series Printers, Geeetech,....
Check Stock

Official Creality Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor Direct Drive Upgrade Kit for Ender 3 Ender3v2 Ender 3 pro Ender 3 Max Support 1.75MM Filament

  • Compatible With Ender3 Series - Creality Spirit direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
  • All Metal Design - With Compact and light weight design, 54x50x64.3mm small size, 288g weight. Creality Spirit direct drive extruder pro kit perfectly....
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N....
  • Dual Gear Feeding, More Stable Printing -The Creality Sprite direct drive extruder adapt double-toothed structure which does not damage filaments,....
  • Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive....
Check Stock