ReviewsWood Railing System

Muzata 32Pairs Cable Railing Kit 1/8" Swage Toggle Turnbuckle Hardware T316 Stainless Steel for Wood Post WoodEasy System Angle 180° Adjustable Stairs Deck 32 Cable Lines CK07 NN1,CA4 CA5

  • Multi-Angled and Wide-Adjustment -- This cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The multi-angle feature and adjustable closed-body enables the turnbuckle to rotate from 0-180 degrees and adjust freely from the max length of 10.1 inch to the min length of 6.8 inch. Package includes:32pcs turnbuckles, 32pcs terminals, 130pcs screws,1pc cutter,1pc bent wrench.This package can make 32 cable runs.
  • Clean Look and Durability -- This cable railing hardware has a clean looking. It's made of T316 stainless steel, which has excellent resistance to rust and seawater and is ideal for indoor and outdoor, even coastal applications. The maximum span between two end posts is 30Ft. For code compliance, post spacing is recommended to be 3-4 ft, and cable spacing 3 inch to pass the 4" sphere test.
  • Easy to install -- This cable railing kit does not require any pre-drilling and can be simply installed by tightening the screws. The wide adjustable range makes installation easier, especially for beginners, who might not cut the cable to the precise length. Apply for both wood posts and wood posts with sleeves.
  • Pre-Designed System -- We pre-designed a WoodEasy cable railing system to help you construct a beginner-fri....
Check Stock

Muzata 40Pack 10 30 35 Degree Angle Adjustable Protector Sleeve for Wood Post Stair Railing for 1/8\ Wire Rope Cable Railing T316 Stainless Steel CR68,CP1

  • ...asier to stretch cable through posts and also help to maintain proper cable tension.Package includes: 50Packs Protective Sleeves, 1pc drill bit(9/32”).
  • Clean Finished Look-- The protector sleeves can cover the ragged holes after drilling and create a clean look, adding a nice touch to the overall look of your deck railing. The package includes a matching drill bit to help you drill holes easily.
  • Marine Grade -- This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System -- We pre-designed a WoodBudget cable railing system to help you construct a cost-effective system. It includes 1/8" swage lag screw Muzata CK17, level protector sleeve MUZATA CR13, angled protector sleeve MUZATA CR68, 1/8" wire rope MUZATA WR01,hydraulic crimper and cable cutter MUZATA CK12, drill guide MUZATA CT09.(Please note that the package only contains contents as specified in bullet point 1. Other stuff mentioned is not inclu....
Check Stock

BLIKA 65 Pack Stainless Steel Protector Sleeves for 1/8' 5/32' or 3/16' Deck Cable Railing, for Wood/Composite Posts, T316 Marine Grade, Cable Railing Protector Sleeves

  • Applications: This Stainless Steel Protector Sleeves for 1/8" 5/32" or 3/16" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • Material: Stainless Steel T316 Marine Grade,High tensile strength and anti-fatigue strength Weatherproof..
  • Size: Suitable for 1/8" 5/32" or 3/16" cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.48 inch, Required Hole Diameter = 0.258 inch..
  • Easy to Install: This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Cable railing system requires hardly any maintenance..
  • Package Includes: 65 Pcs Stainless Steel Protector Sleeves and A Free Drill Bit..
Check Stock

Muzata 10Pairs Cable Railing Kit 1/8 Swage Toggle Turnbuckle Hardware T316 Stainless Steel for Wood Post WoodEasy System Angle 180° Adjustable Stairs Deck 10 Cable Lines CK07 NN1,CA4 CA5…

  • Multi-Angled and Wide-Adjustment -- This cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The....
  • Clean Look and Durability -- This cable railing hardware has a clean looking. It's made of T316 stainless steel, which has excellent resistance to....
  • Easy to install -- This cable railing kit does not require any pre-drilling and can be simply installed by tightening the screws. The wide adjustable....
  • Pre-Designed System -- We pre-designed a WoodEasy cable railing system to help you construct a beginner-friendly wood system. It includes 1/8" toggle....
  • Why Choose Us -- MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation....
Check Stock

BLIKA 120 Pack Stainless Steel Protector Sleeves for 1/8' Wire Rope Cable Railing, Cable Railing Protector Sleeves, Deck Cable Railing Kits

  • Applications: This Stainless Steel Protector Sleeves for 1/8" Cable Railing. And used on wood/composite posts to prevent the cable from wearing into the wood. Perfect for planning your own cable railing project, good for indoor or outdoor applications..
  • Material: Made of Stainless Steel T316 Marine Grade, High tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance..
  • Size: Suitable for 1/8" cable railing. Overall Length of Sleeve = 0.8 inch, Flange Diameter = 0.474 inch, Required Hole Diameter = 0.251 inch..
  • Feature: This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • Package List: 120 Pcs 1/8 inch Stainless Steel Protector Sleeves and A Free Drill Bit..
Check Stock

Muzata 100Pack T316 Stainless Steel Protective Sleeves Cable Railing Kit Hardware for Wood Posts for 1/8" Wire Rope Cable T316 Marine Grade Deck Railing CR13,CP1

  • ...asier to stretch cable through posts and also help to maintain proper cable tension.Package includes: 100Packs Protective Sleeves, 1pc drill bit(9/32”).
  • Clean Finished Look- The protector sleeves can cover the ragged holes after drilling and create a clean look, adding a nice touch to the overall look of your deck railing. The package includes a matching drill bit to help you drill holes easily.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air.【Muzata's Guarantee】: Please feel free to contact us if you find any quality problems after installation. We'll provide you with the most attentive after-sales service.
  • Pre-Designed System - We pre-designed a WoodBudget cable railing system to help you construct a cost-effective system. It includes 1/8" swage lag screw Muzata CK17, level protector sleeve MUZATA CR13, angled protector sleeve MUZATA CR68, 1/8" wire rope MUZATA WR01,hydraulic crimper and cable cutter MUZATA CK12, drill guide MUZATA CT09.(Please note that the package only contains contents as specified in bullet point 1. Other stuff mentioned is not include....
Check Stock

Wayska 60 Pack T316 Marine Grade Stainless Steel 30 Degree Angle Beveled Protector Sleeves, Wood Post Protector for 1/8" Wire Rope Cable Railing, Come with a Free Drill Bit

  • 【High Quality Material】- This 30 degree 1/8” wood post protector is made of T316 marine grade stainless steel, high tensile strength, anti-fatigue strength and waterproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance. .
  • 【Compatibility & Parameter】- These stainless steel protector sleeves suitable for 1/8”cable railing, perfect for outdoor and indoor cable railing system. Tilt Angle = 30 Degree, Overall Length of Sleeve = 1.1", Sleeve Diameter=0.28",Flange Diameter =0.58"(The longest diameter of an ellipse)/0.51"(The shortest diameter of an ellipse), Drill Bit Diameter = 7mm..
  • 【Easy to Install】-This high quality metal is built to withstand extreme coastal and corrosive environments. Choose between kits for metal post or kits for wood posts. Easy to install and provides a stylish and contemporary finish to any project, whether used indoors or outdoors, residential or commercial..
  • 【Package Content】- 60pcs 30 degree angle cable protector sleeves + 1pcs drill bit..
Check Stock

Muzata 40Pack Cable Railing Kit Protector Sleeve Adhesive Grommet Protective for 1/8\ 5/32\ Wire Rope Wood Metal Posts T316 Stainless Steel Cable Deck Stair Railing CR66,CP2

  • Clean Finished Look - The protector sleeves could be used on INTERMEDIATE posts to cover ugly holes and present a clean look of your deck railing. They can also work with cable railing kit on END posts to for a neater look. Please note that adhesive sleeves are ONLY for decorative function, not for load-bearing applications. Package includes: 40pcs washers and 80pcs adhesives (Extra adhesives as backup and do not throw them away).
  • SPEC&Application - ID-3/16"(4.5mm), OD-5/8"(16mm), thickness-1/32"(1mm). These adhesive washers work for both wood and metal posts, fit 1/8" 5/32"cable on level applications, ONLY fit 1/8" cable on 30°angle. Please check the image to find the compatibility table for further models. Cable railing kits Muzata CR26 is recommended to work with CR66 to let your cable railing system look neater.
  • Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you get a fully customized project, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sl....
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • ... firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we recommend our patented swage lag screws MUZATA CB24. For angled stairs, drill guide MUZATA CT09 is necessary to drill holes.
  • Pre-Designed System-To help you construct a cable railing system, we pre-designed a ....
Check Stock

Muzata 20Pack 1/8\ Invisible Cable Railing Kit Swageless Lag Screw Cable Genie Tensioner Hidden T316 Stainless Steel for 4\-8\ Wood Posts Deck Stairs CB16, CV1 CG1

  • ...spinning when tightening. Package includes 20packs tensioners, 20pcs loop sleeves ,60pcs jackscrews, 20pcs adhesive sleeves, 1pc drill bit,1pc allen wrench.
  • Swageless and Reusable - With the patent swageless design, you don’t need swaging, which saves your time and efforts, also expenses of the crimper. Most cable railing hardware is irreparable after swaging with wire rope if you get a wrong measurement or need adjustment. However, this lag screw can be reused by unscrewing the jackscrews and adjusting the cable length whenever you want to remeasure or rebuild.
  • One-Post Corner Solution - With a well-designed compact body, you could use two terminals at one corner post of 4”x4” to 10”x10”, and they won't with each other. It also work on both level and angled sections without angled washers. It is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal areas. (Note: For one post corner solution,CB16 can only apply for the actual size of wood post over 4" ).
  • Pre-Designed System - We pre-designed a CableGenie cable railing system to help you construct a hidden wood system, which includes swageless cable railing kit CB16,1/8” wire rope WR02, adhesive sleeve C....
Check Stock

Muzata 20Set 1/8" Cable Railing Kit Hardware Heavy Duty Turnbuckle M5 Eye to Eye for Wood Post Wire Rope Stainless Steel Angle Adjustable WoodLoft System Deck Stair 20 Cable Lines CK01,CA4 CA5

  • Industrial style - We took clues from old factories and built this aesthetic industrial interior design system. It is great for build a Wood cable railing system on decks and stairs. It can also act as turnbuckles in clotheslines, picture hanging, string lights, etc. Package Includes: 20pcs M5 eye to eye turnbuckle, 40pcs thimbles, 40pcs eye straps, 40pcs aluminum sleeves, 80pcs screws. This set can build 20 cable runs, including tensioners and terminals.
  • Multi-Angle and Wide-adjustment - The multi-angle turnbuckle could be rotated from 0-180 degrees, it is ideal for both level and angled sections on your deck and staircase. This cable railing kit is designed with a wide adjustable open-body with a wide adjustable range turnbuckle from the max length of 7 inch to min length of 5 inch that is friendly to beginners.
  • Cost-effective and Durable Material - This cable railing kit is a great choice to build cable railings with a low budget. This cable railing fitting works with OD 1/8" cable. This turnbuckle for cable wire rope is made of quality T304 stainless steel and it is durable. Applicable for both indoor and outdoor uses. Please note it can't be uesd for wet and salty coastal areas.
  • Pre-Designed System - We pre-designed a WoodLoft cable railing system ....
Check Stock