ReviewsWooden Pla Pro

JAREES Clear PLA Plus(PLA+) 3D Printer Filament,Transparent PLA Pro Printing Filament 1.75mm 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm

【Toughness Enhanced PLA Plus filaments 1.75】JAREES PLA Pro is up to 5 times tougher while retaining all the PLA advantages: excellent adherence, no warping, beautiful finish quality, and broad compatibility..
【Good Layer Bonding 】Good layer bonding strength make parts stronger. JAREES PLA+ has better overhang properties that leave less stringing on the final print..
【Vacuum Packing】Vacuum sealed to maintain a low level of moisture content. Please keep it dry and dust-free after after opening the sealed package to prevent filament from becoming brittle or jamming the nozzle..
【Recommend Settings】Recommended Extrusion/Nozzle Temperature：195℃-240℃. PLA PRO filament dimensional:1.75mm,accuracy +/-0.02mm,1kg(2.2lbs)..
【100% Satisfactory Service】No matter when or why you need to replace or refund we will help! Free replacement for broken vacuum package or any other quality issue..

Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament Bundle

A 3D Printer accessories combo - 1.75mm Dark Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
PLA PRO Filament Specs: Dark Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any R....

Check Stock

eSUN PLAPlus Filament, Black, 1 kg

1Kg net (Approximately 2.2 lbs) filament with clear Spool.
eSUN PLA pro 3D printer filament vacuumed sealed with desiccant. Superb layer bonding. Several times stronger than PLA.
Recommended extrusion/nozzle temperature 210C - 225C, about 20 celsius higher than regular PLA.
Spool Diameter: 8" - Spool Width: 2.50" - Spool hub hole Diameter: 2.05" - inner circle Diameter: 3.5".

Check Stock

PLA Max PLA + Bone White PLA Filament 1.75 mm 3D Printer Filament 1KG 2.2LBS 3D Printing Material Stronger Than PLA Pro PLA Plus Normal PLA Filament CC3D Ivory White Bone Color

New Arrival:PLA MAX Filament is made of high-quality Polylactic Acid and with reinforcement technology..
Have higher strength and better toughness,excellent thermal stability than ordinary PLA..
PLA MAX is an upgraded version of PLA Pro filament..
PLA Max filament is different from ordinary PLA, printing temperature is 10-15℃ higher.Especially when printing the first layer..
Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament.

Check Stock

MYNT3D Super 3D Pen + 10 Color PLA Filament + DesignPad Mat Kit

Everything you need to create like a pro: bundle complete with Super 3D Pen, PLA filament refills and mat kit.
Super 3D Pen: features stepless speed control for enhanced flow regulation, temperature adjustability for ABS or PLA and replaceable sealed nozzle....
PLA Filament Refills: Highest quality vacuum sealed PLA in colors blue, green, red, yellow, orange, pink, black, tan, brown and gold.
DesignPad: double sided silicone drawing surface with channels let you design and create perfect geometric shapes.
FreePad: custom formulated transparent drawing surface with ideal adhesion so you can trace your favorite patterns, drawings or create your own....

Check Stock

4 Spools of 3D Printlife Filament Bundle with Dremel Digilab 3D45 Award Winning 3D Printer, Idea Builder with Heated Build Plate to Print Nylon, ECO ABS, PETG, PLA at 50 Micron Resolution

4 spools of 3D Printlife filament bundled with the Dremel 3D45 printer, granted the PCMag 2018 Editors' Choice Award. Equipped with a heated build plate, all-metal hot end, 4.5 inch color screen, wifi connectivity, and much more, the 3D45 is perfect for the classroom..
Easily removable glass build plate heated up to 100°C and all metal 0. 4mm nozzle heated up to 280°C. Windows requirement-Windows(7,8,8.1,10). MAC requirement-MAC OS X (v10.9+) 5-inch full color touch screen with intuitive icons for easy setup and operation. Go from unboxing to your first print in less than 15 minutes.
Fully enclosed sturdy plastic design with a 6. 7" x 10" x 6" build volume for better prints, better safety and less chance for warping. A carbon filter and particulate filter are built-in as well. Wi-Fi connectivity, built-in HD camera and included remote printing software so you can print and monitor your prints from anywhere. You can also print over a local network without internet, or via USB.
4 Free spools include 3D Printlife's impact modified Pro PLA, a professional grade PLA filament upgraded and optimized for 3D printing. Pro PLA features premium PLA resin slightly modified with a revolutionary bio-based plastic that increases overall strength, impact resista....

Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - White

PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....

Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Olive Green

PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....

Check Stock

Inland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Black

PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....

Check Stock

JAYO 3D Printer PLA Filament, 1.75mm PLA Filament Dimensional Accuracy +/- 0.02mm, 1KG Spool 3D Printing Material fit for FDM Printers, PLA Candy Red

【More easier & Smoothly & Odorless】JAYO 3D FDM PLA Filament is easier to print, odorless and prints well. JAYO PLA Filament makes 3d printing smoother..
【High Precision +/- 0.02mm Tolerance】 JAYO PLA Filaments have high precision (Tolerance Level : ± 0.02mm). The full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
【12 Months Warranty & Friendly After-Sales Service】 N.W 1KG PLA, welcome guide, 12 months warranty, and friendly after-sales service. Let’s buy it now!.

Check Stock

PLA Plus White and Matte PLA Black, Duramic 3D Printing Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm

...-month free trial, Lifetime Quality Promise and Money-back Service if you’re not 100% satisfied. Package Includes: 2 x 1kg Spool of 1.75mm PETG filaments, 2 x Resealable aluminum bag with desiccant for better storage of unfinished spool. Professional printing advice from technique support team..
【Premium & Tough PLA Plus】 Known as the flagship product of Duramic 3D, PLA Plus filaments (PLA+) 1.75mm are made of USA high-purity raw material from Natureworks. Duramic 3D PLA Pro filaments feature 8 times impact strength, which is perfect for printing functional models with higher toughness need..
MATTE FINISH-The new series of Matte PLA filaments are designed with matte finish, if you need a model not that glossy, this matte PLA series are your top choice..
ACCURATE&CONSISTENT DIAMETER - Duramic uses digital caliper system which measures the diameter 5000 times/s and adjusts them automatically, with tolerance 100% ±0.05mm, 99.9% ±0.04mm, 99% ±0.03mm and 97% ±0.02mm..
USER-FRIENDLY & COMPATIBLE - Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling..

Check Stock