ReviewsWoodriver Miter Max Corner Clamp

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Duck Hunting T Shirt - Seven Drakes by Committed Waterfowl

  • 【Wide Compatibility】DW715 12" compound miter saw, DW DWS780 type 1, DWS782 sliding miter saw..
  • 【Note】Not fit: DW703, DW705, DW708 12" miter saw, DW713 10" saw, DW716 !!!.
  • 【Premium Quality】Table saw bag dust is made of healthy and environmentally friendly material, can be recycled many times.
  • 【Easy to Install】As long as you have the plastic receiver with the wire and the sawdust bag is attached to the receiver with the plastic clamp,....
  • 【Keep Cleaner】Captures sawdust in miter saw bag universal when you work.keep your shop and your work surface cleaner.Prevents dust from catching....
Check Stock

Gohelper Miter Saw Protractor Angle Finder Tool Guide case, 7 inch Aluminum Measuring Miter Gauge Protractor Inside & Outside Corner Angle Finder Protractor for Woodworking, Metal, Crown molding

  • Accurate Measurement: The miter saw protractor angle finder provides two scales: single cut and miter cut, external scale to measure a single cut and internal scale to measure a miter cut, conversion table which allows values of the spring and corner angles being converted into mitre and bevel angles..
  • Exquisite Craftsmanship: The O-ring design makes the saw protractor angle finderrotate full 360 degrees, ensures mitre saw protractors fit the corner smoothly when doing measuring operation, precise read on inside or outside corners. precision laser engraving scale ensure the dial is clear and easy to read..
  • Excellent Material: The miter saw protractor tool is made of aluminum alloy, which has strong wear resistance and corrosion resistance, expand itself service life, 7inch size and lightweight material makes it easy to carry..
  • 4. Wide Applications: the miter saw protractor guide can perform applications, such as measuring external angles, measuring internal angles, and measuring height angles, it is suitable for saw protractor for woodworking, metalworking, miter single cut, miter cut, crown shaped, pipe, and other carpentry applications..
  • Quality Assurance: We have great quality aluminum saw protractor, if you have any questions or problems in the proce....
Check Stock

Trend UVJS/TG/JIG Varijig Tenon and Grooving Jig

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Evolution Power Tools R185SMS+ 7-1/4\ Multi-Material Compound Sliding Miter Saw Plus

  • Without changing blades, This saw is designed to cut a wide range of materials.
  • Powerful 10 amp hi-torque motor with optimized gearbox & blade system.
  • Includes laser guidance, 10 ft power cord, 3 piece Clamp, integrated carry handles, and dust bag.
  • 8- 1/4in x 2- 1/2in max cross cut capacity with a 0° - 45° bevel tilt and a 50˚ - 50˚ miter that covers all common cutting angles accurately.
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

POWERTEC MT4000MBA Miter Saw Stand Mounting Brackets – Set of 2

  • INCLUDES: (2) Miter Saw Stand Mounting Brackets and mounting hardware.
  • FUNCTION: The perfect OEM replacement, this bracket assembly utilizes tool mounts to allows you to attach and detach your saw and power tools from your stand. Extra sets will allow you to quick change multiple tools..
  • DESIGN FEATURES: Ergonomically designed clamp handles for comfortable operation, along with a heavy-duty, durable steel construction featuring a black powder coated finish to withstand long-term wear and tear.
  • NON-MARRING: Equipped with premium plastic feet that can be used off the stand with level base to protect the brackets and prevent your work material from scratching.
  • COMPATIBILITY: IMPORTANT check the dimensions listed in the attached images to determine if these brackets fit your application. Fits miter saw stand frames made from 1-1/2” steel tubing with an overall width of 7” and can be adjusted +, - ½” Works with POWERTEC Deluxe Miter Saw Stand with Wheels and 110V Power Outlet (MT4000), along with the Ryobi Miter Saw Stand, and other similarly sized popular brands of miter saws stands..
Check Stock

Xcalibur Tooling Heavy Duty Tenoning Jig for Table Saw & Cutting Tenons - Versatile & Sturdy Woodworking Tool (Pack of 1)

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock