ReviewsWoodworking Angle Finder

ZX-1 Center Scriber Woodworking Scriber Center Line Marking Tool Easy to Find the Exact Center and Offset Lines Red

【Material】This measuring tool is made of high-quality aluminum alloy material, with high hardness, wear resistance and durability. And it is small....
【Good for Woodworing】The center finder scribe woodworking accessory is a perfect woodworking marking tool that can be firmly fixed on the wooden....
【Small】Simple and fast, and it can mark soft metals and woods, which is very suitable for finding the precise center. Can be widely used in....
【Use Range】The length Approx 120mm, and the center point can be found accurately under the length of 95mm..
【Excellent Masurement】Accurate scale, accurate angle measurement. It is very suitable for woodworkers to find the precise center at work, improve....

Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....

Check Stock

BOSCH 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL

VERSATILITY: The Bosch GAM 270 MFL provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level..
MEMORY: This angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite..
DISPLAY: Easy-to-read illuminated, rotating flip display for the inclinometer and angle finder. The miter cut calculation has an input measurement from 0-270 degrees...
DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
COMPLETE: The Bosch GAM 270 MFL includes a 5-in-1 digital angle finder, 24 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..

Check Stock

Oumefar Aluminium Alloy Miter Bar Slider Table Saw Tie Rod Gauge Rod General Guide Rail Slide Table Saw Accessories Woodworking Tool Durable in Use(450 Slider)

Wide Application: Miter saw protractor #505P-7 replacement widely use in woodworking, plumbers, and all building trades..
Laser Dial:Laser carving dial, accurate and clearly Dial, easy to read, use velvet bag packaging, well protect the dial..
7.3 Inch Miter saw protractor, you can put it in the bag or pocket, easy to carry..
360-Degree Measurement:360 - degree rotation can measure different angles.Inside & Outside miter angle finder..
Simple Operation: Direct read, setting the cut saw angle.But It's not an instrument that measures the angle of bending, it just helps you cut some standard angles..

Check Stock

BOSCH 4-in-1 Digital Angle Finder GAM 220 MF

VERSATILITY: The Bosch GAM 220 MF provides four tools in one including an angle finder, miter calculator, protractor and level..
MEMORY: This angle finder provides angle memory, to provide the same angle measurement in different areas of the jobsite..
DISPLAY: Easy-to-read illuminated, rotating flip display. The miter cut calculation has an input measurement from 0-220 degrees.
DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
COMPELTE: The Bosch GAM 220 MF includes a 4-in-1 digital angle finder, 16 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..

Check Stock

4 Inch Marking Center Finder Stainless Steel Center Scriber Marking Centerline Tool Woodworking Center Gauge Line Scriber Center Finder Ruler for Woodworker Carpenter

Use tip: it is recommended to use this center finder in conjunction with a 2B pencil, which is very suitable for determining the precise center of the....
Size detail: the steel scribe tool is measured about 5.7 x 0.2 x 0.07 inch, small and compact design is very suitable for finding the center of the....
Material: the center finder tool is made of stainless steel, which is sturdy, reliable, labor-saving, with high measurement accuracy, easy to operate,....
Designed for woodworking: woodworking center gauge slides very smoothly and protects your working fingers from burrs, suitable for woodworking work.
Apply to: the center marking tool can be applied to mark the center of a board whose thickness or width does not exceed 4 inch.

Check Stock

Huepar Digital Angle Gauge Protractor, Electronic Bubble Angle Finder Dual Axis Level Box 0.01° Resolution V-Groove Magnetic Base&LCD Inclinometer Bevel Gauge with Audible Alert -Measures 0~360° AG03

... ✔️HOLD & ZERO FUNCTION: The current measurement value can be held on the display by short pressing the HOLD switch. The zero function enables users to set relative zero angle at any reference surface. This digital angle inclinometer provides convenience for Carpentry woodworking, construction, machinery, telecommunications, automobile etc..
✔️PORTABLE & PACKAGE CONTENTS: In compact pocket size, this angle finder can fit into tight spots to get perfect measurements needed. With handy design and a portable pouch, this sturdy precision tool can be taken to anywhere. Users can install the battery easily with the included screwdriver. The package contents include 2 x AAA batteries, a screwdriver, a portable pouch with belt loop, user manual..

Check Stock

MulWark 26ft Measuring Tape Measure by Imperial Inch Metric Scale with Both-Side Metal Blade,Magnetic Tip Hook and Shock Absorbent Case-for Construction,Contractor,Carpenter,Architect,Woodworking

【Patented measuring technology】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read..
【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage..
【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm..
【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION..
【Battery】CR2032 battery. Package contains battery..

Check Stock

Miter Saw Protractor Replace the Model #505P-7,Miter Angle Finder with Laser Dial for Carpenters, Plumbers and All Building Trades Also Invaluable for Home Use and Do-It-Yourselfers.

Wide Application: Miter saw protractor #505P-7 replacement widely use in woodworking, plumbers, and all building trades..
Laser Dial:Laser carving dial, accurate and clearly Dial, easy to read, use velvet bag packaging, well protect the dial..
7.3 Inch Miter saw protractor, you can put it in the bag or pocket, easy to carry..
360-Degree Measurement:360 - degree rotation can measure different angles.Inside & Outside miter angle finder..
Simple Operation: Direct read, setting the cut saw angle.But It's not an instrument that measures the angle of bending, it just helps you cut some standard angles..

Check Stock

Miter Saw Protractor Professional Miter Saw Protractor Angle Finder Replaces the Model #505P-7 Miter Saw Protractor with Measuring Rulers for Angle Finder Carpentry Crown Molding Tool Baseboard

PRECISE MEASUREMENT - This miter saw protractor angle finder is specifically designed to ensure a correct and precise miter angle finder with no....
FRIENDLY DESIGN - LUVRD professional miter saw protractor is not only an excellent replacement for 505p-7 miter saw protractor angle finder corner....
SUPERIOR QUALITY AND DURABILITY - This trig crown molding jig angle finder is durable and stronger than other pvc plastic miter angle gauge because it....
EASY TO USE - Owing to the adjustable and collapsible design, not only is this miter saw protractor angle finder easy to use, but also convenient to....
UNCONDITIONAL WARRANTY - LUVRD focuses on construction accessories, and we stand by our carpenter protractor, brings better alternatives for you in....

Check Stock

Digital Angle Finder Magnetic PT180 Table Saw Angle Finder Tool - Digital Inclinometer -4 of 90 Degree Finder Angle Cube Digital Protractor Bevel Gauge for Woodworking Micro Jig

【Accuracy】The digital angle finder with 360°(4*90°) measuring range ,Accuracy: 90°,±0.2°.One-button switching angle and slope With a resolution of 0.01 degrees, this digital angle finder will give you the details needed for even CAD or design purposes. The true accuracy of the digital angle meter is plus or minus 0.2° , the most important factor in the accuracy is the fact that it won’t go out of calibration over time..
【V-Groove magnetic design】The digital angle finder has strong stable magnetized base, allowing you attach the digital angle finder directly to any ferrous metal surface, even a curved surface.The angle meter comes in a sturdy,thick plastic case,which is resistant to damage from being dropped of knocked around..
【Upgraded LCD Display】Upgraded LCD Display with high visibility reverse contrast,make the level box easier and clearer to read the values even work at night,and easier read in a small angle than other ones.The values on the level box display are auto-reverse to fit eyes for easy reading..
【Portable & Lightweight】The digital protactor has portable size,it is convenient to carry and co-work with other measuring tools and work in narrow place,and enlarge measuring range.The angle finder is powered by 2x AAA ba....

Check Stock