ReviewsWoodworking Dust Collector

WaleTale Vacuum Attachment Dust Containment and Safety System

  • INCLUDES: Mini Dust Hood with 4 Inch Dust Port (Black).
  • FUNCTION: Captures woodworking and workshop debris and wood chips when used with a wide assortment of dust collection setups (machines) - Can conveniently be placed behind, underneath or closer to the point of dust production.
  • FEATURES: Deep, wide-mouth design with built-in guard for larger pieces – Hood comes with (4) pre-drilled holes along the flange for quick and easy mounting and a built-in grate to protect your dust collector from large debris.
  • BUILD: Featuring a non-threaded, all-black ABS plastic construction, this dust hood was designed for durability and made to withstand the wear and tear commonly associated with abrasive dust extraction.
  • SPECIFICATIONS: Hood measures 13-1/2" x 7-1/4" | Flange 7/8" wide | Hood Opening Inside Dimension: 6-15/16" x 11-3/4".
Check Stock

POWERTEC 70276 4-Inch to 2-1/2-Inch Dust Collection Splitter Fitting

  • INCLUDES: (1) 4” to 2-1/2” Dust Collection Hose Splitter.
  • FUNCTION: Allows you to connect a 4” ID dust hose with two 2-1/2” ID dust hoses, while providing minimal suction loss from your assorted connections.
  • APPLICATIONS: These dust collection fittings are perfect for optimizing the effectiveness of your dust collector system when paired with standard shop vac or other 2.5” hoses.
  • BUILD: This y-adapter splitter is made with impact resistant ABS plastic for long-term durability and a heavy duty profile commonly needed for workshop and woodworking set-ups.
  • PORT DIMENSIONS: 4” Nominal OD – 3.902” or 3-29/32”, ID 3.733” or 3-47/64” 2-1/2” Nominal OD – 2.5” or 2-1/2”, ID – 2.32 “or 2-21/64”.
Check Stock

POWERTEC 70277 Dust Collection Reducer, 6-Inch OD to 4-inch OD

  • INCLUDES: (1) Dust Collector Hose Reducer.
  • FUNCTION: Provides a reliable connection between a 6” dust collection hose to a 4” dust collection hose (not meant for PVC pipe or other plastic fittings).
  • QUALITY BUILD: Made with premium ABS plastic for strength, durability and optimal impact resistance – commonly needed for workshop and woodworking applications.
  • FEATURES: A flange that allows for a quick connect and disassembly for your convenience.
  • DIMENSIONS: 4” Nominal end actual OD size 3.93” and ID size 3.73”, 6” Nominal end actual OD size 5.93” and ID size 5.70”.
Check Stock

Dust Collection Cone Reducer 4-Inch to 2 1/2-Inch plus 5 Vacuum Hose Adapters Fits 1 1/16 to 1 3/4 inches Includes Shop Vac Adapter 2 1/2 to 1 1/4 inch and 1 Rubber Reducer

  • Dust Collector Accessories - Included is 6 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Several for a small dust collection system. Details in photos..
  • Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose. Durable ABS plastic. NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly.
  • Useful adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2.5 inch shop vac dust collector hose branch line..
  • Aslo, a shop vac hose adapter to go from 2.5 inch to 1.25 in hose and a rubber step adapter for many purposes that goes from 1.06 inches OD to 1.61 inches OD. More details of the other adapters in photos..
  • From 4 inch dust collection hose to 2 1/2 dust collection hose to use with your shop dust collectors for dust control. Also smaller adapters for your shop dust collection system or just to connect your vacuum to an attachment(NOTE- 2 Adapters come already connected together but come apart easily)..
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

Oneida Air Systems - Mini-Gorilla Cyclonic Dust Collector (220V)

  • 220 V Delivers up to 600 Actual CFM through 5” inlet – ample airflow for any woodworking tool with a 4”-6” port, including planers, jointers, lathes, drum sanders, etc. Includes an Inlet Adapter Kit for connections with 4″ hose..
  • Powerful, portable, and awarded “Best Tool” by Fine Woodworking Magazine, the Mini-Gorilla Cyclone Dust Collector is the tool of choice for small shops looking for a mobile solution that never compromises on air performance or filtration..
  • Lightweight and portable design with small footprint, lockable non-marking wheels, and 22-gallon mobile dust bin with liner bag holder and fill level viewing window. Ideal for smaller workshops with limited space. Low pitch (80.5 dBA at 10 ft) noise level for operator comfort..
  • HEPA-Grade Filter Media with high-efficiency (>99%) cyclonic pre-separation that significantly reduces the need for filter cleaning and maintenance. Filter features non-stick membrane and vacuum hose port for easy cleaning..
  • Patented and made in the USA with industrial grade 1.5 HP US-made fan blower motor that’s built to last a lifetime. US Pat. 7824457, D604464, 8491686, 8377160, 8496719, 7937803.
Check Stock

Cyclone Dust Collector 2.0” DIY Dust Separator Extractor with 2 Filters, Shop Dust Collector Accessories Cyclone Vacuum Cleaner Filter, for Woodworking, Ash, Metal Shavings, Grain etc

  • ... The diameter of the air inlet and outlet of our dust collector is 2.0”, if you are 1.25”, 1.5”, 2.5” or other caliber vacuum cleaners, you can buy a caliber converter yourself. Total dimensions are approx. 30 cm (H) x 14cm (W). Very compact and space-saving..
  • FILTER : No. 1 filter element: Through Hole (For woodworking sawdust, dust, etc.), filter element with large holes at the bottom, No. 2 filter element: Blind Hole (Only for ash), filter element without large holes (need to be equipped with a motor above 1200W). Only applicable to ash, such as: stove ash, grass ash and other burning residues (To avoid blockage, remember not to use it in other scenarios)..
  • SUITABLE for STURDY BUCKET: Because our product has a good seal, we hope you can notice that when the vacuum cleaner is sealed with the bucket, the suction will be very strong, thinner barrels are relatively difficult to withstand strong suction, so it is more prone to the deformation of the bucket. In this case, it is only necessary to replace the bucket with a stronger one. At the same time, it also shows that this has nothing to do with the size of the dust collector..
  • WET OR DRY – This simple and efficient design can be adapted for use with more make, size, or model wet/dry vacu....
Check Stock

ABESTORM 360 Degree Intake Air Filtration System Woodworking -(1350 CFM) Hanging Air Filter with Strong Vortex Fan for Wood Workshop, Garage, Shop Dust Collectors, Up to 1700 sq. ft, DecDust 1350

  • ...360 degree air filtration system】DecDust 1350 workshop dust collector is designed with 360 degree air inlet and equipped with strong vortex fan, which generates strong airflow when working and can remove large amount of dust and wood chips,it has two speed options (1050/1350 CFM) ideal for wood carving workshop, woodworking sanding, turning, scroll sawing work, powder mixing, etc..
  • 【Dimensions | Specifications】Item Size-20.5” L x 20.5” W x 9.8” H | Electrical Requirements – 115V, 60 Hz, 1.5 A | Air flow – 1050/1350 cubic feet per minute | Cover rooms up to – 1700 sq ft. | Noise rating – 60 to 69 dBA| Item Weight -27 lbs| MERV-11 Filter-13.2″L × 9.5″ W× 1.5″H..
  • 【High Efficiency MERV-11 Air Filter】The 360 Degree Intake Air Filtration System is equipped with MERV-11 filter which can stop 90% of 3-10μm particles and 85% of 1μm particles. very suitable for wood carving, grinding, turning, circular saw work, powder mixing, etc..
  • 【Convenient Controls, Easy to Install】With a hook and chain, the shop dust collector is easy to move and can be hung from the ceiling in the shop or placed on a workb....
Check Stock

POWERTEC 70169 Mini Gulp Dust Hood Collector with 4\ ID Port - ABS Plastic Fitting for Woodworking Dust Collection Hose

  • INCLUDES: Mini Dust Hood with 4 Inch Dust Port (Black).
  • FUNCTION: Captures woodworking and workshop debris and wood chips when used with a wide assortment of dust collection setups (machines) - Can conveniently be placed behind, underneath or closer to the point of dust production.
  • FEATURES: Deep, wide-mouth design with built-in guard for larger pieces – Hood comes with (4) pre-drilled holes along the flange for quick and easy mounting and a built-in grate to protect your dust collector from large debris.
  • BUILD: Featuring a non-threaded, all-black ABS plastic construction, this dust hood was designed for durability and made to withstand the wear and tear commonly associated with abrasive dust extraction.
  • SPECIFICATIONS: Hood measures 13-1/2" x 7-1/4" | Flange 7/8" wide | Hood Opening Inside Dimension: 6-15/16" x 11-3/4".
Check Stock

POWERTEC 70228 2-1/2 Inch Y-Fitting Dust Collection Hose Connector, Clear Color

  • INCLUDES: 2-1/2” Dust Collection Hose Y-Fitting Connector.
  • FUNCTION: Facilitates a dual hose branch connection from a single main hose line. This versatile fitting enables you to connect two machines - or two hoses from the same machine – to your dust-collection system’s hose network. Maintains the integrity of your dust collector’s suction capacity. Easily tailor your network to the specific requirements of your shop setup and project needs..
  • FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 2-1/2” ID ports..
  • VISIBILITY: Premium, clear-plastic tubing lets you clean with clarity, spotting and clearing blockages that may occur at the site..
  • DIMENSIONS: All three 2-1/2 Inch nominal end measure 2-31/64 inch OD and 2-7/32 inch ID | Material Thickness: 1/8 inch.
Check Stock

POWERTEC 70207 4 Inch Flexible Dust Collection Hose and Fittings Kit

  • INCLUDES: (1) Flexible Dust Collection Hose 4” x 12” | (2) Screw End Fittings, (1) Oval Tapered Nozzle and (1) Rectangular Nozzle.
  • FUNCTION: A complete dust collector hose kit that possesses a versatile assortment of fittings intended to promote project flexibility and optimal airflow to your dust collection system.
  • HARD TO REACH: A flexible hose is designed with a 4” diameter for component compatibility, and a 12” length that can expand up to an impressive 36 inches for out-of-reach applications.
  • FITTINGS: Rectangular and oval tapered nozzles provide optimum adaptability with table saws, sanders, drill presses, routers, and other woodworking equipment.
  • QUALITY: The hose is made out of polypropylene (PP), with both pliable to rigid profiles – while the fittings are all constructed out of ABS plastic for heavy duty use and long-term durability.
Check Stock