ReviewsWoodworking End Mills

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Wood Scriber Tool,Woodworking Compass Scriber Aluminum Alloy Adjustable Arc Drawing Ruler Drawing Circle Ruler Marking Gauge Metric and Inch Dual-Scale Fixed-point Marking Carpenter Tools (Large)

  • 2022 Latest Version of Woodworking Compass Scriber: Just locate axis point at the center of your arc or circle on the wood and then adjust the radius size,you can draw different sizes of the circles as your need. This Woodworking Compass Scriber is a professional carpenter's compass for woodworking,metal processing or leather products..
  • DUAL-SCALE: This Woodworking Compass Scriber has Metric and imperial Dual-Scale,suitable for professional drawing..
  • Aluminium Alloy Material: This professional woodworking scriber line was made of solid Aluminum material,won't break from bending or rusting, more durable and sturdier than the plastic one..
  • Laser-engraved Circle Marking Gauge: Thanks to the laser-engraved markings, you'll be able to read the measurements clearly for years on end. They won't smudge, fade, or disappear..
  • Easy to Carry: The fixed pen can be and stored at the end of the main body, you can put it into your pocket ot bag..
Check Stock

Rockler Quick Release Woodworking Vise Clamps for Woodworking (12”) – Heavy-Duty Bench Vise Woodworking – Quick Wood Vise for Workbench – Easy to Install Workbench Vise with Hardwood Handle

  • Quick Release Vise: Sturdy guide rods keep the clamp faces neatly parallel, while the quick-release feature lets you slide the woodworking vise all the way open with an easy 1/4 turn..
  • Unique Design: This unique end vise for the workbench ensures smooth & efficient operation making this woodworking vise the most versatile and frequently used tool in your workshop..
  • Includes Hardwood Handle: The extra-wide 12" O.C. Guide rods provide maximum resistance to racking, while the extra-wide 17-1/2" woodworking bench vise handle plate delivers maximum stability to handle any project..
  • Widely Applied: The woodworking quick vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. This woodwork vise can also be used as a front vise.
  • Easy To Install: Our woodworking vise is easy to install with included instructions. Before installing carefully read the woodworking vise quick release PDF. (mounting hardware not included).
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

POWERTEC 71389 T-Track Mini Hold-Down Clamp, 3-5/8

  • INCLUDES: (2) Mini Hold Down Clamps for T-tracks/T-slots.
  • (2) 5/16-Inch-18 thread 3-1/2-Inch long T bolts.
  • FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies.
  • FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity.
  • DESIGN: Made from premium grade anodized aluminum with a lever shaped profile ensuring optimal leverage in addition to work piece accessibility.
  • VERSATILITY: Hold Down Clamp Set is ideal for work holding, positioning, and fixturing for many woodworking or metalworking applications, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills and more.
Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
  • The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

SHARS 1/4 X 1/2\ Cobalt Corner-Rounding END Mill 404-5851 P{

  • H.S.S. Corner Rounding End Mill Set Size from 1/16'' to 3/8'', 8 Pcs, 1011-0008.
  • 1/2'', H.S.S. Corner Rounding End Mills, 3/4'', Shank Dia, 1-1/2'' Cutter Dia, 3-7/8'' Overall Length, 1011-1234.
Check Stock