ReviewsWoofer Speaker Car Speaker

10-Inch Carpeted Subwoofer Tube Speaker – 500 Watt High Powered Car Audio Sub Bass Enclosure System with 2” Aluminum Voice Coil, 4 Ohm, Rear Vented Design – PLTB101

  • 500 WATT POWER: This high powered audio projection carpeted subwoofer tube enclosure system has a maximum power output handling of 500 watts so you can play your favorite tracks as loud as you want and with style.
  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 18.9” x 13.4” x 12.2” in inches.
  • 2” ALUMINUM VOICE COIL: This car speaker has a 2” aluminum voice coil with a 4-ohm impedance rating that compensates for the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • ADDITIONAL SUB-BASS RESPONSE: Featuring a bass reflex vent, this carpeted subwoofer tube speaker has additional response for low-frequency waves, allowing you to enjoy a much more bassy sound for your music.
  • BUILT TO LAST: Constructed with engineered 15mm particleboard, this tube speaker will surely prove its longevity for vehicle use. It also only weighs at about 14.55 lbs, offering little to no hindrance at all to the maximum weight of your vehicle.
Check Stock

10 Inch Car Subwoofer Speaker - 500 Watt High Powered Car Audio Sound Component Speaker System w/ 2 Inch High-Temperature Kapton Voice Coil, 85.6 dB, 8 Ohm, 60 oz Magnet - Pyramid PW1048USX

  • 500 WATT POWER: This high powered audio projection subwoofer system has a maximum power output of 500-watt peak power / 250 watt RMS so you can play your favorite tracks as loud as you want and with style.
  • NON-FATIGUING RUBBER SUSPENSION: The high-performance car woofer speaker has a non-fatiguing rubber suspension along w/ bumped & vented motor structure that completes your woofer enclosure system. Features 4.21” mounting depth for easy installation.
  • 2” KAPTON VOICE COIL: This car speaker has 2” high-temperature Kapton voice coil, 85.6 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • 10 INCH PAPER CONE: Pyramid follows the standard size for most car stereo systems & created this 10" black strong non-pressed paper cone driver perfect for new speaker construction, replacing worn or blown speakers in your favorite loudspeaker cabinet.
  • 60 OZ MAGNET STRUCTURE: This subwoofer speaker has a 60 oz magnet structure. The heavy-duty housing along w/ the stamped steel basket that provides a strong foundation. It is also super easy to install to your vehicle's sound system.
Check Stock

(4) KICKER 46CSC654 CSC65 6.5\ 6-1/2\ 300w 4-Ohm Car Audio Coaxial Speakers

  • Pair KICKER 46CSC654 CSC65 6.5" 6-1/2" 600 Watt 4-Ohm Car Audio Coaxial Speakers. Fits nearly every car made. Zero-protrusion tweeters to fit nearly any factory depth. Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion.
  • UV-treated poly-foam surround resists heat or direct sunlight. Large woofer magnet in a heavy-duty motor for ultra-clean bass. PEI-tweeter construction provides superb clarity. Neodymium tweeter magnets allow for increased volume in high frequencies.
  • Steel mesh grilles included for speaker protection. Dimension (L x W x H): 14.5 inch x 7 inch x 3.25 inch. Weight: 5 lbs. Speaker Design: 2 - way. Woofer Size: 6 1/4 in. (160 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohm. Peak Power: 300 Watts. Continuous Power (RMS): 100 Watts.
  • Sensitivity: 90 dB @ 1W1m. Effective Frequency Range: Hz 40-20k. Mounting Hole Diameter: 4 1/3/16 (123 mm). Top Mount Dept: 3/8 in. (9 mm). Bottom Mount Depth: 1-11/16 in. (43 mm). Grilles. Tweeter Magnet Material: Neodymium. Tweeter Dome Material: PEI (polyether imide).
Check Stock

Goldwood TR12S 12″ Single Sealed Box Speaker Cabinet

  • Goldwood Sound TR12S single 12″ woofer sealed car enclosure, 12″ woofer hole is 11″ in diameter, built-in terminal with gold screw posts, fits most cars.
  • High quality MDF hardwood, enclosure volume is 1.25 cubic feet, height 13″ x length 16″ x top depth 12″ x bottom depth 15.5″, speaker mounting depth is 11.75″.
  • The front (where the woofer is loaded) is flat and the back is slanted, made of only the best black aviation carpet.
  • Ships fully assembled, simply drop in your woofer.
  • Use for car, truck, SUV or fixed installation speakers.
Check Stock

Pyle 8-Inch Carpeted Subwoofer Tube Speaker - 250 Watt High Powered Car Audio Sound Component Speaker Enclosure System w/ 1.5” Aluminum Voice Coil 4 Ohm 35Hz-800Hz Frequency LED RCA - Pyle PLTAB8

  • 250 WATT POWER: The high powered audio projection carpeted subwoofer tube enclosure has a max power output of 250W so you can play your favorite tracks as loud as you want w/ style. Equipped w/ built-in high output amplifier & RCA/speaker line input.
  • RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension that completes your woofer enclosure system. Total size measures 10.4” H x 20” W x 9.6” D. Also features blue LED light behind the grill.
  • 1.5” ALUMINUM VOICE COIL: This car speaker has a 1.5” aluminum voice coil with a 4-ohm impedance rating that compensates the undersized wire found in most cars. Ultimately reduces distortion so you can enjoy a crisp & clear sound.
  • BLUE POLYPROPYLENE CONE: Pyle follows the standard size for most car stereo systems & created this 8" high power 4-ohm subwoofer w/ blue polypropylene cone perfect for new speaker construction, replacing worn or blown speakers.
  • 35Hz - 800Hz FREQUENCY: The 1.5” aluminum voice coil provides the punch, while the bass reflex vent adds even more sub-bass, ultimately achieving a frequency response of 35 Hz to 800 Hz. It is also super easy to install to your vehicle's sound system.
Check Stock

Goldwood TR10F 10' Single Truck Box Speaker Cabinet

  • Goldwood Sound TR10F single slim 10" woofer sealed car enclosure, 10" woofer hole is 9.125" in diameter, built-in terminal with gold screw posts, fits most cars.
  • High quality MDF hardwood, enclosure volume is .7 cubic feet, height 15" x length 19.25" x top depth 5.75" x bottom depth 7.375", speaker mounting depth is 5.125".
  • The front (where the woofer is loaded) is flat and the back is slanted, made of only the best black aviation carpet.
  • Ships fully assembled, simply drop in your woofer.
  • Use for car, truck, SUV or fixed installation speakers.
Check Stock

KICKER 4 46CSC674 CSC67 6.75 6-3/4 300W 4-Ohm Car Audio Coaxial Speakers

  • Pair KICKER 46CSC674 6.75" 6-3/4" 600w 4-Ohm Car Audio Coaxial Speakers CSC674. Fits nearly every car made. Zero-protrusion tweeters to fit nearly any factory depth. Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion.
  • UV-treated poly-foam surround resists heat or direct sunlight. Large woofer magnet in a heavy-duty motor for ultra-clean bass. PEI-tweeter construction provides superb clarity. Neodymium tweeter magnets allow for increased volume in high frequencies.
  • Steel mesh grilles included for speaker protection. Dimension (L x W x H): 15 inch x 8 inch x 3.25 inch. Weight: 5 lbs. Speaker Design: 2 - way. Woofer Size: 6 3/4 in. (165 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohm. Peak Power: 300 Watts. Continuous Power (RMS): 100 Watts.
  • Sensitivity: 90 dB @ 1W1m. Effective Frequency Range: Hz 40-20k. Mounting Hole Diameter: 5 1/2 (140 mm). Top Mount Dept: 3/16 in. (4 mm). Bottom Mount Depth: 1-13/16 in. (47 mm). Grilles. Tweeter Magnet Material: Neodymium. Tweeter Dome Material: PEI (polyether imide). Tweeter Design: Balanced dome.
Check Stock

Pyle 6.5 Inch Mid Bass Woofer Sound Speaker System - Pro Loud Range Audio 300 Watt Peak Power w/ 4 Ohm Impedance and 60-20KHz Frequency Response for Car Component Stereo PLG64

  • AUTO SPEAKER SYSTEMS: Pyle GEARX series woofer is the latest series which have been designed and engineered for consistent and high performance. The 6.5 inch feature an eye-catching yellow CD P.P. cone for plenty of stiffness without added weight.Speakers maximum output power:300 watts.Impedance: 4 ohm.Power source type:Corded Electric.Speaker size:6.5 inches.
  • LOW IMPEDANCE: The 4 ohm component audio speaker compensates the undersized wire found in many of today’s cars. It also make the most of every 300 watts peak power your car stereo can deliver with rubber magnet boot cover.
  • MID BASS WOOFER: Pyle pro mid bass woofer sound speaker system has 30 oz. magnet structure and 60 Hz – 20 kHz frequency response that complete the package. It helps to provide smooth, loud and detailed sound.
  • POWERFUL FEATURES: The specially treated rubber surround keeps your speakers secure and extending the life of the product. A 1” high-temperature aluminum voice coil provides the richest sound, ensuring low distortion and providing an open sound stage.
  • WORRY-FREE SHOPPING: With the Pyle PLG64, we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked.
Check Stock

Goldwood Sound 160 Watts 8ohm Compression Midrange Speaker Driver Black (GM-500CD)

  • 2 Goldwood Sound XO-310 round 3-way speaker crossovers with terminal plates and circuit breakers, heavy duty ABS plastic housings, spring loaded red and black raw wire connectors.
  • 3-way wire harness, 18" straight pass through wires to woofer, 18" wires with resistor to the midrange, 24" wires with 4.0Mh capacitor to the tweeter.
  • Auto circuit breakers, all wires have male crimp clamps, overall measurement of 4.5" round, cut out measurement of 3.25" round.
  • Use for speaker cabinet, home speaker, car speaker, this listing and price is for 2 passive crossovers with terminal plates.
Check Stock

Goldwood TR8F 8' Single Truck Box Speaker Cabinet

  • Goldwood Sound TR8F single slim 8" woofer sealed car enclosure, 8" woofer hole is 7.125" in diameter, built-in terminal with gold screw posts, wire leads included, fits most cars.
  • High quality MDF hardwood, enclosure volume is .4 cubic feet, height 11.25" x length 15.25" x top depth 5" x bottom depth 7.25", speaker mounting depth is 4.75".
  • The front (where the woofer is loaded) is slanted and the back is flat, made of only the best black aviation carpet.
  • Ships fully assembled, simply drop in your woofer.
  • Use for car, truck, SUV or fixed installation speakers.
Check Stock

5” x 7” Car Sound Speaker (Pair) - Upgraded Blue Poly Injection Cone 3-Way 300 Watts w/ Non-fatiguing Butyl Rubber Surround 80 - 20Khz Frequency Response 4 Ohm & 1\ ASV Voice Coil - Pyle PL573BL

  • 80Hz - 20Khz FREQUENCY RESPONSE: Pyle, 5” x 7” three way sound speaker system has a 20 oz magnet structure, 1'' neodymium film dome midrange and frequency response. This car speaker is pack with exceptional 90dB (1w/1m) decibel sensitivity.
  • 4-OHM IMPEDANCE: This car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. The blue poly injection cone also looks great and allows your music to resonate with full power.
  • 1'' ASV VOICE COIL: Pyle car sound speaker system is capable of 1'' high-temperature ASV voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • 150W RMS AND 300W PEAK: This car speaker can provide up to 150 watts RMS or 300 watts peak power because it is 20 oz magnet structure. A set of one 5”x7” and one 6”x8”300-watt speakers both the high and low end for a fuller range sound.
  • LOUD AND CLEAR: Pyle car speaker were carefully combined to reproduce sound clearly with outstanding responsiveness. The non-fatiguing butyl rubber surround keeps your speakers secure as well as extending the life of the product.
Check Stock